• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2125-2128
• /
• 2011

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.42-50
• /
• 2000

Drop size distribution of an air-assisted fuel injector(AAFI) was investigated. Influence of parameters such as ambient air density supply pressure and air-liquid mass ratio(ALR) was examined through both measurement and analysis. The Sauter mean diameter$D_{32}$ varied from 9 to 25$\mu$m throughout all experimental conditions. An empirical correlation for droplet size was obtained. Analytical correlations for predicting $D_{32}$ with respect to operating conditions were also derived through energy consideration and introduction of a simplified model of the from the empirical fitting was adapted to the original equation the proposed correlation in this study matched more closely with measured results. The current correlation exhibited a favorable study matched more closely with measured results. The current correlation exhibited a favorable prediction for $D_{32}$ compared to that by the empirical correlation at selected experimental conditions so that it may be used to predict atomization performance of the AAFI at operating conditions which was not covered in the measurements. After validation the analytical equation was applied to survey the feasible operating conditions for gasoline direct injection application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1976-1988
• /
• 1996

This paper describes TCM(trellis coded modulation) schemes using 32VSB signal for digital CATV system. First we design optimum encoder with code rate 4/5 for 32VSB by using one dimenstional signal constellation and obtain 0.75-4.38 dB coding gains over the existing uncoded 16VSB. Second by using two dimensional signal constellation we design TCM encoders with code rate 9/10, which are better in the power efficienty (0.5-2.27 dB) and the transmission rate(12.5%), and we also design TCM encoders which have more coding gains than one dimensional TCM encoders for the larger number of states(more than 8 states).

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.32.2-32.2
• /
• 2018

We present the structural parameters of ~ 910 dwarf elliptical-like galaxies in the local universe ($z{\lesssim}0.01$) derived from the r-band images of the Sloan Digital SKy Survey (SDSS). We examine the dependence of structural parameters on the morphological types (dS0, dE, dEbc, dSph, and dEblue) and the environment. There is not much difference in the structural parameters among the five subtypes but the mean surface brightness within the effective radius (<${\mu}e$>) of dSph galaxies is clearly different from that of other subtypes. The frequency of disk features such as spiral arm, bar, lens, and rings strongly depends on the morphology of dwarf elliptical-like galaxies with no disk features in dSph galaxies. The absence of disk features and the low surface brightness of dSph galaxies are thought to be closely related to their low mass which leads to different evolution from other subtypes of dwarf elliptical-like galaxies. Density Environments Using IMSNG.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1701-1706
• /
• 2000

In this work a 38 GHz hybrid 2-stage power amplifier module using GaAs pHEMTs and waveguide to microstrip transitions has been successfully developed. A 10 mil thickness duroid substrate was use for fabrication of the power amplifier and the waveguide to microstrip transitions. The fabricated waveguide to microstrip transition showed about 1 dB insertion loss(back to back) at 32-40 GHz. The measured results of power amplifier module showed 29 dBm output power(P1.5dB), 7,2 dB associated gain and 11.2% power-added efficiency(PAE) at 36.8-38.5 GHz.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.112-112
• /
• 2009

레이저 용접은 아크 용접에 비해 상대적으로 빠른 용접과 깊은 용입이 가능하며, 낮은 열입력을 가지는 장점이 있다. 하지만 알루미늄 합금 용접 시 균열 감수성의 증가 및 용접강도가 저하되는 단점을 가지고 있다. 이러한 단점을 극복하는 방법으로 모재의 화학조성을 제어하는 방법과 부가적인 용접와이어를 공급하는 방법이 제안되었으나 레이저 용접에 적용하기 쉽지 않다. 아크 용접과 전자빔 용접에서는 열원에 오실레이션을 적용하여 결정립 구조를 제어하여 용접강도를 증가하는 방법이 제안되었다. 따라서 본 연구에서는 알루미늄 합금 5J32-T4의 용접균열 저감 및 용접강도 향상을 위해 레이저 위빙을 적용하였다. 1mm 두께의 알루미늄 5J32-T4를 사용하였으며, 4kW급 디스크 레이저와 레이저용 스케너를 이용하여 레이저 위빙을 구현하였다. 고온균열을 평가하기 위해 자기구속형 균열 평가방법을 사용하였으며, 용접강도를 평가하기 위해 겹치기 용접을 수행한 시편을 이용하였다. 고온균열 실험결과 레이저 위빙 적용 시 직선 용접에 비해 균열 감수성이 감소한 것을 확인하였다. 전단인장강도 측정결과 레이저 위빙의 적용에 따라 직선 용접에 비해 높은 전단인장강도의 확보가 가능하였다.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.566-570
• /
• 2011

An efficient and general synthesis of bibenzyl derivatives bearing pyranyl rings was achieved by ethylenediamine diacetate-catalyzed reactions of 3,5-dihydroxybibenzyl with ${\alpha},{\beta}$-unsaturated aldehydes in moderate yields. These reactions provided naturally occurring compounds 1 and 2 in single step reaction. As an application of this methodology, biologically interesting natural bauhinol D (8) was synthesized by a convergent sequence from readily available benzaldehyde and benzyl phosphonate.

• Journal of the Chungcheong Mathematical Society
• /
• v.32 no.2
• /
• pp.191-193
• /
• 2019

It is shown that a left Ore extension $D[x;{\sigma}]$ over a division ring D is a left Goldie ring with no zero-divisor and that its left Goldie quotient is an injective hull of $D[x;{\sigma}]$.

• Journal of the Chungcheong Mathematical Society
• /
• v.32 no.1
• /
• pp.53-67
• /
• 2019

The notions of closed elements and dense elements are introduced in BE-algebras. Characterization theorems of closed elements and closed filters are obtained. The notion of dense elements is introduced in BE-algebras. Dense BE-algebras are characterized with the help of maximal filters and congruences. The concept of D-filters is introduced in BE-algebras. A set of equivalent conditions is derived for every D-filter to become a closed filter.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.181-185
• /
• 2017

In this paper, for Broadband Wireles LAN dual-band antenna was designed to satisfy the bandwidth of 2.32GHz and 5.79GHz. the substrate of proposed microstrip antenna is FR-4(er=4.3) and $34mm{\times}50mm{\times}1.5mm$ size and thickness t=0.035mm, and the simulation was used for CST Microwave Studio 2014. input return loss compared -10dB less than operates at and when gain 2.32GHz -19.321dB, 5.79GHz showed the results of -13.033dB. It increased impedance matching, minimized interference between adjacent frequencies, simplified small manufacturing methods, and demonstrated the characteristics of non-directional properties. Thus the proposed antenna satisfied the -10 dB impedancebandwidth requirement while simultaneously covering the Broadband Wireless LAN.