• 방사선산업학회지
• /
• 제4권4호
• /
• pp.353-357
• /
• 2010

Silver nanoparticles (AgNPs) can be used in the areas such as integrate circuit, cell electrode and antimicrobial deodorant. In this study, AgNPs have been prepared by using $AgNO_3$ aqueous solution in the carboxymethyl cellulose (CMC) hydrogel. CMC powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make CMC hydrogel. CMC hydrogels were dipped into $1.0{\times}10^{-2}M$ $AgNO_3$ solution for 1 hour. After that, the swollen hydrogels were irradiated by gamma-ray for the formation of AgNPs. The characteristics of silver nanoparticles in the CMC hydrogels were monitored by UV-Vis and the morphological study and dispersed coefficient of particles were investigated by FE-SEM/EDX. It was observed that the sodium salt in the CMC is crucial to the formation of silver nanoparticle. Finally, antibacterial tests indiacted that the hydrogel containing silver nanoparticle has antibacterial activity.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.298-302
• /
• 2012

Fe/$SiO_2$ core-shell type composite nanoparticles have been synthesized using a reverse micelle process combined with metal alkoxide hydrolysis and condensation. Nano-sized $SiO_2$ composite particles with a core-shell structure were prepared by arrested precipitation of Fe clusters in reverse micelles, followed by hydrolysis and condensation of organometallic precursors in micro-emulsion matrices. Microstructural and chemical analyses of Fe/$SiO_2$ core-shell type composite nanoparticles were carried out by TEM and EDS. The size of the particles and the thickness of the coating could be controlled by manipulating the relative rates of the hydrolysis and condensation reaction of TEOS within the micro-emulsion. The water/surfactant molar ratio influenced the Fe particle distribution of the core-shell composite particles, and the distribution of Fe particles was broadened as R increased. The particle size of Fe increased linearly with increasing $FeNO_3$ solution concentration. The average size of the cluster was found to depend on the micelle size, the nature of the solvent, and the concentration of the reagent. The average size of synthesized Fe/$SiO_2$ core-shell type composite nanoparticles was in a range of 10-30 nm and Fe particles were 1.5-7 nm in size. The effects of synthesis parameters, such as the molar ratio of water to TEOS and the molar ratio of water to surfactant, are discussed.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3077-3083
• /
• 2010

The electrochemical detection of As(III) was investigated on a platinum-iron(III) nanoparticles modified multiwalled carbon nanotube on glassy carbon electrode(nanoPt-Fe(III)/MWCNT/GCE) in 0.1 M $H_2SO_4$. The nanoPt-Fe(III)/MWCNT/GCE was prepared via continuous potential cycling in the range from -0.8 to 0.7 V (vs. Ag/AgCl), in 0.1 M KCl solution containing 0.9 mM $K_2PtCl_6$ and 0.6 mM $FeCl_3$. The Pt nanoparticles and iron oxide were co-electrodeposited into the MWCNT-Nafion composite film on GCE. The resulting electrode was examined by cyclic voltammetry (CV), scanning electron microscopy (SEM), and anodic stripping voltammetry (ASV). For the detection of As(III), the nanoPt-Fe(III)/MWCNT/GCE showed low detection limit of 10 nM (0.75 ppb) and high sensitivity of $4.76\;{\mu}A{\mu}M^{-1}$, while the World Health Organization's guideline value of arsenic for drinking water is 10 ppb. It is worth to note that the electrode presents no interference from copper ion, which is the most serious interfering species in arsenic detection.

• Bulletin of the Korean Chemical Society
• /
• 제17권12호
• /
• pp.1127-1131
• /
• 1996

[FeⅡ2(N-Et-HPTB)Cl2]BPh4(1), where N-Et-HPTB is the anion of N,N,N',N'-tetrakis(N-ethyl-2-benzimidazolylmethyl)-2-hydroxy-l,3-diaminopropane, has been synthesized to model dioxygen binding to the diferrous centers of proteins. 1 has a singly bridged structure with a μ-alkoxo of N-Et-HPTB and contains two five-coordinate iron(Ⅱ) centers with two chloride ligands as exogenous ligands. 1 exhibits an electronic spectrum with a λmax at 336 nm in acetone. 1 in acetone exhibits no EPR signal at 4 K, indicating diiron(Ⅱ) centers are antiferromagnetically coupled. Exposure of acetone solution of 1 to O2 at -90 ℃ affords an intense blue color intermediate showing a broad band at 586 nm. This absorption maximum of the dioxygen adduct(1/O2) was found in the same region of μ-l,2-peroxo diiron(Ⅲ) intermediates in the related complexes with pendant pyridine or benzimidazole ligand systems. However, this blue intermediate exhibits EPR signals at g = 1.93, 1.76, and 1.59 at 4 K. These g values are characteristic of S = 1/2 system derived from an antiferromagnetically coupled high-spin Fe(Ⅱ)Fe(Ⅲ) units. 1 is the unique example of a (μ-alkoxo)diferrous complex which can bind dioxygen and form a metastable mixed-valence intermediate. At ambient temperature, most of 1/O2 intermediate decays to form a diamagnetic species. It suggests that the dacay reaction of the intermediate might be bimolecular, implying the formation of mixed-valence tetranuclear species in transition state.

• 공업화학
• /
• 제26권6호
• /
• pp.681-685
• /
• 2015

본 연구에서는 열 변색 물질로 알려진 순수한 $BiVO_4$ 분말과 금속이 도핑된 $M-BiVO_4$ (M = Mg, Cu) 분말들을 bismuth nitrate ($Bi(NO_3)_3$)와 ammonium vanadate ($NH_4VO_3$)의 혼합 수용액으로부터 고압반응기에서 수열 합성법을 통하여 성공적으로 제조하였다. 시료들의 결정구조, 미세구조 및 열 변색 특성들은 FE-SEM, FT-IR, XRD, DSC, UV-Vis-NIR 분광기 및 colorimeter를 이용하여 분석하였다. 시료를 상전이 온도 이상으로 가열시키면, 순수한 $BiVO_4$ 시료에 비하여 $M-BiVO_4$ (M = Mg, Cu) 시료의 색상이 상대적으로 선명하게 열 변색하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 정기총회 및 동계학술연구발표회
• /
• pp.72-73
• /
• 2009

First-principles calculations were carried out to investigate the effects of Al impurities on bcc Fe magnetism by considering SOC. No significant solid solution hardening effect was found. Albeit the effects of the SOC by Al on spin magnetic moments were minor, there are sizeable orbital magnetic effects. It is concluded that the orbital magnetism due to the Al impurity is strongly related with the impurity screening of the system as seen in Si impurity case [3], but the effects of Al impurity is stronger than those of Si impurity in terms of orbital magnetism.

• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1313-1318
• /
• 1999

Lewis bases were employed to control the stoichiometry of ferrite film prepared by light enhanced plating (LEP) technique. When 2,2'-bipyridyl was used as a Lewis base, conversion electron Mosbauer spectroscopy (CEMS) and x-ray powder diffraction (XRD) experiments showed that the main component of the ferrite films was metal-deficient magnetite (Fe3(1-δ)O4). Nonstoichiometry and roughness of LEP films were increased by the addition of 2,2'-bipyridyl. Using ethylenediaminetetraacetate (EDTA) as a Lewis base, produced film that was a mixture of magnetite and Υ-FeO(OH). No low temperature transition (Verwey transition) of magnetite was detected in resistivity and ac-susceptibility measurements for the LEP films. Surface morphology of the LEP films was observed by atomic force microscopy (AFM). The size of dominant particles was about 0.2 μm.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.245-256
• /
• 2004

The extraction of three kinds of amido podands, N,N,N'N'-tetrabutyl-3-oxa-pentanedi- amide (TBDGA), N,N,N'N'-tetra-isobutyl-3-oxa-pentanediamide(TiBDGA) and N,N,N'N'-tetra- butyl-3,6-dioxa-oct-anediam- ide(TBDOODA) on U(VI),Pu(IV), Am(III), Eu(III) and other metal ions is studied in nitric acid solutions. 40%octanol-kerosene is chosen as diluents to eliminate third phase and emulsion. TBDGA and TiBDGA show extraction selectivity to An(III) and Ln(III) much higher than to U(VI) and Pu(IV). Fe, Ru and Mo is poorly extracted by the three kinds of amid podands in 2~3mol/L $HNO_3$ solutions. Aiming to eliminate interface crude when using simulated HLLW solution in the system of 0.2mol/L TBDGA/Octanol＋kerosene, acetohydroxyamic acid was adapted. Distribution ratio of zirconium was decreased when adding acetohydroxyamic acid in aqueous solution, and interface crude disappeared as mixing extractant with HLLW. The counter-current extraction test is carried out in a set of miniature mixer-settler, with 0.2mol/L TBDGA/ 40% octanol-kerosene as extractant to separate U(VI), Pu(IV), Am(III) and Eu(III) from simulated high level liquid waste(HLLW) solution. In battery A, lanthanides and actinides are coextracted into organic phase with the recovery of 99.98% for U(Ⅵ), >99.99% for Pu(IV), and >99.99% for Am(III) and Eu(III) respectively. In battery R1, 99.99% U, 86.2% Pu and a part of Am or Eu are stripped into aqueous phase by 0.2mol/L acetohydroxyamic acid (AHA) in 0.01mol/L $HNO_3$ solution. In battery $R_2$, Am, Eu and remained Pu are completely back-extracted by 0.2mol/L AHA. This separation process contains no salt reagent, and it is not necessary to dilute HLLW feed.

• 한국토양비료학회지
• /
• 제36권4호
• /
• pp.225-232
• /
• 2003

노지에서 분무식 양액재배를 이용하여 감귤나무(Citrus unshiu Marc. cv. Miyagawa Wase)의 무기양분과 물 흡수 실험을 수행하였다. 양액의 농도는 세 수준으로 나누어 공급한 뒤 주기적으로 양액을 채취하여 무기양분과 물 흡수량을 측정하였고, 생체중의 변화를 조사하여 수체 증가량을 알아보았다. 물의 흡수는 감귤나무의 수체와 시간이 경과할수록 증가하였으나, High 처리구에서는 Medium과 Low보다 적게 흡수되었다. 영양생장(5~7월)과 과실형성(8~9월)기에 생체중과 양분흡수 증가가 가장 크게 일어났다. 양분의 흡수는 양액 공급 농도에 따라 차이가 컸으며, 높을수록 더 많이 흡수하는 경향이었고, $NH_4-N$, S, P, Mg, Fe보다 $NO_3-N$, K, Ca가 많았다. 또한 감귤잎 중 무기양분 함량도 공급되는 양액의 농도가 높을수록 증가하였다. 감귤나무의 주요 원소의 양액 농도 조성은 N, P, K, Ca, Mg 경우 각각 27.1, 16.5, 66.0, 80.0, $24.0mg\;L^{-1}$이 적당힌 것으로 사료된다.

• 대한화학회지
• /
• 제7권1호
• /
• pp.29-33
• /
• 1963

A new method determining the micro amount of cupferron spectrophotometrically was investigated and was considered on the various factors which affect on the method. The method was as follows; ferric alum solution was added in a suitably acidified solution of cupferron. After the precipitates of Fe(Ⅲ)-cupferrate were formed, they were extracted with chloroform and the absorbancy of the organic phase was measured by spectrophotometer, Beckmann Model B (1cm quartz cell). The stable maximum wavelength was 325 $m{\mu}$ at 3.0 to 5.6 of the optimum pH and it obeyed on Boer's law in the range of 5.76 ${\gamma}/ml$ to 74.80 ${\gamma}/ml$ of cupferron. The maximum wavelength was independent on pH, concentration of cupferron and of ferric alum. The absorbancy at 325 $m{\mu}$ was not affected by $SO_4^{--}$ and Ac, but was varied by $Cl^-$ and $NO_3^-$. Sulfuric acid and acetate buffer are preferred to the acid and buffer solution adjusting the pH. At higher acidity, however, the absorbancy was somewhat lowered because of the decomposition of cupferron, and at too high concentration of ferric alum, it was also decreased because of the difficulty in the extraction. By this method, it was able to determine cupferron quantitatively in the percent error of 1.18.