• 대한치과보철학회지
• /
• 제49권4호
• /
• pp.324-332
• /
• 2011

연구 목적: 다양한 물성의 층으로 제작된 마우스가드를 장착하였을 때 치아와 악골에 가해지는 힘의 유한요소 분석을 시행하기 위함이다. 연구 재료 및 방법: 연구대상의 모형을 교합기에 장착한 뒤 Signature Mouthguard System (Dreve dentamid GmbH., Unna, Germany)을 이용하여 맞춤형 구강보호장치를 제작하여 장착한 후 두정부에서 경추까지 1.0 mm로 컴퓨터 단층촬영을 시행하였다. 영상을 Cantibio BIONIX 프로그램을 이용하여 3차원 유한요소 모델을 생성한 뒤 HyperMesh 소프트웨어를 이용하여 데이터 분석을 시행하였다. 마우스가드는 층에 따라 다음과 같이 분류하였다. 1. 연질(Bioplast)(SG) 2. 경질(Duran)(HG) 3. 중질(Drufomat)(MG) 4. 연질+중질(SG + HG) 5. 경질 + 연질(HG + SG) 6. 연질 + 경질 + 연질(SG + HG + SG) 7. 경질 + 연질 + 경질(HG + SG + HG) 하중위치는 하악골의 전방 이부(F1), 하악 좌측 제1대구치 하방의 하악체 중앙(F2), 하악각의 전연(F3) 세점으로 하였고 FH Plane에 45도 방향으로 800N, 0.1초의 힘을 가하였다. 통계방법으로는 반복분산분석과 사후분석(다중비교분석(Multiple comparison test) DUNCAN test)을 이용하였다. SPSS 소프트웨어 (Ver.13, SPSS Inc., Chicago, IL, USA)를 사용하여 분석하였다. 결과: 치아와 상악골에서의 응력분포는 모든 하중위치에 대하여 연질층이 하악 치아에 접촉하는 구강보호장치가 적은 응력값을 나타냈으며, 과두에서의 응력분포는 모든 하중위치에 대하여 경질층이 하악 치아에 접촉하는 구강보호장치가 적은 응력값을 나타내었다. 두 연질층 사이에 경질층이 개재된 세층의 구강보호장치가 하중 시 상대적으로 고르게 응력이 분산되는 것으로 나타났다. 결론: 상하악 치아에는 연질층이 접촉하고 두 연질층 사이에 경질층을 삽입하는 형태의 구강보호장치가 악안면 외상 시 상대적으로 하중을 분산시키는데 가장 우수하다고 생각된다.

• Strategy21
• /
• 통권34호
• /
• pp.58-92
• /
• 2014

Even after S. Korea took 5.24 Measure(24 May 2014), N. Korea has not stopped raising provocations such as the shelling of Yeonpyeong Island, electronic and cyber attacks. To make matters worse, the communist country lunched long-range missiles(twice) and conducted 3rd nuclear test, escalating tensions which could possibly lead to an all-out war. Korean Government failed to respond properly. However, escalation into an all-out war was deterred by the CFC immediately carrying out its peacetime duty(CODA). The US made a rapid dispatch of its augmentation forces(Aircraft carrier, nuclear-powered submarine, strategic bomber, F-22) to the Korean Peninsula. In recognition of the importance of the Combined Forces Command, since May 2013 the Park Geun-Hye Administration has been pushing ahead with re-postponement of Wartime Operational Control Transfer(which initially meant the disassembling of the CFC as of 1 December 2015) More recently, there has been a series of unusual indicators from the North. Judging from its inventory of 20 nuclear weapons, 1,000 ballistic missiles and biochemical weapons, it is safe to say that N. Korea has gained at least war deterrence against S. Korea. Normally a nation with nuclear weapons shrink its size of conventional forces, but the North is pursuing the opposite, rather increasing them. In addition, there was a change of war plan by N. Korea in 2010, changing 'Conquering the Korean Peninsula' to 'Negotiation after the seizure of the Greater Seoul Metropolitan Area(GSMA)' and establishing detailed plans for wartime projects. The change reflects the chain reaction in which requests from pro-north groups within the South will lead to the proclamation of war. Kim, Jeong-Un, leader of N. Korean regime, sent threatening messages using words such as 'exercising a nuclear preemptive strike right' and 'burning of Seoul'. Nam, Jae-June, Director of National Intelligence Service, stated that Kim, Jung-Un is throwing big talks, saying communization of the entire Korean Peninsula will come within the time frame of 3 years. Kim, Gwan-Jin, Defense Minister, shared an alarming message that there is a high possibility that the North will raise local provocations or a full-fledged war whenever while putting much emphasis on defense posture. As for the response concept of the Korean Government, it has been decided that 'ROK·US Combined Local Provocation Counter-Measure' will be adopted to act against local provocations from the North. Major provocation types include ▲ violation of the Northern Limit Line(NLL) with mobilization of military ships ▲ artillery provocations on Northwestern Islands ▲ low altitude airborne intrusion ▲ rear infiltration of SOF ▲ local conflicts within the Military Demarcation Line(MDL) ▲ attacking friendly ships by submarines. Counter-measures currently established by the US involves the support from USFK and USFJ. In order to keep the sworn promise, the US is reinforcing both USFK and USFJ. An all-out war situation will be met by 'CFC OPLAN5027' and 'Tailored Expansion Deterrence Forces' with the CFC playing a central role. The US augmentation forces stands at 690,000 troops, some 160 ships, 2,000 aircraft and this comprise 50% of US total forces, which is estimated to be ninefold of Korean forces. The CFC needs to be in center in handling both local provocations and an all-out war situation. However, the combat power of S. Korean conventional forces is approximately around 80% of that of N. Korea, which has been confirmed from comments made by Kim, Gwan-Jin, Defense Minister, during an interpellation session at the National Assembly. This means that S. Korean forces are not much growing. In particular, asymmetric capabilities of the North is posing a serious threat to the South including WMD, cyber warfare forces, SOF, forces targeting 5 Northwestern Islands, sub-surface and amphibious assault forces. The presence of such threats urgently requires immediate complementary efforts. For complementary efforts, the Korean Government should consider ① reinforcement of Korean forces; putting a stoppage to shrinking military, acquisition of adequate defense budget, building a missile defense and military leadership structure validity review, ② implementation of military tasks against the North; disciplinary measures on the sinking of ROKS Cheon-an/shelling of Yeonpyeong Islands, arrangement of inter-Korean military agreements, drawing lessons from studies on the correlation between aid for N. Korea, execution of inter-Korean Summit and provocations from the North, and ③ bolstering the ROK·US alliance; disregarding wartime operational control transfer plan(disassembling of CFC) and creation of a combined division.

• 한국의학물리학회지:의학물리
• /
• 제26권2호
• /
• pp.72-78
• /
• 2015

유기용제는 현기증, 행동장애, 주의산만, 말초신경증과 같은 신경 독성을 일으키는 물질로 잘 알려져 있다. 그러나, 이러한 신경 독성물질인 유기 용제에 노출된 근로자들이 작업 기억 기능을 수행할 때 인지 부하에 어떻게 영향을 받는지에 관해서 많이 연구가 되어오지 않았다. 따라서, 본 연구에서는 기능적인 자기공명영상을 이용하여 만성적으로 유기용제에 노출된 근로자들이 인지 부하에 따른 작업 기억 기능을 수행할 때 보여지는 신경 변화의 관계를 살펴보았다. 29명의 유기용제에 노출된 근로자들을 대상으로 언어적 작업 기억 기능(1-back and 2-back)을 수행시켰으며 낮은 인지 부하와 높은 인지 부하의 작업 기억 기능을 수행할 때, 인지 부하의 차이에 따라 활성화 되는 뇌 영역의 차이를 구하였다. 1-back의 반응속도가 증가함에 따라 좌측 하위 두정 피질에서의 뇌 활성화가 점점 증가하는 관계를 보였는데, 이러한 증가되는 양상이 더 높은 인지 부하인 2-back에서는 보여지지 않았다. 이를 통해, 인지 부하가 많이 걸릴수록 활성화 되는 뇌 영역이 많아지며, 유기용제에 노출된 근로자들은 어느 정도 낮은 인지 부하가 걸렸을 때는 그만큼의 뇌 활성화가 증가되는데, 높은 인지 부하가 걸리게 되면 더 이상 뇌 활성화가 증가되지 않고 한계에 다다르는 것을 알 수 있었다.

• 한국산림과학회지
• /
• 제108권2호
• /
• pp.216-223
• /
• 2019

이 연구는 경상북도 경주시 양북면 일원의 산지 땅밀림의 지질특성 및 땅밀림 후 변화되는 토양의 물리적 특성을 구명하고자 수행하였다. 조사지역의 지질은 생성시대가 백악기의 경상누층군으로 주된 구성 암석은 흑색셰일이며, 동쪽으로는 석영 장석질 반암이 분포하고, 그보다 아래쪽은 제4기 연일층군 역암이 분포한다. 암석은 매우 풍화된 풍화암의 형태를 나타내고 있어 땅밀림 지질로 나타났다. 땅밀림으로 무너진 최대 깊이는 12.0 m까지 붕적층으로 구성되어 있다. 땅밀림 방향은 비탈면 하부는 $N46^{\circ}E$, 땅밀림지 상단부는 $N62^{\circ}E$로 절리 및 주향 방향으로 발생하였다. 땅밀림으로 교란된 토양에서는 토양깊이 20 cm 까지는 토양경도가 기록되지 않는 완전교란상태이었고, 토양깊이 25 cm~90 cm까지는 자연산림지 및 교란이 발생되지 않은 지역에 비해 토양경도는 1.4~-4.7배 낮게 나타났다. 또한 땅밀림지역의 토양용적밀도는 $1.24{\sim}1.29g/cm^2$로 자연산림지보다 각각 약 1.6배 높게 나타났다. 토양의 공극률은 51.5~53.3%로 자연산림지보다 각각 약 1.3~1.4배 낮았다. 흑색 셰일지역의 토양투수계수는 8.75E-06 cm/s, 토양의 조공극률은 9.8%로 가장 낮게 나타났다.

• 천문학회지
• /
• 제48권4호
• /
• pp.213-228
• /
• 2015

The Horizon Run 4 is a cosmological N-body simulation designed for the study of coupled evolution between galaxies and large-scale structures of the Universe, and for the test of galaxy formation models. Using 6300³ gravitating particles in a cubic box of L_box = 3150 h⁻¹Mpc, we build a dense forest of halo merger trees to trace the halo merger history with a halo mass resolution scale down to M_s = 2.7 × 10¹¹h⁻¹M_⊙. We build a set of particle and halo data, which can serve as testbeds for comparison of cosmological models and gravitational theories with observations. We find that the FoF halo mass function shows a substantial deviation from the universal form with tangible redshift evolution of amplitude and shape. At higher redshifts, the amplitude of the mass function is lower, and the functional form is shifted toward larger values of ln(1/σ). We also find that the baryonic acoustic oscillation feature in the two-point correlation function of mock galaxies becomes broader with a peak position moving to smaller scales and the peak amplitude decreasing for increasing directional cosine μ compared to the linear predictions. From the halo merger trees built from halo data at 75 redshifts, we measure the half-mass epoch of halos and find that less massive halos tend to reach half of their current mass at higher redshifts. Simulation outputs including snapshot data, past lightcone space data, and halo merger data are available at http://sdss.kias.re.kr/astro/Horizon-Run4.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.29-35
• /
• 2016

PURPOSES : The new waste management policy of South Korea encourages the recycling of waste materials. One material being recycled currently is tire-derived fuel (TDF) ash. TDF is composed of shredded scrap tires and is used as fuel in power plants and industrials plants, resulting in TDF ash, which has a chemical composition similar to that of the fly ash produced from coal. The purpose of this study was to evaluate the properties of an asphalt concrete mix that used TDF ash as the mineral filler. METHODS : The properties of the asphalt concrete were evaluated for different mineral filler types and contents using various measurement techniques. The fundamental physical properties of the asphalt concrete specimens such as their gradation and antistripping characteristics were measured in accordance with the KS F 3501 standard. The Marshall stability test was performed to measure the maximum load that could be supported by the specimens. The wheel tracking test was used to evaluate the rutting resistance. To investigate the moisture susceptibility of the specimens, dynamic immersion and tensile strength ratio (TSR) measurements were performed. RESULTS : The test results showed that the asphalt concrete containing TDF ash satisfied all the criteria listed in the Guide for Production and Construction of Asphalt Mixtures (Ministry of Land, Infrastructure and Transport, South Korea). In addition, TDF ash exhibited better performance than that of portland cement. The Marshall stability of the asphalt concrete with TDF ash was higher than 7500 N. Further, its dynamic stability was also higher than that listed in the guide. The results of the dynamic water immersion and the TSR showed that TDF ash shows better moisture resistance than does portland cement. CONCLUSIONS : TDF ash can be effectively recycled by being used as a mineral filler in asphalt, as it exhibits desirable physical properties. The optimal TDF ash content in asphalt concrete based on this study was determined to be 5%. In future works, the research team will compare the characteristics of asphalt concrete as function of the mineral filler types.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.146-155
• /
• 2014

In this study, we conduct fretting corrosion tests on tin-plated brass coupons to investigate the effect of temperature on fretting corrosion for various span amplitudes. We prepare a coupled fretting corrosion specimens using a tin-plated brass coupon with a thickness of $10{\mu}m$. One specimen is a flat coupon and the other specimen is a coupon with a protuberance in 1 mm radius, which is produced using 2 mm diameter steel ball. We conduct fretting corrosion tests at $25^{\circ}C$, $50^{\circ}C$, $75^{\circ}C$, $100^{\circ}C$ by rubbing the coupled coupons together at the contact between the flat and protuberance coupons. We measure electric resistance of the contact during the fretting corrosion test period. There is increase in resistance with fretting cycles. It is found that rate of increase in electric resistance becomes faster with increase in testing temperature. Magnitude of friction coefficient increases with fretting span amplitudes. And, change in friction coefficient becomes desensitized to the increment in span amplitude. Assuming that failure cycle is the cycle with an electric resistance of $0.01{\Omega}$, we find that failure lifetime ($N_f$) decreases with increase in testing temperature. Furthermore, based on the assumption that the damage rate of the connector is inversely related to the failure cycle, we calculate the activation energy for fretting damage to be 13.6 kJ/mole by using the Arrhenius equation. We propose a method to predict failure cycle at different temperatures for span amplitudes below $30{\mu}m$. Friction coefficients generally increase with increase in span amplitude and decrease in testing temperature.

• Nuclear Engineering and Technology
• /
• 제42권2호
• /
• pp.203-210
• /
• 2010

The $\underline{H}igh$ flux $\underline{A}dvanced$ $\underline{N}eutron$ $\underline{A}pplication$ $\underline{R}eact\underline{O}r$ (HANARO), an open-tank-in-pool type reactor, is one of the multi-purpose research reactors in the world. Since the commencement of HANARO's operations in 1995, a significant number of experimental facilities have been developed and installed at HANARO, and continued efforts to develop more facilities are in progress. Owing to the stable operation of the reactor and its frequent utilization, more experimental facilities are being continuously added to satisfy various fields of study and diverse applications. The irradiation testing equipment for nuclear fuels and materials at HANARO can be classified into capsules and the Fuel Test Loop (FTL). Capsules for irradiation tests of nuclear fuels in HANARO have been developed for use under the dry conditions of the coolant and materials at HANARO and are now successfully utilized to perform irradiation tests. The FTL can be used to conduct irradiation testing of a nuclear fuel under the operating conditions of commercial nuclear power plants. During irradiation tests conducted using these capsules in HANARO, instruments such as the thermocouple, Linear Variable Differential Transformer (LVDT), small heater, Fluence Monitor (F/M) and Self-Powered Neutron Detector (SPND) are used to measure various characteristics of the nuclear fuel and irradiated material. This paper describes not only the status of HANARO and the status and perspective of irradiation devices and instrumentation for carrying out nuclear fuel and material tests in HANARO but also some results from instrumentation during irradiation tests.

• 한국임상수의학회지
• /
• 제23권4권
• /
• pp.453-457
• /
• 2006

This study determined the effects of several reproductive factors at prostaglandin $F_{2{\alpha}}\;(PGF_{2{\alpha}})$ administration on the subsequent estrous exhibition and conception. Three hundreds and twenty six dairy cows in seven dairy herds received a 25 mg $PGF_{2{\alpha}}$ after confirming the presence of corpus luteum (CL) by ultrasonography, and the cows exhibited estrus within 7 days following $PGF_{2{\alpha}}$ administration were artificially inseminated (AI). Two hundreds cows among the 326 cows received additional ultrasonography at $PGF_{2{\alpha}}$ administration to measure the diameters of the largest follicle and CL on ovaries, and blood samples collected from the cows were analyzed for serum progesterone (P4) level. Cow parity, days open, body condition score (BCS), season and herd variables were recorded. Of the treated 326 cows, 171 cows (52.5%) showed estrus within 7 days after treatment, and the conception rate following AI was 37.4% (64/171). There were significant differences on the estrous exhibition ($31.3{\sim}65.8%$, p<0.01) and conception rates ($23.1{\sim}66.7%$, p<0.05) among the herds, while cow parity, days open, BCS and season did not affect the subsequent estrous exhibition and conception rates. The diameters of the largest follicle and CL on ovaries, and serum P4 level at the $PGF_{2{\alpha}}$ administration were not related to the subsequent estrous exhibition and conception. The results indicate that the improved outcomes of synchronization of estrus using a single $PGF_{2{\alpha}}$ administration may be related to the appropriate management of the herd.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.475-486
• /
• 2015

Mode II fracture toughness ($K_{IIc}$) of fiber reinforced concrete (FRC) has been widely investigated under various patterns of test specimen geometries. Most of these studies were focused on single type fiber reinforced concrete. There is a lack in such studies for hybrid fiber reinforced concrete. In the current study, an experimental investigation of evaluating mode II fracture toughness ($K_{IIc}$) of hybrid fiber embedded in high strength concrete matrix has been reported. Three different types of fibers; namely steel (S), glass (G), and polypropylene (PP) fibers were mixed together in four hybridization patterns (S/G), (S/PP), (G/PP), (S/G/PP) with constant cumulative volume fraction ($V_f$) of 1.5 %. The concrete matrix properties were kept the same for all hybrid FRC patterns. In an attempt to estimate a fairly accepted value of fracture toughness $K_{IIc}$, four testing geometries and loading types are employed in this investigation. Three different ratios of notch depth to specimen width (a/w) 0.3, 0.4, and 0.5 were implemented in this study. Mode II fracture toughness of concrete $K_{IIc}$ was found to decrease with the increment of a/w ratio for all concretes and test geometries. Mode II fracture toughness $K_{IIc}$ was sensitive to the hybridization patterns of fiber. The (S/PP) hybridization pattern showed higher values than all other patterns, while the (S/G/PP) showed insignificant enhancement on mode II fracture toughness ($K_{IIc}$). The four point shear test set up reflected the lowest values of mode II fracture toughness $K_{IIc}$ of concrete. The non damage defect concept proved that, double edge notch prism test setup is the most reliable test to measure pure mode II of concrete.