• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.63-72
• /
• 2006

Purpose: The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and Method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on future level (Group FIX-D), 2) Indirect method on fixture level(Group FIX-I), 3) Modified indirect method on fixture level(Group FD(-M), 4) Direct method on abutment level(Group AB-D) and 5) Indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^(R)$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results: The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2 In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.38.3-38.3
• /
• 2018

We present the results of high-resolution near-IR spectral mapping toward the Orion KL outflow. In this study, we used the Immersion Grating Infrared Spectrometer (IGRINS) on the 2.7 m Harlan J. Smith Telescope at McDonald Observatory. IGRINS's large wavelength coverage over the H & K bands and high spectral resolving power (R ~ 45,000) allowed us to detect over 35 shock-excited ro-vibrational H2 transitions and to measure directly the gas temperature and velocity of the dense outflows. In our previous study toward the H2 peak 1 region in the Orion KL outflow, we identified 31 outflow fingers from a datacube of the H2 1-0 S(1) $2.122{\mu}m$ line and constructed a three-dimensional map of the fingers. The internal extinction (${\Delta}AV$ > 10 mag) and overall angular spread of the flow argue for an ambient medium with a high density (105 cm-3). In this presentation, we show preliminary results of additional mapping toward a remarkable chain of bows (HH 205 - HH 207) farther from the ejection center, and obtain a more clear view of the shock physics of a single isolated bullet that improves on the knowledge gained from observations of the more complex peak 1 region in our earlier study.

• Journal of Korean Society for Quality Management
• /
• v.49 no.1
• /
• pp.17-29
• /
• 2021

Purpose: During 2015-2019, the average amount of political donation to the national assembly members in Korea was 1,000 won per person. Despite its benefits such as receiving tax credits, the donation system has not been actively practiced. This paper aims to promote political donations by suggesting a recommendation system of national assembly members by analysing the bills they proposed. Methods: In this paper, we propose a recommendation system based on two aspects: how similar the newly proposed or ammended bills are to the sponsors' interest (similarity index) and how much effort national assembly members put into those bills (intensity index). More than 25,000 bills were used to measure the recommendation quality index consisted with both the similarity and the intensity indices. Word2vec was used to calculate the similarity index of the bills proposed by the national assembly member to the sponsor's interest. The intensity index is calculated by diving the number of newly proposed or entirely revised bills with the number of senators who took part in those bills. Subsequently, we multiply the similarity index by the intensity index to obtain the recommendation quality index that can assist sponsors to identify potential assembly members for their donation. Results: We apply the proposed recommendation system to personas for illustration. The recommendation system showed an average f1 score about 0.69. The analysis results provide insights in recommendation for donation. Conclusion: n this study, the recommendation system was proposed to promote a political donation for national assembly members by creating the recommendation quality index based on the similarity and the intensity indices. We expect that the system presented in this paper will lower user barriers to political information, thereby boosting political sponsorship and increasing political participation.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.810-817
• /
• 2023

Objective: The aim was to compare the behavioral response to full separation of cows and calves maintained together for 100 days or 24 h. Methods: Twelve Holstein-Friesian cow-calf pairs were enrolled into either treatment or industry groups (n = 6 cow-calf pairs/group). The treatment cows and calves were maintained on pasture together for 106±8.6 d and temporarily separated twice a day for milking. The Industry cows and their calves, were separated within 24 h postpartum. Triaxial accelerometer neck-mounted sensors were fitted to cows 3 weeks before separation to measure hourly rumination and activity. Before separation, cow and calf behavior was observed by scan sampling for 15 min. During the separation process, frequency of vocalizations and turn arounds were recorded. At separation, cows were moved to an observation pen where behavior was recorded for 3 d. A CCTV camera was used to record video footage of cows within the observation pens and behavior was documented from the videos in 15 min intervals across the 3 d. Results: Before separation, industry calves were more likely to be near their mother than Treatment calves. During the separation process, vocalization and turn around behavior was similar between groups. After full separation, treatment cows vocalized three times more than industry cows. However, the frequency of time spent close to barrier, standing, lying, walking, and eating were similar between industry and treatment cows. Treatment cows had greater rumination duration, and were more active, than industry cows. Conclusion: These findings suggest a similar behavioral response to full calf separation and greater occurrence of vocalizations, from cows maintained in a long-term, pasture-based, cow-calf rearing system when ompared to cows separated within 24 h. However, further work is required to assess the impact of full separation on calf behavior.

• IMMUNE NETWORK
• /
• v.22 no.6
• /
• pp.51.1-51.20
• /
• 2022

Trypanosoma cruzi, the etiological agent of Chagas disease, is an intracellular protozoan parasite, which is now present in most industrialized countries. About 40% of T. cruzi infected individuals will develop severe, incurable cardiovascular, gastrointestinal, or neurological disorders. The molecular mechanisms by which T. cruzi induces cardiopathogenesis remain to be determined. Previous studies showed that increased IL-6 expression in T. cruzi patients was associated with disease severity. IL-6 signaling was suggested to induce pro-inflammatory and pro-fibrotic responses, however, the role of this pathway during early infection remains to be elucidated. We reported that T. cruzi can dysregulate the expression of host PIWI-interacting RNAs (piRNAs) during early infection. Here, we aim to evaluate the dysregulation of IL-6 signaling and the piRNAs computationally predicted to target IL-6 molecules during early T. cruzi infection of primary human cardiac fibroblasts (PHCF). Using in silico analysis, we predict that piR_004506, piR_001356, and piR_017716 target IL6 and SOCS3 genes, respectively. We validated the piRNAs and target gene expression in T. cruzi challenged PHCF. Secreted IL-6, soluble gp-130, and sIL-6R in condition media were measured using a cytokine array and western blot analysis was used to measure pathway activation. We created a network of piRNAs, target genes, and genes within one degree of biological interaction. Our analysis revealed an inverse relationship between piRNA expression and the target transcripts during early infection, denoting the IL-6 pathway targeting piRNAs can be developed as potential therapeutics to mitigate T. cruzi cardiomyopathies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.420-425
• /
• 2008

The storage of rice polishing (RP) with and without addition of antioxidant for sixteen weeks and its effect on rancidity and metabolizable energy values during the summer season was determined. Fifteen Single Comb White Leghorn cockerels of approximately uniform age and weight were procured and kept in metabolic cages under standard feeding and management practices. Five force feeding trials were conducted. In the first trial, fresh RP with 0 weeks of storage (diet 1 and 2) was used followed by four feeding trials with 4 (diet 3, 4), 8 (diet 5, 6), 12 (diet 7, 8), and 16 (diet 9, 10) weeks of storage of RP. The same birds were used in all trails. The birds were fasted for a period of 21 h, followed by force feeding of 20 g of RP with and without antioxidant for all storage periods. The control/fasting group was also maintained to measure endogenous fecal losses. Excreta were collected after 48 h for the determination of AME and TME values of RP. Along with the biological trials, laboratory assay of the RP stored with and without antioxidant was conducted to measure the extent of rancidity in terms of Thiobarbituric acid value (TBA). The TBA values were affected (p<0.05) by storage period and the values increased when the storage period increased from 4 to 16 weeks. However, the TBA values were significantly reduced (p<0.05) when RP was stored after addition of antioxidant when compared with the values obtained from RP stored without antioxidant (diet 3 vs. 4, 5 vs. 6, 7 vs. 8, and 9 vs. 10). The AME MJ/kg and TME MJ/kg values of RP were neither affected by increase in storage period nor addition of antioxidant. The findings of this study revealed that there was no effect of rancidity and storage time on the nutritive value, AME or TME of RP in poultry. However, TBA values were increased with the increase in storage period.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.265-273
• /
• 1999

Various oxide films are commonly used as a sacrificial layer or etch mask in the fabrication of microelectromechanical systems (MEMS). Large residual strain of these oxide films causes the wafer to bow, which can have detrimental effects on photolithography and other ensuing processes. This paper investigates the residual strain of tetraethoxysilane (TEOS), low temperature oxide (LTO), 7 wt% and 10 wt% phosphosilicate glass (PSG). Euler beams and a bent-beam strain sensor are used to measure the residual strain. A poly silicon layer is used as the sacrificial layer, which is selectively etched away by $XeF_2$. First, the residual strain of as-deposited films is measured, which is quite large. The residual strain of the films is also measured after annealing them not only at $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}$ and $800^{\circ}C$ in $N_2$ environment for 1 hour but also at the conditions for depositing a $2\;{\mu}m$ thick polysilicon at $585^{\circ}C$ and $625^{\circ}C$. Our results show that the 7 wt% PSG is best suited as the sacrificial layer for $2\;{\mu}$ thick polysilicon processes.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.206-215
• /
• 2017

Objectives: To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide ($Al_2O_3$) particles at different pressures. Materials and Methods: Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and ${\chi}^2$ tests (${\alpha}=0.05$). Results: The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure. Conclusions: CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.

• Therapeutic Science for Rehabilitation
• /
• v.2 no.1
• /
• pp.36-47
• /
• 2013

Objective : To identify the effect of bilateral arm training for activities of daily living(ADL) of the chronic phase after stroke. Methods : 20 patients with stroke, randomized to an experimental group(n=10) and a control group(n=10). Both groups received the usual occupational therapy. In addition, an experimental group received an bilateral arm training, 30-min sessions per a day for 6 weeks. The Functional Independence Measure(FIM) was used to evaluate ADL for both groups. Results : First, there is a significant difference before and after receiving the bilateral arm training(p <.05). Second, there are significant differences in all ADL areas of Self-care, Transfer, Social cognition after bilateral arm training(p<.05). Third, there are significant differences in all sub-areas of Self-care, only stairs of Locomotion, and only Problem solving of Social cognition by comparing sub-areas as bilateral arm activity(before and after) and occupational therapy intervention(before and after). Conclusion : Using bilateral arm training for the chronic phase after stroke improved their abilities of ADL. Therefore, there are an expectation to use bilateral activity training for the chronic after stroke clinically and a need of further study about bilateral arm training related to ADL in the future.