• The Korean Journal of Applied Statistics
• /
• v.27 no.7
• /
• pp.1269-1278
• /
• 2014

Despite the D-optimality criterion becomes very popular in designing an experiment for nonlinear models because of theoretical foundations it provides, it is very critical that the criterion depends on the unknown parameters of the nonlinear model. But some nonlinear models turned out to be partially nonlinear in sense that the optimal design depends on the subset of parameters only. It was a strong belief that the maximin approach to find a robust design to protect against the uncertainty of parameters is not guaranteed to be successful in nonlinear models. But the maximin approach could be a success for the partial nonlinear model, because often the optimal design depends on only one unknown value of parameter, easier to handle than the full parameters. We deal with maximin approach for Michaelis-Menten model with respect to D- and $D_s$-optimality.

• The Korean Journal of Applied Statistics
• /
• v.4 no.2
• /
• pp.171-178
• /
• 1991

For the polynomial spline regression with fixed knots, some properties of the D-optimal design are discussed. Also the D-optimal design for some cases are found analytically by using a normalized B-spline basis for $S(P_m : k : \Delta)$. Based on the Kiefer-Wolfowitz equivalence theorem, the D-optimal design for some cases are found by numerical methods.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.385-394
• /
• 2011

In this study, optimal parameters of diffusion-analogy GIUH were calculated by separating channel and hillslope from drainage structures in the basin. Parameters of the model were composed of channel and hillslope, each velocity($u_c$, $u_h$) and diffusion coefficient($D_c$, $D_h$). Tanbu subwatershed in Bocheong river basin as a target basin was classified as 4th rivers by Strahler's ordering scheme. The optimization technique was applied to the SCE-UA, the estimated optimal parameters are as follows. $u_c$ : 0.589 m/s, $u_h$ : 0.021 m/s, $D_c$ : $34.469m^2/s$, $D_h$ : $0.1333m^2/s$. As a verification for the estimated parameters, the error of average peak flow was about 11 % and the error of peaktime was 0.3 hr. By examining the variability of parameters, the channel diffusion coefficient didn't have significant effect on hydrological response function. by considering these results, the model is expected to be simplified in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.622-624
• /
• 2014

In this letter, the joint mode selection and resource allocation method is proposed for D2D communication underlaying OFDMA based cellular networks. In the proposed scheme, D2D mode possible region is determined which satisfies QoS. Then we solve the optimization problem utilizing primal-dual algorithm. The proposed scheme shows better performance than conventional schemes.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2008

In this study, PHABSIM which is a sample for 1D physical habitat and River2D, which is a sample for 2D physical habitat were applied to the main streams of Han River in order to calculate an optimum flow considering the habitats of fishes in determining the instream flow. Moreover, the Weighted Usable Area (WUA) of the two samples in each growth step (adults and spawning) of the target fish type was compared and reviewed. The optimal flow value was calculated by considering the conditions for inhabiting fishes. As a result of the correlation analysis for WUA from 1D and 2D samples was 0.87 to 0.99. The optimum flow considering the conditions of inhabiting fishes showed insignificant difference of $3m^3/s\;to\;5m^3/s$ with the exception of adults in Moon-Mak and spawning in Dal-Chun.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.437-446
• /
• 2007

In this paper, we numerically induced the optimal values of optical phase conjugator (OPC) position and dispersion coefficients of fiber sections, which can improve the bit error rate (BER) and design the adaptive WDM transmission system, as a function of the extinction ratio (ER) of 10 dB and 20 dB in $16{\times}40$ Gb/s WDM transmission system. It is confirmed that these optimal parameter values for effectively compensating overall WDM channels are dependence on the extinction ratio of signals as well as modulation format, transmitted channel numbers, which were investigated in previous researches. It is also confirmed that ER of 20 dB has the advantage of designing flexible WDM systems using optimal parameters than ER of 10 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.30-37
• /
• 1998

본 논문은 중공형 층상 복합체 멘드릴(mandrel)을 이용하여 기본 공진주파수가 15kHz이상이고, 우수한 감도 특성을 지닌 광섬유 하이드로폰의 최적 구조를 설계하는 것에 관한 것이다. 유한요소법을 이용하여 Al/foraming 및 Nylon/foaming층상 복합체의 공지주 파수를 분석하여 설계 변수의 범위를 결정하였고, 멘드릴 형상에 따른 광음향 감도 특성을 분석하여 최적구조를 결정하였다. 그 결과로 멘드릴의 외경이 감소할수록, 길이가 증가할수 록 감도가 향상되었다. AL 멘드릴의 경우, 내경/외경 비가 낮을수록, Nylon멘드릴의 경우 내경/외경 비가 높을수록 감도 증가를 위하여 효율적이다. 그리고 결정된 최적구조의 Al/foaming 및 Nylon/foaming멘드릴을 사용한 광섬유 하이드로폰의 감도는 각각 1rad./Pa 대비 약 82dB 및 85.7dB 정도 이었고, Al층상 복합체 보다는 Nylon층상 복합체를 이용하는 것이 고 감도의 광섬유 하이드로폰을 제조하는데 유리함을 알 수 있었다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.101-107
• /
• 2011

The optimum weight vector is studied to remove interference and jamming signals in adaptive array antenna system. The optimum weight vector is calculated to apply a minimum variance algorithm and cost function in linearly constrained conditions, and accurately estimates target's signal. Adaptive array antenna system is the system which improves signal to noise ratio(SNR) and decreases interference and jammer power. Adaptive array antenna system delays at tap output of antenna array element. Each tap finally makes the complex signal of one in multiplier complex weight. In order to obtain optimum's weight calculation, optimum weight vector is used in this paper. After simulation, resolution is increased below $3^{\circ}$, and sidelobe is decreased about 10 dB.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.875-887
• /
• 2015

The optimal layout design is used in the development of various areas of industry. In the field of space systems, components must be placed properly in the limited space of spacecraft by considering mechanical, thermal and electrical interfaces. When applying optimal layout design, a proper, even ideal placement of components is possible in the limited space of a satellite platform. Through the optimal placement design, the minimized moment of inertia enhances efficient attitude control, rapid maneuver and mission performance of the satellite. This paper proposes 3D optimal layout design that minimizes the spacecraft's moment of inertia and effect of thermal dissipation between inner components as well as interference between inner components based on a cubic-structure satellite platform. This study proposes the new genetic algorithm for 3D optimal layout design of the satellite platform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2012-2018
• /
• 2001

This paper proposes the adaptive suboptimal iterative algorithm using threshold to reduce system complexity in the PTS\`s. Performance of the proposed adaptive suboptimal iteration algorithm is represented in terms of iteration number and CDF. In the case of the number of sub-block is 4, the 10-3 PAPR of the proposed method and P S improved this by 0.4dB compared to Cimini\`s. And the complexity of the proposed method was reduced to nearly 22% for the PTS\`s and 44% for the Cimini\`s for 8dB threshold. For the 8 sub-blocks, the 10$\^$-3/ PAPR of the proposed method reduced by 0.7dB compared to PTS\`s, but improved by 0.4dB compared to Cimini\`s. And the complexity of the proposed method was reduced to nearly 2.4% for the PTS\`s and 39% for the Cimini\`s.