• KSBB Journal
• /
• 제5권4호
• /
• pp.355-363
• /
• 1990

서울 인근의 생활하수에서 메탄올을 이용하는 박테리아를 분리하였다. 이의 최적 성장을 위한 온도 및 pH는 각각 $33^{\circ}C$ 및 7.1이었다. 최대비성장율은 $0.42hr^{-1}$을 나타내었다. 최소 배지조성은 기본배지의 양을 안정상테에서 연속발효법으로 구하였으며, 그 조성은 다음과 같다(g / l); Methanol 40, $(NH_4)_2\;SO_42,\;KH_2PO_4\;1.5,\;K_2HPO_4\;0.2,\;H_3PO_4\;0.79,\;Na_2HPO_4{\cdot}12H_2O\;0.15,\;MgSO_4{\cdot}7H_2O\;1.5,\;FeSO_4{\cdot}7H_2O\;0.034,\;MnSO_4{\cdot}4H_2O\;0.005,\;CuSO_4{\cdot}5H_2O\;0.0027,\;CaCl_2{\cdot}2H_2O\;0.25,\;ZnSO_4{\cdot}7H_2O\;0.007,\;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048,\;H_3BO_3\;0.00068,\;CoCl_2\; 0.00024$ 최적 배지 조건에서 구한 최대 세포생산성은 3.8g / l / hr였으며, 이때의 회석율은 $0.23hr^{-1}$이었다. 최대 세포농도와 그대의 단백질의 함량은 각각 19.5g / l 및 70%였으며, 이때의 회석율은 $0.1hr^{-1}$이었다.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.208-215
• /
• 2005

골재를 제조할 때 골재의 중앙에 만들어지는 블랙코어(black core)의 형성 메커니즘을 살펴보기 위해 적점토, 탄소(carbon), 산화철$(Fe_2O_3)$이 혼합된 직경 10mm 구형골재의 조성, 소성온도, 소성시간, 소성분위기, 소성방법을 변화시키면서 각각의 비중, 흡수율, 블랙코어 면적비$(\%)$, 파괴강도, Fe 총량분석, XRF를 측정하고 비교하였다. 소량의 산화철 첨가는 골재의 물성에 큰 영향을 미치지 않는 반면 탄소는 많이 첨가될수록, 소성온도가 증가할수록 블랙코어가 더 많이 형성되었고, 블랙코어의 비율이 증가하면 그만큼 비중은 감소하고 흡수율은 증가하였다 산화분위기에서 소성시킨 골재는 껍질 (shell)과 블랙코어가 뚜렷하게 구분되는 반면 환원분위기에서 소성한 시편에서는 시편의 단면전체에 블랙코어가 형성되었고, 산화분위기와 중성분위기와는 달리 환원분위기에서 소성된 시편에서는 탄소첨가량이 증가할수록 비중이 증가했으며, 전반적인 비중은 가장 낮았다. 흡수율은 모든 분위기에서 탄소 첨가량이 증가할수록 증가했다. 소성방법을 달리하여 실험한 결과 직화소성한 시편에서는 블랙코어가 잘 형성되었고, 승온소성한 시편에 비해 비중은 작고 흡수율은 높았다. 또한 파괴강도의 측정결과를 통해 블랙코어가 형성되지 않은 골재시편의 강도가 블랙코어가 형성된 시편보다 다소 크다는 사실을 알 수 있었다. Fe총량분석결과 블랙코어에서 껍질보다 많은 Fe와 FeO가 분포하였고, 껍질에는 적색을 띠는 $Fe_2O_3$가 많이 분포되어 있었다. XRF 분석 결과를 통해 탄소는 블랙코어 형성부위에서만 존재한다는 것을 알 수 있었다.사 결과 외형은 YF04 $1.0\%$ 처리구가 3.64으로 높게 나타났으며 YM03 $0.1\%$ 처리구가 3.00으로 가장 낮았다(P>0.05). 색은 YF04 $1.0\%$ 처리구가 4.00으로 높았으며 YF04 $0.1\%$ 처리구는 2.93으로 가장 낮았다(P<0.05). 다즙성은 YF04 $1.0\%$ 처리구가 3.50으로 가장 높게 나타났으며 YM03 $0.1\%$와 YM03 $1.0\%$ 처리구가 각각 3.07로 낮았다 (P>0.05).구보다 약간 증가하였으나 큰 차이를 나타내지 않았다.다리살의 콜레스테롤 함량도 감소하는 경향을 보였으나 유의적인 차이는 없었다.적으로 작용하였다.있다.>16$\%$>0$\%$ 순으로 좋게 평가되었다. 결론적으로 감농축액의 첨가는 당과 탄닌성분을 함유함으로써 인절미의 노화를 지연시키고 저장성을 높이는데 효과가 있는 것으로 생각된다. 또한 인절미를 제조할 때 찹쌀가루에 8$\%$의 감농축액을 첨가하는 것이 감인절미의 색, 향, 단맛, 씹힘성이 적당하고 쓴맛과 떫은맛은 약하게 느끼면서 촉촉한 정도와 부드러운 정도는 강하게 느낄수 있어서 전반적인 기호도에서 가장 적절한 방법으로 사료된다.비위생 점수가 유의적으로 높은 점수를 나타내었다. 조리종사자의 위생지식 점수와 위생관리 수행수준의 상관관계를 조사한 결과, 위생지식의 기기설비위생은 위생관리 수행수준의 합계(p<0.01)에서 유의적인 상관관계(p<0.01)를 나타내었으며, 위생지식의 식중독 및 미생물은

• 한국환경농학회지
• /
• 제19권5호
• /
• pp.401-418
• /
• 2000

1. Production of the artificial zeolite from coal ash Coal fly ash is mainly composed of several oxides including $SiO_2$ and $Al_2O_3$ derived from inorganic compounds remained after burning. As minor components, $Fe_2O_3$ and oxides of Mg, Ca, P, Ti (trace) are also contained in the ash. These components are presented as glass form resulting from fusion in the process of the combustion of coal. In other word, coal ash may refer to a kind of aluminosilicate glass that is known to easily change to zeolite-like materials by hydrothermal reaction. Lots of hot seawater is disposing near thermal power plants after cooling turbine generator periodically. Using seawater in the hydrothermal reaction caused to produce low price artificial zeolite by reduction of sodium hydroxide consumption, heating energy and water cost. As coal ash were reacted hydrothermally, peaks of quartz and mullite in the ash were weakened and disappeared, and new Na-Pl peaks were appeared strengthily. Si-O-Si bonding of the bituminous coal ash was changed to Si-O-Al (and $Fe^{3+}$) bonding by the reaction. Therefore the produced Na-Pl type zeolite had high CEC of 276.7 $cmol^+{\cdot}kg^{-1}$ and well developed molecular sieve structure with low concentration of heavy metals. 2. Utilization of the artificial zeolite in agro-environment The artificial zeolite(1g) could remove 123.5 mg of zinc, 164.7 mg copper, 184.4 mg cadmium and 350.6 mg lead in the synthetic wastewater. The removability is higher 2.8 times in zinc, 3.3 times in copper, 4.7 times in cadmium and 4.8 times in lead than natural zeolite and charcoal powder. When the heavy metals were treated at the ratio of 150 $kg{\cdot}ha^{-1}$ to the rice plant, various growth inhibition were observed; brownish discoloration and death of leaf sheath, growth inhibition in culm length, number of panicles and grains, grain ripening and rice yield. But these growth inhibition was greatly alleviated by the application of artificial zeolite, therefore, rice yield increased $1.1{\sim}3.2$ times according to the metal kind. In addition, the concentration of heavy metals in the brown rice also lowered by $27{\sim}75%$. Artificial Granular Zeolites (AGZ) was developed for the purification of wastewater. Canon exchange capacity was 126.8 $cmol^+{\cdot}kg^{-1}$. AGZ had Na-Pl peaks mainly with some minor $C_3S$ peaks in X-ray diffractogram. In addition, AGZs had various pore structure that may be adhere the suspended solid and offer microbiological niche to decompose organic pollutants. AGZ could remove ammonium, orthophosphate and heavy metals simultaneously. Mixing ratio of artificial zeolite in AGZs was related positively with removal efficiency of $NH_4\;^+$ and negatively with that of $PO_4\;^{3-}$. Root growth of rice seedling was inhibited severely in the mine wastewater because of strong acidity and high concentration of heavy metals. As AGZ(1 kg) stayed in the wastewater(100L) for 4days, water quality turned into safely for agricultural usage and rice seedlings grew normally.

• 자원리싸이클링
• /
• 제31권4호
• /
• pp.40-48
• /
• 2022

폐LiFePO₄ 배터리의 양극재에는 리튬이 약 4% 함유되어 있으며, 함유된 원소의 재활용은 환경적인 문제뿐만 아니라 자원순환의 관점에서 중요하다. 폐LiFePO₄ 양극재 분말에 함유된 리튬을 선택적으로 침출하기 위하여 3종류의 과황산계 산화제 [과황산나트륨(Na₂S₂O₈), 과황산칼륨(K₂S₂O₈), 그리고 과황산암모늄((NH₄)₂S₂O₈)]를 사용하여 각 성분의 침출율 및 분말특성을 비교 분석하였다. 침출 시 광액농도를 변수로 두고 각 조건별로 3시간 동안 침출을 진행하였으며, 얻어진 침출용액은 ICP 성분분석을 시행하여 침출율을 계산하였다. 본 연구에서 사용된 모든 과황산계 산화제 종류에서 92% 이상의 리튬 침출율을 보였다. 특히 과황산암모늄의 산화제를 사용하여 침출하였을 경우, 50 g/L의 광액농도 및 1.1 몰 비의 산화제 농도에서 약 93.3%의 가장 높은 리튬의 침출율을 보였다.

• 지질공학
• /
• 제24권4호
• /
• pp.583-595
• /
• 2014

본 연구에서는 1930년대 평양 대동강 유역의 남측(탄산염지역)과 북측(비탄산염지역)의 지하수와 지표수의 수질(pH, CaO, Fe, $HCO{_3}^-$, $SO{_4}^{2-}$)을 비교 하였다. 그 결과 남측이 북측에 비해 pH 와 $SO{_4}^{2-}$ 의 농도는 높았고 $HCO{_3}^-$와 Fe의 농도는 낮게 나타났다. 이는 점토층 유기물의 산화에 의해 발생한 수소가 무기염류의 금속이온을 치환하여 산을 형성하는 반응에 그 원인이 있는 것으로 판단된다.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.3-8
• /
• 2002

고탄소페로망간을 중저탄소페로망간으로 제조하는 AOD공정에서 발생되는 분진은 약 90%가 $Mn_3$$O_4$이므로, 이를 이용하여 soft ferrite의 원료인 고순도 $Mn_3$$O_4$분말을 제조하기 위해서는 침출한 액의 Mn을 더욱 정제하여야 한다. 분진을 활성탄으로 배소하여 MnO로 환원시키고, 상온의 4N 염산수용액에 180g/L의 환원된 분진을 첨가하면 용액의 pH가 5이상이 되고 Fe와 Si가 침전으로 제거된 약 10%의 망간침출액이 얻어진다. Mn의 농도가 약 15000 ppm이 되도록 희석한 $70^{\circ}C$의 침출액에 F의 농도가 3000ppm이 되도록 $NH_4$F를 첨가하면 Ca가 침전하여 약14 ppm이하로 제거된다. Ca를 침전시킨 상징액에(NH$ 1.5M_4$)$_2$$CO_3$수용액을 2L/min으로 Mn의 당량만큼 첨가하면 미립의 고순도 $MnCO_3$가 침전한다. 침전을 여과하고 건조한 후에 $1000^{\circ}C$에서 2 시간 소성하면 median size가 $8.2mu$m인$ Mn_3$O$_4$를 얻을 수 있다. 제조된 산물은 99%이상의 순도로 soft ferrite용 Mn$O_3$$_4$분말의 규격을 만족한다.

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.233-236
• /
• 2012

In this study, PEDOT thin films polymerized with Iron(III)tosylate ($Fe(PTS)_3$) and grown on acetic acid-catalyzed 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM) surfaces by VPP method have been investigated. PEDOT thin films were synthesized on APS self-assembled $SiO_2$ wafer surface at two different concentrations (20 wt% and 40 wt%) and growth time (3 and 30 minutes), and then they were compared. PEDOT vapour phase-polymerized with 40 wt% $Fe(PTS)_3$ oxidant completely formed a thin film on acetic acid-catalyzed APS-SAM surface while with 20 wt% $Fe(PTS)_3$ did not at all. It means that the oxidant can be uniformly coated on acetic acid-catalyzed APS-SAM surface at the 40 wt% concentration, which gives rise to the uniform growth of PEDOT thin film on it.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.301-306
• /
• 2010

The chemical formula of magnetite ($Fe_3O_4$) is $FeO{\cdot}Fe_2O_3$, t magnetite being composed of divalent ferrous ion and trivalent ferric ion. In this study, the influence of the coexistence of ferrous and ferric ion on the formation of iron oxide was investigated. The effect of the co-precipitation parameters (equivalent ratio and reaction temperature) on the formation of iron oxide was investigated using ferric sulfate, ferrous sulfate and ammonia. The equivalent ratio was varied from 0.1 to 3.0 and the reaction temperature was varied from 25 to 75. The concentration of the three starting solutions was 0.01mole. Jarosite was formed when equivalent ratios were 0.1-0.25 and jarosite, goethite, magnetite were formed when equivalent ratios were 0.25-0.6. Single-phase magnetite was formed when the equivalent ratio was above 0.65. The crystallite size and median particle size of the magnetite decreased when the equivalent ratio was increased from 0.65 to 3.0. However, the crystallite size and median particle size of the magnetite increased when the reaction temperature was increased from $25^{\circ}C$ to $75^{\circ}C$. When ferric and ferrous sulfates were used together, the synthetic conditions to get single phase magnetite became simpler than when ferrous sulfate was used alone because of the co-existence of $Fe^{2+}$ and $Fe^{3+}$ in the solution.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.26-35
• /
• 2013

Outbreak of animal infectious diseases such as foot-and-mouth disease, avian influenza are becoming prevalent worldwide. For prevent the further infection, tremendous numbers of the infected or culled stocks are buried around farm. This burial method can generate a wide range of detrimental components such as leachate, nutrient, salt, and pathogenic bacteria, consequently. In this study, for the stabilization of livestock carcasses leachate, advanced oxidation processes utilizing the Fenton reaction was investigated in lab-scale experiments for the treatment for $COD_{Cr}$ of livestock carcass leachate. $COD_{Cr}$ reduction by the Fenton oxidation was investigated response surface methodology using the Box-Begnken methods were applied to the experimental results. A central composite design was used to investigate the effects of the independent variables of pH ($x_1$), dosage of $FeCl_2{\cdot}4H_2O$ ($x_2$) and dosage of $H_2O_2$ ($x_3$) on the dependent variables $COD_{Cr}$ concentration ($y_1$). A 1 M NaOH and $H_2SO_4$ was using for pH control, $FeCl_2{\cdot}4H_2O$ was used as iron catalyst and NaOH was used for Fenton reaction. The optimal conditions for Fenton oxidation process were determined: pH, dosage of $FeCl_2{\cdot}4H_2O$ and dosage of $H_2O_2$ were 3, 0.6 g (0.0151 M) and 7 mL(0.259 M), respectively. Statistical results showed the order of significance of the independent variables to be pH > initial concentration of ferrous ion > initial concentration of hydrogen peroxide.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.653-662
• /
• 2010

This study investigates the effect of particle size on the detergency of particulate soil using an $\alpha-Fe_2O_3$ particle as the model. Monodispersed spherical $\alpha-Fe_2O_3$ particles were prepared by the hydrothermal aging of an acidic $FeCl_3$ and HCl solution. The $\xi$-potential of PET fiber was measured by the streaming potential method. The potential energy of interaction between the particle and fiber was calculated using the heterocoagulation theory for a sphere-plate model. The $\xi$-potential of PET fiber and potential energy of interaction between particles and fiber increased with a decreasing particle size in a DBS solution. However, in the nonionic surfactant solution, the $\xi$-potential signs of PET fiber and $\alpha-Fe_2O_3$ particles were (-) and (+), respectively; there was no repulsive power between the particles and substrate. The adhesion of particles to the fabric increased with increasing particle size in the anionic surfactant solution and their removal from the fabric increased with a decreasing particle size. The adhesion of particles to the fabric and their removal from the fabric was biphasic with a maximum and minimum at 0.1% concentration of the surfactant solution. In the nonionic surfactant solution the adhesion of particles to fabric and their removal from the fabric were greater than the ones in the anionic surfactant DBS solution.