• 유기물자원화
• /
• 제13권4호
• /
• pp.107-117
• /
• 2005

본 연구에서는 펜톤산화 공정을 축산폐수의 전처리 시스템으로 활용하고자 초기 pH, $H_2O_2/Fe^{2+}$ 비율, $H_2O_2/Fe^{2+}$ 약품주입량, 응집 및 침전을 위한 중화제 등과 같은 펜톤산화의 적정 운영조건을 도출하는 실험적 연구를 실시하였다. 적정 조건을 도출하기 위해 교반시험기를 이용하여 120 rpm에서 2시간 동안 각 조건을 변화시키면서 펜톤산화 반응을 진행한 후 2시간 동안 침전시켜 그 상등액의 잔류 과산화수소, $COD_{Cr}$, SS 등을 분석하였다. 실험결과 도출된 최적조건은 초기 pH는 4, $H_2O_2/Fe^{2+}$비율은 10:1, $H_2O_2/Fe^{2+}$ 약품주입량은 5,000/500mg/L 그리고 중화제로는 $Ca(OH)_2$가 양호한 것으로 나타났다. 이러한 최적 조건에서 펜톤산화에 의해 축산폐수의 $COD_{Cr}$ 제거율은 43% 그리고 SS는 84%의 제거율을 나타내었다.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.319-323
• /
• 2007

The Advanced Oxidation Process (AOP) is being increasingly used to oxidize complex organic constituents in treated effluents from domestic wastewater treatment plants. Generally, ${NO_3}^--N$ concentrations ranges between 5 and 8 mg/L for biologically well-treated effluents. However, nitrate ions, ${NO_3}^-$, affects on oxidation as not only a well-known strong absorber of UV light below 250 nm of wavelength but also as an OH radical scavenger. The objective of this study was to evaluate the AOP systems for degradation of 2,4-DCP, and to delineate the effect of nitrate ions on UV oxidation of 2,4-DCP by conducting a bench-scale operation at various reaction times and initial concentrations of $H_2O_2$. The experimental results indicated that 2,4-DCP could be completely oxidized by $UV/H_2O_2$ process with an initial $H_2O_2$ concentration of 20 mg/L at a retention time of 1.0 min or longer. Nitrate ions did not show any adverse effect on 2,4-DCP oxidation at this high $H_2O_2$ concentration, and the practical initial $H_2O_2$ concentration and reaction time for the 80% oxidation turned out to be 5 mg/L and 1.0 min, respectively.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.429-437
• /
• 2006

화학세정폐수에 함유되어 있는 citric acid의 효율적인 처리방안을 수립하기 위해 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용하여 각각 citric acid의 제거효율 및 그에 따른 전력소비량을 평가하였다. 그 결과 조사된 최적 처리조건에서 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용한 citric acid 농도에 근거한 TOC 제거효율은 각각 95.5%, 92.3%, 91.5%로 조사되었으며, 그에 따른 전력소비량은 $11.26kWh/m^3,\;3.85kWh/m^3,\;0.799kWh/m^3$으로 조사되었다. 이 결과에 의하면 세가지 광화학적 산화방법 모두 유기물질이 90% 이상 제거되어 citric acid의 분해에 효과적인 것으로 판단되었다. 그러나 Photo-Fenton 산화방법이 다른 방법에 비해 처리에 소요되는 반응시간이 짧은 것으로 나타났다. 또한 광화학적 산화방법의 운영비를 결정짓는데 중요한 요소인 전력소모량 측면에서도 Photo-Fenton 산화방법이 다른 방법에 비해 우수한 것으로 조사되어 본 연구에서 비교하는 세가지 방법 중 citric acid 처리에는 Photo-Fenton 방법이 효율적인면과 경제성면에서 가장 적합한 처리기술로 결론지을 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.443-444
• /
• 2007

• 한국식품영양과학회지
• /
• 제24권2호
• /
• pp.202-207
• /
• 1995

The effects of lipoxygenase, linoleic acid, tocopherol and pH on the co-oxidation of $\beta$-carotene in the aqueous system were studied. It showed that the co-oxidation of $\beta$-carotene was noticeable at both pH 7.4 and 9.0. As the concentraitons of linoleic acid and $\beta$-carotene increased, the rate of oxidation of $\beta$-carotene tended to be increased. However, $\alpha$- and $\delta$-tocopherol retarded the co-oxidation of $\beta$-carotene. As the concentrations of tocopherols increased, $\beta$-carotene was more stabilized, generally. But low concentration of $\alpha$-tocopherol(10-4M) acted more effective antioxidant than high concentration of it(10-3M) at pH 7.4. The antioxidant effect of tocopherol greatly depended on pH ; it was outstanding at pH 7.4.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1307-1318
• /
• 2000

원자력 발전소에서 발생되는 제염폐수에 함유된 Oxalic acid와 Citric acid를 고급산화방법(Advanced Oxidation Process) 중의 하나인 $UV/H_2O_2$를 적용하여 이들 물질의 분해특성 및 최적처리조건을 파악하고자 하였다. 이를 위하여 각각의 물질에 대하여 $H_2O_2$나 UV를 단독사용할 경우, pH 및 과산화수소의 주입량 변화, Oxalic acid와 Citric acid의 농도변화에 따른 분해특성에 대하여 조사하였다. $H_2O_2$나 UV만으로도 완전분해가 가능한 반면 Citric acid는 같은 파장의 UV만으로는 분해가 잘되지 않는 것으로 조사되었다. 또한 과산화수소와는 두 물질 모두 반응성이 없는 것으로 조사되었다. 산화공정에서 반응속도상수, 반응시간, 제거효율, 과산화수소 소모량 등에 대한 결과를 종합한 결과 Oxalic acid의 경우 pH 4 이하의 낮은 pH에서, Citric acid는 pH 4~6 정도의 약산성 부근에서 높은 분해효율을 나타내는 것으로 조사되었다. 최적 pH에서는 과산화수소의 주입량이 증가할수록 두 물질 모두 제거효율이 증가하는 것으로 조사되었으나 과산화수소의 주입량이 200 mg/L 이상을 초과하는 경우에는 과산화수소에 의한 OH radical trap에 의하여 제거효율이 감소하는 것으로 조사되었다. 이상의 결과 $UV/H_2O_2$ 광분해에 의한 Oxalic acid와 Citric acid의 처리시 pH 4에서 과산화수소 주입량 200 mg/L일 경우 가장 효율적인 것으로 조사되었다.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.91-96
• /
• 2016

Oxidation behaviours of ash free coal (AFC), carbon, and H₂ fuels were investigated with a coin type molten carbonate fuel cell. Because AFC has no electrical conductivity, its oxidation occurs via gasification to H₂ and CO. An interesting behaviour of mass transfer resistance reduction at higher current density was observed. Since the anode reaction has the positive reaction order of H₂, CO₂ and H₂O, the lack of CO₂ and H₂O from AFC results in a significant mass transfer resistance. However, the anode products of CO₂ and H₂O at higher current densities raise their partial pressure and mitigate the resistance. The addition of CO₂ to AFC reduced the resistance sufficiently, thus the resistance reduction at higher current densities did not appear. Electrochemical impedance results also indicate that the addition of CO₂ reduces mass transfer resistance. Carbon and H₂ fuels without CO₂ and H₂O also show similar behaviour to AFC: mass transfer resistance is diminished by raising current density and adding CO₂.

• 한국물환경학회지
• /
• 제30권6호
• /
• pp.653-657
• /
• 2014

Effects of $H_2O_2$ addition for fenton oxidation on iron coagulation for treatment of phosphorus species, such as orthophosphate, metaphosphate, pyrophosphate, organic phosphate, were investigated. The effects of coagulant dosage, hydrogen peroxide dosage and the combined sequence ferric coagulation and $H_2O_2$ addition for fenton oxidation and coagulation were studied. The characteristics of floc growth rate were monitored using the PDA. The removal efficiencies of phosphorus species by iron coagulation were increased as Fe/P molar ratio increased. However, the removal efficiencies of metaphosphate, pyrophosphate, organic phosphate by a ferric coagulation were not increased as Fe/P molar ratio increased. The removal efficiency of metaphosphate, pyrophosphate, organic phosphate was increased by using iron coagulation and $H_2O_2$ addition for fenton oxidation. The result indicated that non-reactive phosphorus after iron coagulation was changed to reactive phosphorus by $H_2O_2$ addition for fenton oxidation and the oxidized iron enhanced the coagulation efficiencies.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.466-475
• /
• 2022

Surface oxides and intergranular (IG) oxidation phenomena in Alloy 600 depending on hydrogen concentration were characterized to obtain clear insight into the primary water stress corrosion cracking (PWSCC) behavior upon exposure to pressurized water reactor primary water. When hydrogen concentration was between 5 and 30 cm³ H₂/kg H₂O, NiFe₂O₄ and NiO type oxides were found on the surface. NiO type oxides were found inside the oxidized grain boundary when hydrogen concentration was 5 cm³ H₂/kg H₂O. However, only NiFe₂O₄ spinel on the surface and Ni enrichment were observed when hydrogen concentration was 30 cm³ H₂/kg H₂O. These results indicate that the oxidation/reduction reaction of Ni in Alloy 600 depending on hydrogen concentration can considerably affect surface oxidation behavior. It appears that the formation of NiO type oxides in a Ni oxidation state and Ni enrichment in a Ni reduction (or metallic) state are common in primary water. It is believed that the above different oxidation/reduction reactions of Ni in Alloy 600 depending on hydrogen concentration can also significantly affect the resistance to PWSCC of Alloy 600.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.115-118
• /
• 1999

Carbon composites with $MoSi_2$ dispersion were prepared by hot-pressing at $1700^{\circ}C$ under 30 MPa for 1 h using polysilazance as binding material. The composites consisted of C, $Mo_{4.8}Si_3C_{0.6}$ and SiC. Bulk density and porosity of the carbon composites with 10 vol% $MoSi_2$ was 1.8g.$\textrm{cm}^{-3}$ and 34%, respectively. This composite was oxidized about 0.05mm from the surface of the carbon composite after oxidation test at $1500^{\circ}C$ for 10h in air. Formation of the $SiO_2$ glass layer was observed by SEM. When this composite suffered damage in the coating layer, it had hardly farther oxidation because of its self-repairing property. The composite prepared in this study indicated good oxidation resistance.