• 한국환경과학회지
• /
• 제6권5호
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.187-190
• /
• 2012

고분자전해질연료전지(PEMFC)에서 음극 공기에 의한 이온오염은 막전극 합체(MEA)의 성능을 심각하게 열화시킨다. 본 연구에서는 산업단지, 길가, 해변의 공기 중 이온 농도를 측정하였다. 이들 지역에서 $Na^+$, $K^+$, $Ca^{2+}$와 $Fe^{3+}$ 이온 농도가 비교적 높았다. 가습수로부터 이들 이온이 cathode에 유입되어 MEA 성능에 미치는 영향에 대해 연구하였다. 수돗물을 가습수로 사용해 170시간 운전한 후 MEA 성능이 초기의 11%로 감소하였다. 이들 오염 이온들이 수소이온보다 전해질 막의 슬폰산기와 친화력이 더 강해 전해질 막에 쉽게 이온 교환된 결과다. MEA 중에서 전극/막 계면에서 이온 오염이 MEA 성능저하에 미치는 영향이 제일 컸다.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.53-58
• /
• 2018

염산농도가 낮은 용액에서 TBP/MIBK와 다른 중성추출제(Cyanex 923, TOPO, TOP)의 혼합용매에 의한 리튬(I)의 용매추출실험을 수행했다. 0.1 M의 $FeCl_3$가 추출된 TBP/MIBK는 염산농도를 1에서 9 M로 변화시켜 준비하였다. 약한 염산용액에서 리튬(I)의 추출은 유기상에서 $FeCl_3$의 안정도와 관계된다. $FeCl_3$가 추출된 TBP를 진한 염산용액에서 제조하는 경우, 추출시 철의 탈거율이 작아 리튬(I)이 수소이온과의 교환반응에 의해 추출되었다. 혼합용매에서 TBP의 농도도 $FeCl_3$의 안정에 영향을 미쳤다. TBP에 비해 $FeCl_3$는 MIBK로부터 쉽게 탈거되어 리튬(I)을 추출하지 못했다. TBP/MIBK와 혼합용매로 첨가된 중성추출제의 종류는 리튬(I)의 추출과 철의 탈거에 영향을 미치지 않았다.

• 한국대기환경학회지
• /
• 제4권2호
• /
• pp.57-66
• /
• 1988

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul and suspended particulate was collected by Andersen air sampler during this period. The samples were analyzed for 16 components $(SO_n^{2-}, NO_3^-, Cl^-, PO_4^{3-}, NH_4^+, F^-, Al, Fe, K, Cu, Mn, Na, Pb, Mg, Ca, Cd)$. The conclusions are as follwes: 1. Total suspended particulate concentation during the period of sandy dust phenomena was 489 $\mug/m^3$ (ordinary times: 140-125 $mug/m^3$) 2. The water - soluble ion component concentration of suspended particulate during the period of sandy dust phenomena was few and the metal concentration of that was more than that of ordinary times. 3. The cumulative frequency distribution of suspended particulates in logarithmic diagram did not show similar to normal log distribution during the period of sandy dust phenomena. 4. $SO_4^{2-}, NO_3^-, Cl^-, and PO_4^{3-}$ was onsided to coarse particle, and $NH_4^+$ and F to fine particle in the size distribution of water - soluble ion components during the period of sandy dust phenomena. 5. Metal concentration was high and Al, Fe, Cu, Mn, Na, Mg, and Ca was onsided to coarse particle, and K, Pb, and Cd to fine particle in the size distribution of metal components. 6. During the period of sandy dust phenomena the quantity of respirable particle (< 1 $\mum$) was about 3 times and that of metal components were about 2 - 11 times than that of ordinary times. 7. The concentrations of $NO_3^-, Cl^-, NH_4^+$ at ordinary times were 1.1 - 4 time than that of the period of sandy dust phenomena.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.321-328
• /
• 2019

A new miniaturized all solid-state contact Fe (III)-selective PVC membrane electrode based on Fe (II) phthalocyanine as a neutral carrier was described. The effects of the membrane composition and foreign ions on the electrode performance was investigated. The best performance was obtained with a membrane containing 32% poly (vinyl chloride), 64% dioctylsebacate, 3% Fe (II) phthalocyanine, and 1% potassium tetrakis (p-chlorophenyl) borate. The electrode showed near Nernstian response of $26.04{\pm}0.95mV/decade$ over the wide linear concentration range $1.0{\times}10^{-6}$ to $1.0{\times}10^{-1}M$, and a very low limit of detection $1.8{\pm}0.5{\times}10^{-7}M$. The potentiometric response of the developed electrode was independent at pH 3.5-5.7. The lifetime of the electrode was approximately 3 months and the response time was very short (< 7 s). It exhibited excellent selectivity towards Fe (III) over various cations. The miniaturized all solid-state contact Fe (III)-selective membrane electrode was successfully applied as an indicator electrode for the potentiometric titration of $1.0{\times}10^{-3}M$ Fe (III) ions with a $1.0{\times}10^{-2}M$ EDTA and the direct determination of Fe (III) ions in real water samples.

• 센서학회지
• /
• 제23권1호
• /
• pp.58-65
• /
• 2014

We developed a low-cost automatic diagnosis system for water quality in cooling towers to measure the concentrations of key ingredients such as $Ca^{2+}$, $Cl^-$, $PO{_4}^{3-}$, and $Fe^{2+}$. $Ca^{2+}$, and $Cl^-$ are the main factors that cause the generation of scale, corrosion, and sludge in water pipes. $PO{_4}^{3-}$ prevents corrosion, sludge and scale by inhibiting the ions (i.e., $Ca^{2+}$, $Cl^-$) from sticking to the pipes. $Fe^{2+}$ is an indicator of pipe corrosion. The proposed system consists of a microprocessor, a specimen container and heater, a precision pump, relays and valves, LED optical sources, and photo detectors. It automatically collects water samples and carries out pretreatment for determining the concentration of each chemical, and then estimates the concentration of each ion using low-cost LED optical sources and detectors. Experimental results showed that the accuracy of the proposed system is sufficiently high for water quality diagnosis and management of cooling towers, demonstrating the possibility of the proposed system's wide usage in real environments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.142-142
• /
• 2009

Bismuth-substituted yttrium iron garnet(Bi-YIG; $Bi_xY_{3-x}Fe_5O_{12}$, x=0, 0.5, 1.0, 1.5, 2.0) thin films were fabricated on glass substrates using a metal organic decomposition (MOD) method. The dielectric property was measured by NSMM(Near-field scanning microwave microscopy) system that operating frequency is 4 Ghz. The obtained reflection coefficient $S_{11}$ of the Bi:YIG thin films with different bismuth concentration was increased as the bismuth concentration increased due to the lattice mismatch and vacancy of ions because of a lager ionic radius of bismuth ion than yttrium ion.

• 자원리싸이클링
• /
• 제9권1호
• /
• pp.70-75
• /
• 2000

산화제 제조시 초기 과정에서 $Fe_3O_4$ 가 피복되었고 2 단계에서는 $Fe_3O_4$ 보다 첨착능이 우수한 것으로 알려져 있는 $Fe_3O_4$가 생성되었다. 산화제 폐염삼 30g/l에 5Cu mg/l를 첨가하여 20분간 반응하였을 경우 구리이온 제거효율은 74.8%이었다. 연속실험에서 최종 배출수중의 구리농도가 1mg/l이하를 파괴점으로 보았을 때 파괴점 도달시간은 23시간이었고 흡착용량은 0.87$\cdot$Cu/g$\cdot$IOCS이었다.

• 대한화학회지
• /
• 제44권5호
• /
• pp.422-428
• /
• 2000

흐름 주입 누석법에 의한 알루미늄 이온의 최적 부석 조건을 확립하였다. Eriochrome Cyanine R(ECR) 염료는 pH 6.0에서 알루미늄과 반응하여 535nm에서 최대 흡광도를 갖는 착화합물을 형성한다. 이 반응을 흐름 주입 분석법으로 도입하기 위해 혼합 및 반응 코일이 길이, 아세트산 완충용액의 놀도 및 pH, 온도, 시료 주입 부피를 포함한 반응 조건을 최적화 하였다. 그 결과 혼합 및 반응코일의 길이는 각각 0.5 m와 4 m,아세트산 완충용액의 pH와 농도는 각각 0.6 및 1M,ECR의 농도는 0.56 mM, 반응온도는 40$^{\circ}C$,시료 주입량은 300 ${\mu}L$,최대흡수 파장은 535nm 이었다. 이런한 조건하에서 알루미늄 이론의 검출한계는 0.05mg/L 이하이었고, 반복성은 1%이하로 우수하였다. 시료 측정 주기는 시간당 24회 주입이 가능하였다. 또한 $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$ 이온 및 그타 음이온류의 공존시 방해 현상을 알아본 결과 1,000 mg/L까지는 방해를 일으키지 않았고 $SO_4^{2-}$ 이온은 2,000 mg/L까지도 거의 방해를 일으키지 않았다. 또한 이 방법을 이용하여 전주 및 고창 지역의 상수 및 지하수 중 알루미늄의 농도를 분석한 결과 전주 지역 상수 중에는 평균 0.478 mg/L, 고차지역 상수 중에는 0.278 mg/L로서 전주 지역이 높게 나타났고, 지하수는 전주지역이 0.386 mg/L로서 전주지역이 더 낮게 나타났다.

• 환경위생공학
• /
• 제19권4호
• /
• pp.9-18
• /
• 2004

In this study, the observation data for the yellow sandy dust phenomena from the year 1999 to 2003 at background sites in Korea were collected at Global Atmospheric Observatory at An-Myeon island and its temporal variation were analyzed. The chemical characteristics of the fine particles were also analyzed in order to evaluate sources of the yellow sandy dust particles. The results showed that the monthly average mass concentration of the fine particles was the highest in springtime and the lowest in summertime in general. The magnitude of its variation was also the highest in March in which the occurrence of yellow sandy dust was the most frequent and thus the number of samples was the largest, while the lowest in June through September. The yearly variation of ion components contributions to the total mass concentration of the fine particles was slowly decreasing, showing that $63\%$ in 1999, $59\%$ in 2000 and $56\%$ in 2003. The most prevalent ion components in the fine particles were found to be $NO_3$ and $SO_4^{2-}$, which are known to be source materials of acidic precipitation, and $NH_4^+$, a neutralizing material of the acid precipitation. Relative proportion of metal components in the fine particles was calculated as $14\%$ in average, and their concentrations are in an order of Fe > Al > Na > Ca > Zn > Pb > Cu > Mn > Ni > Cd > Cr > Co > U. The results indicated that main sources of the metals was soil-originated Fe, Al, Ca, and Mg, and the contribution of anthropogenic air Pollution-originated Zn, Pb, Cu, Mn were also high and keep slightly increasing. Statistical analysis showed that the chemical components could be divided into soil-originated group of Mg, Al, Ca, Fe, and Mn and air pollution-originated group of $NO_3$, Zn, Pb, and they are occupying more than $60\%$of all the components in the dusty sand. The results explain that An-Myeon island is more influenced by soil-originated source than ocean-originated one and also the influencing strength of anthropogenic poilution-originated source is less than $50\%$ of that of soil-originated sources. Compared to non-yellow sandy period, the yellow sandy dust period showed that the amounts of soil-originated $Mg^{2+}$ and $Ca^{2+}$ and ocean-originated $Na^+$ and $Cl^-$ were increased to more than double and the metals of Mg, Al, Ca, Fe were also highly increased, while micro metal components such as Pb, Cd, Zn, which have a tendency of concentrating in air, were either decreased or maintained at nearly constant level. In the period of yellow sandy dust, a strong positive correlation was observed between water soluble ions and between metals in terms of its concentration, respectively. Factor analysis showed that the first group being comprised of about $43\%$ of the total inorganic components was affected by soil and they are ions of $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ and metals of Na, Fe, Mn and Ni. The result also showed that the metals of Mg and Cr were classified as second group and they were also highly affected by soil sources.