• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.699-706
• /
• 2007

The cooling heat transfer coefficient and pressure drop of $CO_2$(R-744) in helical coil copper tubes were investigated experimentally The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter. a pre-heater and a inclined helical coil type gas cooler (test section). The test section consists of a smooth copper tube of 2.45 and 4.55mm inner diameter The refrigerant mass fluxes were varied from 200 to $600 [kg/m^2s]$ and the inlet pressures of 9as cooler were 7.5 to 10.0 [MPa]. The heat transfer coefficients of $CO_2$ in helical coil tubes increase with the increase of mass flux and gas cooling pressure of $CO_2$. The pressure drop of $CO_2$ in the gas cooler shows a relatively food agreement with those Predicted by Ito's correlation developed for single-phase in helical coil tubes. Though a few correlation available with the data. the local heat transfer coefficient of $CO_2$ agrees well with those presented by Pitla et al. among the predictions. However at the region near pseudo-critical temperature. the experiment data indicate higher values than the Pitla et al. correlation.

• Environmental and Resource Economics Review
• /
• v.14 no.3
• /
• pp.569-593
• /
• 2005

This study tests for the law of one price and Grander Causality between the EU ETS and Nord Pool $CO_2$ allowance prices. The Johansen cointegration test shows that there exists a long run equilibrium between EU ETS and Nord Pool prices and support the law of one price. The Granger casuality test suggests that the EU ETS leads Nord Pool for all vintages traded. The test results imply that the EU ETS can be regarded as the representative carbon market in the EU where many exchanges just started competing for the newly rising market for carbon.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.379-379
• /
• 2018

MXenes are a new family of 2D transition metal carbide nanosheets analogous to graphene (Lv et al., 2017; Sun et al., 2018). Due to the easy availability, hydrophilic behavior, and tunable chemistry of MXenes, their use in applications for environmental pollution remediation such as heavy metal adsorption has recently been explored (Li et al., 2017). In this study, three-dimensional (3D) MXene ($Ti_3C_2T_x$) films with high adsorption capacity, good mechanical strength, and high selectivity for specific radionuclide from aquose solution were successfully fabricated by a polymeric precursor method using vacuum-assisted filtration. The highest removal efficiency on the films was 99.54%, 95.61%, and 82.79% for $Sr^{2+}$, $Co^{2+}$, and $Cs^+$, respectively, using a film dosage of 0.06 g/ L in the initial radionuclide solution (each radionuclide concentration = 1 mg/L and pH = 7.0). Especially, the adsorption process reached an equilibrium within 30 min. The expanded interlayer spacing of $Ti_3C_2T_x$ sheets in MXene films showed excellent radionuclide selectivity ($Cs^+$ and/or $Sr^{2+}/Co^{2+}$) (Simon, 2017). Besides, the MXene films was not only able to be easily retrieved from an aqueous solution by filtration after decontamination processes, but also to selectively separate desired target radionuclides in the solutions. Therefore, the newly developed MXene ($Ti_3C_2T_x$) films has a great potential for radionuclide removal from aqueous solution.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.11-17
• /
• 2013

To investigate the effects of co-solvents on the morphology of nano-scale zein materials, zein solutions were electrospun with different co-solvent ratios of EtOH/$H_2O$. Different zein solution concentrations were used to study the effects of the zein content on the electrospun materials. The resulting electrospun materials were all characterized using field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The diameters of the electrospun nanoparticles and nanofibers were found to increase when increasing the EtOH ratio at certain zein concentrations. Furthermore, increasing the zein content changed the morphology of the electrospun materials from nanoparticles to nanofibers.

• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.258-263
• /
• 2004

In this study, we carried out a basic study for the development of optical transcutaneous $pCO_{2}$ gas sensor and analyzer using non-invasive method. The basic principle of $pCO_{2}$ measurement is adapted Beer lambert's law and embodied the system using NDIR method. This measuring system was composed of a IR lamp, a optical filter, a optical reaction chamber, pyroelectric sensor and a signal process. We measured $EtCO_{2}'s$ concentration in basis step instead of $pCO_{2}$ gas that can collect by inflicting heat in outer skin. We minimize the size of optical reaction chamber which takes up the largest volume, to make the portable sensor. We made optical reaction chamber in Si wafer using MEMS technology and the optical reaction chamber was shortened to 2 mm and we carried out an experiment. When we injected the $EtCO_{2}$ to the inside of the optical reaction chamber, we could confirm change of 4.6 mV. The system response time was within 2 second that is fairly fast.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.547-551
• /
• 2008

The study aimed to develop a cryopreservation method for long-term storage using mature somatic embryo of Japanese larch. In this study, desiccation treatments significantly affected re-induction rates of embryogenic tissue (ET) from dried somatic embryos. In the effect of different dehydration temperature and duration on the re-initiation ET. the highest frequency was shown when somatic embryos were dehydrated at $25^{\circ}C$ for 2 (45.5%) or 1 day (43.3%), respectively. In addition, low temperatures [$4^{\circ}C$, 2 days (44.2%) or 3 days (43.5%)] were marked higher ET initiation. After that, the initiation value was declined with dehydration duration. For comparison of different relative humidity on re-induction frequency of ET, the best re-induction (43.5%) was obtained from somatic embryos pre-dried at $(NH_4)_2SO_4$ (RH 79%). Both $Na_2HPO_4$ (RH 97%) and $Na_2CO_3$ (RH 88%) treatments were showed the similar rate, 34.6, 34.2%, respectively. However the lowest rate (19.6%) was observed in distilled water (RH 100%). In comparison of the various storage temperatures and duration of the dried somatic embryos, the highest frequency (66.9%) of re-initiation was obtained when somatic embryos were cryopreserved for one day. However, the frequency was gradually decreased as the time length of storage increased regardless of types of storage. None of ET re-initiated when stored at $4^{\circ}C$ for 1, 2 and 84 days.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.751-756
• /
• 2000

The copolymerization of ethylene (E) and cycloolefin (CO) was carried out with rac-Et(Ind)$_2$ZrC $l_2$ and MMAO cocatalyst system to examine the effect of CO structure on catalytic behaviors and properties of copolymer (COC). Various cycloolefins such as norbornene (N), 5-phenyl-2-norbornene (PN) and 5-vinyl-2-norbornene (VN) were used as comonomers. With increasing [CO]/[E] feed ratio, the catalytic activity decreased while the glass transition temperature of copolymer increased. With analysis of the structure of E/VN copolymer by FT-IR and $^{l3}$C-NMR, it was found that the cyclic C=C bond of VN comonomer is selectively polymerized and the vinyl C=C bond remains unreacted. The resulting vinyl C=C bond attached into copolymer provided the functionalization moiety using glycidyl methacrylate.e.

• Microbiology and Biotechnology Letters
• /
• v.38 no.1
• /
• pp.105-111
• /
• 2010

Caesalpinia sappan L. has long been commonly used in oriental folk medicines to treat diseases. To investigate the antibacterial effects from C. sappan L. heart wood, the MeOH soluble extract was successively fractionated by using hexane, $CHC1_3$, EtOAc, BuOH, MeOH, and $H_2O$. Among of these extracts, the EtOAc fraction which partitioned to 3.94% of the highest yields was to be the most active against all human pathogenic bacteria in this experiment. In addition, the antibacterial activities of the EtOAc fraction were more effective against Gram (+) bacteria compared to those against Gram (-) bacteria, which showed difference of the antibacterial activities against Gram (-) bacteria. To confirm the identity of the active substances, the EtOAc fraction was further separated by silica gel adsorption column, high performance liquid chromatography, and 98.48% purity of brazilin (1.67 mg)/EtOAc (10 mg) fraction was obtained from 300 g of C. sappan L. heart wood. The isolated active substance was a single compound of yellow crystalline, and was identified as brazilin ($C_{16}H_{14}O_5$) by MS, and $^lH$-NMR and $^{13}C$-NMR. These results suggest that the brazilin in the EtOAc fraction from MeOH extract of C. sappan L. has a potential as a natural therapeutic agent against human pathogenic Gram (+) bacteria such as Staphylococcus aureus.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.86-91
• /
• 2001

Liquid crystalline (LC) poly(ethylene terephthalate-co-2(3)-chloro-1,4-phenylene terephthalate) [copoly(ET/CPT)] was prepared using poly(ethylene terephthalate) (PET) as a flexible spacer, terephthalic acid (TPA), and chlorohydroquinone diacetate (CHQDA). All reactions involved in the copolymerization were investigated using some model compounds: TAP was used for acidolysis, diphenylethyl terephthalate (DPET) for interchange reaction between PET chains, and 야-o-chlorophenyl terephthalate (DOCT) and di-m-chlorophenyl terephthalate (DMCT) for interchange reaction between PET and rigid rodlike segments. Activation energies obtained for the acidolysis of PET with TPA and for interchange reaction of PET with DPET, DOCT, and DMCT were 19.8 kcal/mol, 26.5 kcal/mole, and 45.9 kcal/mole, respectively. This result supports that the copolymerization proceeds through the acidolysis of PET with TPA first and subsequent polycondensation between carboxyl end group and CHQDA or acetyl end group, which is formed from the reaction of CHQDA and TPA. Also, it was found that ester-interchange reaction can be influenced by the steric hindrance. Copoly(ET/CPT)s obtained has ethylene acetate end groups formed from acetic acid hydroxy ethylene end groups and showed almost the random sequence distribution for all compositions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.707-714
• /
• 2007

The heat transfer coefficient and Pressure drop during gas cooling process of $CO_2$ (R-744) in inclined helical coil copper tubes were investigated experimentally. The main components of the refrigerant loop are a receiver. a variable-speed pump. a mass flow meter, a pre-heater and a inclined helical coil type gas cooler (test section). The test section consists of a smooth copper tube of 2.45mm inner diameter. The refrigerant mass fluxes were varied from 200 to $600[kg/m^2s]$ and the inlet Pressures of gas cooler were 7.5 to 10.0 [MPa]. The heat transfer coefficients of $CO_2$ in the inclined helical coil tubes increases with the increase of mass flux and gas cooling pressure of $CO_2$. The pressure drop of $CO_2$ in the gas cooler shows a relatively good agreement with those Predicted by Ito's correlation developed for single-phase in a helical coil tube. The local heat transfer coefficient of $CO_2$ agrees well with the correlation by Pitla et al. However, at the region near pseudo-critical temperature. the experiments indicate higher values than the Pitla et al. correlation. Therefore. various experiments in the inclined helical coil tubes have to be conducted and it is necessary to develop the reliable and accurate prediction determining the heat transfer and pressure drop of $CO_2$ in the inclined helical coil tubes.