• 정보와 통신
• /
• 제32권1호
• /
• pp.19-20
• /
• 2014

본고에서는 대표적인 기반SW R&D 프로그램인 SW기초연구센터, SW그랜드챌린지 프로젝트에 대하여 소개하고, 공개SW의 가치와 공개SW R&D 확대 이유에 대하여 소개한다

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.633-641
• /
• 2015

In this study, we proposed a three-dimensional (3D) scanning system based on laser-vision technique and rotary mechanism for automatic 3D model reconstruction. The proposed scanning system consists of a laser projector, a camera, and a turntable. For laser-camera calibration a new and simple method was proposed. 3D point cloud data of the surface of scanned object was fully collected by integrating extracted laser profiles, which were extracted from laser stripe images, corresponding to rotary angles of the rotary mechanism. The obscured laser profile problem was also solved by adding an addition camera at another viewpoint. From collected 3D point cloud data, the 3D model of the scanned object was reconstructed based on facet-representation. The reconstructed 3D models showed effectiveness and the applicability of the proposed 3D scanning system to 3D model-based applications.

• 건설관리
• /
• 제9권6호
• /
• pp.32-33
• /
• 2008

• Elastomers and Composites
• /
• 제19권1호
• /
• pp.32-45
• /
• 1984

• 재활복지공학회논문지
• /
• 제8권2호
• /
• pp.95-99
• /
• 2014

양이간섭은 청신경망에서 청각정보를 처리하는 과정의 하나로, 같은 크기의 소리를 두 귀로 번갈아 자극하여 기록한 청성뇌간유발반응(auditory brainstem responses; ABR)으로 확인할 수 있다. 그러나 소리는 두 귀가 동시에 청취하므로, 양이간섭도 서로 다른 강도의 자극을 두 귀에 동시 자극하여 연구할 필요가 있다. 이 연구 목적은 서로 다른 크기의 소리를 두 귀로 동시에 자극하여 기록한 ABR을 통해 양이간섭치(binaural interaction component; BIC)를 획득하는데 있다. 과거 병력이 없고 청력이 정상인 17.8-22.7세 사이 17명의 여자 대학생이 참여하였다. 소리는 한 귀를 90 dB nHL로 고정하고 반대 쪽 귀를 0부터 80 dB nHL까지 10 dB 단위로 변경시킨 click을 동시에 자극하였다. BI 파형은 양이 동일 강도를 자극한 파형에서 비대칭 자극한 파형을 빼어 구하였다(BI = B - (L + R)). BIC는 BI 파형에서 IV-V 복합파 잠복시간과 진폭으로 하였다. BIC 역치(threshold of BIC; t-BIC)는 자극 강도에 따른 BIC 진폭 변화를 통해 구하였다(대응표본 t-검정). BIC는 자극 음강도 0부터 90 dB nHL까지 10 dB마다 정점 잠복시간 4.65, 4.63, 4.57, 4.58, 4.62, 4.6, 4.48, 4.36, 4.23 ms, 골 잠복시간 5.57, 5.51, 5.51, 5.59, 5.61, 5.55, 5.44, 5.28, 5.19 ms, 진폭 .0.32, -0.3, -0.34, -0.32, -0.42, -0.53, -0.54, -0.61, $-0.67{\mu}V$로, t-BIC는 40 dB nHL(p=.001)로 각각 관찰되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권7호
• /
• pp.945-951
• /
• 2013

In vitro studies were undertaken to develop an appropriate fibrolytic enzymes cocktail comprising of cellulase, xylanase and ${\beta}$-D-glucanase for maize stover with an aim to increase its nutrient utilization in sheep. Cellulase and xylanase added individually to ground maize stover at an increasing dose rates (0, 100, 200, 400, 800, 1,600, 3,200, 6,400, 12,800, 25,600, 32,000, 38,400, and 44,800 IU/g DM), increased (p<0.01) the in vitro dry matter digestibility and in vitro sugar release. The doses selected for studying the combination effect of enzymes were 6,400 to 32,000 IU/g of cellulase and 12,800 to 44,800 IU/g of xylanase. At cellulase concentration of 6,400 IU/g, IVDMD % was higher (p<0.01) at higher xylanase doses (25,600 to 44,800 IU/g). While at cellulase doses (12,800 to 32,000 IU/g), IVDMD % was higher at lower xylanase doses (12,800 and 25,600 IU/g) compared to higher xylanase doses (32,000 to 44,800 IU/g). At cellulase concentration of the 6,400 to 32,000 IU/g, the amount of sugar released increased (p<0.01) with increasing levels of xylanase concentrations except for the concentration of 44,800 IU/g. No effect of ${\beta}$-D-glucanase (100 to 300 IU/g) was observed at lower cellulase-xylanase dose (cellulase-xylanase 12,800 to 12,800 IU/g). Based on the IVDMD, the enzyme combination cellulase-xylanase 12,800 to 12,800 IU/g was selected to study its effect on feed intake and rumen fermentation pattern, conducted on 12 rams (6 to 8 months; $20.34{\pm}2.369$ kg body weight) fed 50% maize stover based TMR. The total volatile fatty acids (p<0.01) and ammonia-N concentration was higher in enzyme supplemented group, while no effect was observed on dry matter intake, ruminal pH and total nitrogen concentration.

• 정보통신설비학회논문지
• /
• 제4권2호
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권2호
• /
• pp.78-85
• /
• 2002

We introduce a rotational decision-directed joint algorithm of blind equalization coupled with carrier recovery for 32-QAM demodulation with high symbol rate. The proposed carrier recovery, which we call a rotational decision-directed carrier recovery(RDDCR), removes the residual phase difference by rotating the decision boundary for the kth received symbol by the frequency detector output of the (k-1)th received symbol. Since the RDDCR includes the function of PLL loop filter by rotating the decision boundary, it gives a simpler demodulator structure. The rotational decision-directed blind equalization(RDDBE) with the rotated decision boundary based on the Stop-and-Go Algorithm(SGA) operated during tracking the frequency offset by the RDDCR and removes intersymbol interference due to multipaths and channel noise. Test results show that symbol error rate of $10^{-3}$ is obtained before the forward error correction when SNR equals 15dB with 150KHz of carrier frequency offset and two multipaths, which is the channel condition for 32-QAM receiver.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1043-1046
• /
• 2009

Human protein tyrosine kinase-6 (PTK6) is a member of the non-receptor protein tyrosine kinase family and it is found in two-thirds of all breast tumors. Very recently, we proposed that the SH3 domain of PTK6 interacts with the linker region (Linker) between the SH2 and kinase domains, proving that the interaction between SH3 domain and Linker plays an important role in auto-inhibition mechanism. Residues from 1 to 191 corresponding region of SH3-SH2-Linker (SH32L) of PTK6 was cloned into the pET32a expression vector with Tobbaco etch virus (TEV) protease enzyme site by sequence homology and 3D structural model. The purified PTK6-SH32L was determined as a monomer conformation in solution. The amide proton resonances in the $^{15}N-^{1}H$ 2D-HSQC spectrum suggest that PTK6-SH32L possesses disordered structural region of the flexible/unstructured linker region. In addition, the backbone amide proton chemical shifts of the SH3 domain in the PTK6-SH32L differ from that of the independent domain, indicating that intra-molecular interaction between SH3 and Linker in the PTK6-SH32L is present.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.20-25
• /
• 2014

Laser heat source was applied on 3D poly urethane model built by 3D printer and cellulous acetate for joining. A diode laser with 808nm wavelength was transmitted through the 3D model and applied on the boundary of ABS/Acetate and 3D poly urethane model. Based on the experimental result, the ABS and 3D built poly-urethane polymers was successfully joined, but the mechanical strength was not enough at the joining boundaries in the range of 6watt to 8watt of laser heat source. However, biodegradable acetate was successfully joined without damaging the 3D built model and mechanical strength was properly achieved. The optimum laser power was found between 5watt and 8watt with scanning speed of 500mm/min, 700mm/min and 1,000mm/min. Based on the SEM analysis the filling mechanism was that the applied pressure on 3D built model squeezed the fluidic thermoplastics, ABS and acetate, into the structure of 3D model. Therefore soundness of joining was strongly depending on the viscosity of thermoplastics in polymers. The developed laser process is expected to increase productivity and minimize the cost for the final products.