• 벤처창업연구
• /
• 제9권1호
• /
• pp.133-140
• /
• 2014

본 연구는 노인장기요양시설의 위탁과 직영이라는 운영형태에 따른 조직성과의 차이와 노인복지시설 서비스관리 구성요인과 조직성과간의 관계를 분석하는데 목적이 있다. 연구대상은 2012년 9월 현재, 서울, 인천, 경기도 등 수도권 지역에 위치한 민간위탁 및 공공직영 노인요양시설의 종사자를 대상으로 삼았다. 독립변수로서 조직성과 결정요인이 될 서비스관리요소는 리더십, 교육훈련, 보상, 참여, 서비스품질이며, 종속변수인 조직성과는 직무만족, 업무성과, 재무적성과, 수혜자지향성으로 선정하였다. 본 연구의 결과를 정리하면 다음과 같다. 첫째, 서비스관리 구성요인이 직무만족에 미치는 영향은 회귀분석 유의수준의 .001(F=37.429)으로 유의미한 것으로 나타났고 정의관계로 나타났다. 둘째, 서비스관리 구성요인이 업무성과에 미치는 영향은 회귀분석 유의수준의 .001(F=55.099)에서 유의한 것으로 나타났다. 셋째, 서비스관리 구성요인이 재무적성과에 미치는 영향은 회귀분석 유의수준의 .001(F=56.904)에서 유의한 것으로 나타났으며 정의 관계로 나타났다, 넷째, 서비스관리 구성요인이 수혜자지향성에 미치는 영향은 회귀분석 유의수준의 .001(F=61.367)에서 유의한 것으로 나타났으며 서비스 구성요인 중 직원의 보상이 가장 커다란 영향을 주는 것으로 나타났다. 연구결과를 토대로 사회복지 정책적 함의를 제시하였다.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.85-85
• /
• 2003

Human lactoferrin (hLF) is an 80 kDa iron-binding glycoprotein that is expressed in high concentration in milk and in lesser amount in the secondary or specific granules of neutrophils and in plasma, LF is classically considered to be related to the binding, transport, and storage of iron. The transgenic mice carrying the human hLF gene in conjunction with the bovine $\beta$-casein promoter produced the human hLF in their milk during lactation. To screen transgenic mice, PCR was carried out using chromosomal DNA extracted from tail or toe tissues. In this study, stability of germ line transmission and expression of hLF were monitored up to generation Fl7 of a transgenic line. When female mouse of generation F9 was crossbred with normal male, generation F9 to Fl7 mice showed similar transmission rates ($66.0 \pm 12.57%, 42.0 \pm 14.98%, 72.2 \pm 25.45%, 50.0 \pm 16.70%, 65.7 \pm 6.45%, 48.6 \pm 14.65%, 54 1 \pm 18 11%, 57.8 \pm 16.16% and 48.6 \pm 20.66$, respectively), implying that the hLF gene can be transmitted stably up to long term generation in the transgenic mice For ELISA analysis, hLF expression levels were determined with an hLF ELISA kit in accordance with the supplier's protocol. Expression levels of human hLF from milk of generation F9 to Fl3 mice were $ 3.2 \pm 0.69 mg/ml, 3.1 \pm 0.81 mg/ml, 4.6 \pm 1.38 mg/ml, 3.1 \pm 0.42 mg/ml, and 4.5 \pm 1,48 mg/ml$, respectively. These expression levels were lower than that of founder (6.6 mg/$m\ell$) mouse. We concluded that transgenic mice faithfully passed the transgene on their progeny and successively secreted target proteins into their milk through several generations.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.24-29
• /
• 2011

The design of a telecentric f-${\theta}$ lens with a field of view (FOV) $30^{\circ}$ and an effective focal length of 1000mm is presented. The optical stop is placed at the front plane and the design is based on a geometric ray tracing technique, and the designed system consists of a series of convex and concave lenses. The designed f-${\theta}$ lens showed a considerable reduction in weight with a simplified structure and resulted in a good performance in the designated FOV. Detail analysis of rays is also presented. 653nm (red laser), 586nm (green laser), and 468nm (blue laser) were simulated as a light source and image illuminating source. The developed optical design requires 7 pieces of lenses made of SF1, N-FK56, N-LAK33, and BK7 glass materials. With optimal parametric design, the effective focal length was calculated to be 974.839mm which is very close to the initial design target. For the manufacturing purpose, the dimensions of lens curvature and thickness were truncated with error ranging 0.1% to 3.2%. As a result, the overall error was calculated to be 3.2% which can be still tolerable for display, laser material, and machining processing.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.10-19
• /
• 1996

This paper presents a finger-shaped multisensor system which can measure the tyep and position of a target surface by contactl. The multi-sensor system consists of a sphere-shpaed optical tactile sensor located at the finger tip and a force/torque sensor located at the joint of a finger. The optial tactile sensor determines the type and position of the target surface using the shape and position of the CCD image of the touching area generated by a contact between the sensor and the taget surface. The force/torque sensor also determines the position and surface normal vector by applying the distributionof forces and torques t the contact point to the equations of finger shape. The measurements on the position and surface normal vector at a contact point obtined by two individual sensors are fused using a statistical method. The integrated sensor system has 0.8mm error in position measurement and 1.31$^{\circ}$ error in normal vector measurement. The developed sensor system has many applications, such as autonomous compliance control, automatic grasping and recognition, etc.

• 음성과학
• /
• 제7권1호
• /
• pp.203-216
• /
• 2000

The purpose of this study is to revisit the property of the Korean plain stops in intervocalic position. More specifically, focusing on a word-internal, intervocalic position, this study investigates 1) how often speakers pronounce intervocalic. stops as fully voiced, 2) in what amount each speaker voice the plain stops during the stop closure, 3) whether the preceding or the following vowel influences the voicing of target consonants, and 4) the fundamental frequency pattern at the vowel onset after the target consonant shows any consistent pattern, regardless of whether voicing is present during the closure. The results of this study give strong support for the phonetic account of the voicing distinction in Korean. (Jun 1995, 1996).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• 대한불안의학회지
• /
• 제15권2호
• /
• pp.68-76
• /
• 2019

Objective : The goal of this study was to investigate the characteristics of early maladaptive schemas (EMSs), and associated neurocognitive functions as seen in visitors for military designation process. Methods : This retrospective study included 111 males aged 18 to 24 years among three groups: 41 visitors for military designation process (VMD), 21 patients with obsessive-compulsive disorder (OCD), and 49 healthy subjects. We collected the results of the Young Schema Questionnaire, Symptom Checklist-90-Revised, three neurocognitive tests as well as their clinicodemographic data. We analyzed the differences in EMSs between these three groups, and the correlations among the identified EMSs and neurocognitive performances within the VMD group. Results : Compared with both the OCD and healthy groups, the evaluation of the VMD group showed significantly higher scores in mistrust/abuse (F=6.4, p=0.002), vulnerability to harm (F=6.6, p<0.0001) and negativity/pessimism schema (F=7.3, p<0.0001), even when controlling for depression scores and levels of education. These three schemas also exhibited significant negative correlations with the score of Stroop test with r ranging from -0.34 to -0.44. Conclusion : These findings suggest that people who are likely to have difficulties adjusting to living in a military life may have psychological vulnerabilities related to certain EMSs. Further studies are warranted to test the clinical potentials of these findings, such as a treatment target and a predictor factor.

• Genomics & Informatics
• /
• 제21권1호
• /
• pp.7.1-7.11
• /
• 2023

The gram-positive bacterium Listeria monocytogenes is an important foodborne intracellular pathogen that is widespread in the environment. The functions of hypothetical proteins (HP) from various pathogenic bacteria have been successfully annotated using a variety of bioinformatics strategies. In this study, a HP Imo0888 (NP_464414.1) from the Listeria monocytogenes EGD-e strain was annotated using several bioinformatics tools. Various techniques, including CELLO, PSORTb, and SOSUIGramN, identified the candidate protein as cytoplasmic. Domain and motif analysis revealed that the target protein is a PemK/MazF-like toxin protein of the type II toxin-antitoxin system (TAS) which was consistent with BLASTp analysis. Through secondary structure analysis, we found the random coil to be the most frequent. The Alpha Fold 2 Protein Structure Prediction Database was used to determine the three-dimensional (3D) structure of the HP using the template structure of a type II TAS PemK/MazF family toxin protein (DB ID_AFDB: A0A4B9HQB9) with 99.1% sequence identity. Various quality evaluation tools, such as PROCHECK, ERRAT, Verify 3D, and QMEAN were used to validate the 3D structure. Following the YASARA energy minimization method, the target protein's 3D structure became more stable. The active site of the developed 3D structure was determined by the CASTp server. Most pathogens that harbor TAS create a crucial risk to human health. Our aim to annotate the HP Imo088 found in Listeria could offer a chance to understand bacterial pathogenicity and identify a number of potential targets for drug development.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.669-676
• /
• 1995

In this study, EO glass films were deposited by R.F. magnetron sputtering using EO glass target. The glass formation of the EO film was greatly dependent on the substrate temperature and the crystallization started at approximately 28$0^{\circ}C$. As the temperature of the substrate or the oxygen content in the sputtering gas increased, UV/VIS/NIR absorption edge moved toward longer wavelength. A wave guiding phenomenon was observed from the prism-coupler experiment and a fluorescence of 1.06${\mu}{\textrm}{m}$ originated from 4Fe3/2longrightarrow4I11/2 transition of Nd3+ was detected from the film containing Nd3+ ions.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.38-45
• /
• 1999

Formaldehyd/Urea 몰비의 변이가 목질 원재료의 형상이 상이한 합판, SLPB, STPB의 접착성과 물성에 미치는 영향을 조사한 본 연구는 요소수지 F/U 몰비 1.0, 1.2, 1.4, 1.6, 1.8, 2.0으로 요소수지를 제조하고 그 형상이 상이한 목질 원재료인 veneer, sliver-particle, strand-particle를 원료로 하여 각 몰비별 합판, SLPB, STPB를 제조하였다. 합판의 상태접착력, SLPB, STPB의 밀도, 함수율, 박리강도, 휨강도, 두께 팽창율을 시험하였다. 실험 결과를 요약하면 다음과 같다. 1. 합판의 접착력은 F/U 몰비 1.2에서 가장 우수한 값을 나타냈으며 전 몰비 모두 KS 합판 접착성(비내수) 규격인 7.5kgf/$cm^2$을 상회하는 14kgf$cm^2$ 이상을 나타냈다. 또한 F/U 몰비 1.2의 경우 본 연구자(1998)의 연구결과인 formaldehyde 방출 무취기준(5mg/$\ell$ 이하)율 만족시키면서 우수한 접착성울 나타냈다. 2. 박리강도는 SLPB 및 STPB 공히 모두 F/U 몰비 1.0, 2.0이 낮은 결과치를 나타냈고 1.2~1.8사이에서는 큰차이는 없었으며, SLPB의 경우 4.8~5.9kgf/$cm^2$의 값의 분포를 STPB는 5.4~6.7 kgf/$cm^2$의 분포를 보이고 있어 STPB가 우수한 박리강도를 나타냈다. 이 결과에서 F/U 몰비에 따른 박리강도의 영향 보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 3. 휨강도도 역시 SLPB 및 STPB 공히 F/U 몰비 1.0, 2.0이 낮은 결과치를 나타냈다. STPB 전몰비 모두가 KS 규격 200 Type(휨강도가 180kgf/$cm^2$) 이상을 만족시키는 결과를 보였고 SLPB의 경우도 전몰비 모두 KS 규격 150 Type(휨 강도가 130kgf/$cm^2$)이상을 만족시키는 결과를 나타냈다. 이 결과에서는 전체적으로 STPB가 SLPB에 비하여 2배 이상의 우수한 강도를 보였다. 이는 휨강도에서도 F/U 몰비에 따른 영향보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 4. 두께 팽창율에서는 고몰비인 2.0, 1.8 저몰비인 1.0, 1.2에서 SLPB, STPB 모두 높은 두께 팽창율을 보였으며 STPB의 경우 F/U 몰비 1.6에서 SLPB의 경우는 F/U 몰비 1.4에서 가장 낮은 두께 팽창율을 나타냈다. 그리고, STPB의 경우 6몰비 모두 KS기준 12% 이하를 만족시키고 있었으나 SLPB에서는 그 기준을 모두 상회하고 있음을 알 수 있었다. 전체적으로는 SLPB가 STPB보다 약 2배의 두께 팽창율을 나타내 두께 팽창율에서도 F/U 몰비에 따른 영향보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 본 실험의 결과를 종합적으로 살펴보면 합판의 접착성 및 보드의 재질에 미치는 영향은 F/U 몰비의 변이 보다는 원재료의 형상의 영향이 이 더욱 크게 작용한다는 사실을 알 수 있었으며 보드의 제조기준이 본 실험과 동일하다면 합판의 접착성과 PB의 물리적, 기계적 성질과 본 연구자(1998)의 연구결과인 formaldehyde 방출량 및 방출경향을 고려할 때 사용처와 용도에 따라 합판의 경우 우수한 접착력과 KS formaldehyde 무취기준을 만족시키는 F/U 몰비 1.2를 PB의 경우 양호한 휨강도, 박리강도, 비교적 낮은 두께 팽창율과 KS formaldehyde E2형 (5mg/$\ell$ 이하)기준율 만족시키는 F/U 몰비 1.2~1.4가 사용되어야 함을 알 수 있었다.