• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.1
• /
• pp.48-54
• /
• 2008

Nine types of staphylococcal enterotoxin (SE) genes (sea~see, seg~sej), 3 types of virulence genes (eta, etb, tst), mecA and 16S rRNA as internal positive control were detected from 187 clinical MRSA (methicillin resistance Staphylococcus aureus) strains isolated from a variety hospitalized patients in Daegu and Gyeongsangbuk-do areas using the multiplex PCR. The frequency of the S. aureus strains harboring recently reported SE genes (seg~sej) were found to be very high (65.9%) and greater than that of the strains harboring classical SE (sea~see) genes (47.8%) as previously established. Taking into account that the newly described pairs form SE genes (i.e., sec+seg+sei, seg+sei) were many, in the other hand, single form SE genes (i.e., seg, seh, sei and sej) were rarely detected. The S. aureus with pairs form enterotoxigenic genes become more potentially toxigenic strains. Furthermore, this work indicated a systematic association between the seg and sei genes and their high incidence among the S, aureus strains, which suggests that these two SE's could be an important phylogenetic link among the staphylococcal enterotoxins.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.43.1-43.1
• /
• 2011

Cu(In,Ga)$Se_2$, $CuInS_2$ 등의 CIS계 화합물 박막 소재를 활용한 태양전지는 높은 광흡수 계수, 상대적으로 높은 변환 효율 및 미래의 잠재적 변환 효율, 화학적 안정성, 도시적인 미관 등의 장점으로 인하여 활발한 연구 및 양산화가 진행 중에 있다. CIGS 박막 태양전지 내에서 광생성된 캐리어들의 재결합 메커니즘을 이해하고 태양에너지의 변환 중 에너지 손실을 더욱 줄이기 위해서는 CIGS 태양전지의 결함 특성에 대한 규명이 중요하며, 이차상의 분리, 셀렌화, Na 확산 등과 같이 CIGS 화합물 박막이 성장하는 동안 일어나는 현상들과 결함발생 사이의 관계에 대한 체계적인 연구가 필수적이다. 특히, CIGS 박막 성장 공정 중 Se flux는 CIGS 막의 성장과 소자의 전기적 파라미터에 영향을 미치므로, Se 조절 및 이에 관련된 결함들을 이해하는 것은 CIGS 박막 태양전지의 전기적 특성을 향상시키는 중요한 열쇠가 된다. 본 연구에서는 3단계 동시증발공정을 이용하여 CIGS 박막 태양전지를 제조 분석하여, 공정 중기판온도 및 Se flux가 CIGS 박막 성장에 미치는 영향을 파악하고자 하였으며, 이를 통한 공정조건 최적화로 CIGS 박막 태양전지의 특성을 향상시키고 고효율을 달성할 수 있음을 확인하였다.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.408-412
• /
• 1998

Thermoelectric properties of Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$(0.05$\leq$x$\leq$0.25) prepared by mechanical alloying and hot pressing, were investigated. Contrary to the p-type behavior of single crystals, the hot-pressed Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$ exhibited ntype conduction without addition of donor dopant. When $Bi_2(Te_{0.85}Se_{0.15})_3$powders were annealed in (50% $H_2$ + 50% Ar) atmosphere, the hot-pressed specimen exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Among the Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$fabricated by mechanical alloying and hot pressing, $Bi_2(Te_{0.85}Se_{0.15})_3$ exhibited a maximum figure-of-merit of 1.92 $\times$ $lO^{-3}$/K.

• Information Systems Review
• /
• v.3 no.2
• /
• pp.369-386
• /
• 2001

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.396-396
• /
• 2009

Chalcopyrite semiconductor $CuInSe_2$ nanoparticles were prepared using a low temperature colloidal route by reacting the starting materials (CuI, $InI_3$ and $Na_2Se$) in solvents. After synthesised $CuInSe_2$ nanoparticles precursors were mixed with organic binder for the viscosity of the precursor slurry to be suitable for the doctor blade method. The mixture of $CuInSe_2$ and binder was deposited onto molybdenum-coated sodalime glass substrates to form thin film. The precursor thin films were preheated on the hot plate to remove remaining solvents and binder material. After subsequent thermal processing of the thin film under a selenium ambient, $CuInSe_2$ absorber layer with grain size significantly lager than that of the nanoparticles was formed.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.40-49
• /
• 1997

$Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ thermoelectric matcrials havc 11et:n fahricxted hy mechanical alloying and hot pressing methods. Microstructure and thermoelectric properties of the hot 11resseii $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ have been investigated Lvith variations of hot pressing temperature and dopmt atltiition Formation of $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ alloy powders was completed by mechanical alloying of the as-mixed Ri. Te, arid Sc grmules of ~3.6mm size for 3 hours at ball-to-material weight ratio of 5 : 1. Figure of merit of $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ was markedly incrcwieti hy hot pressing at temperatures above $450^{\circ}C$, and value of $1.9{\times}10^{-3}/K$ was obtained for the specimen hot pressed at $550^{\circ}C$. With addition of 0.015 wt% Ri as acceptor dopant, figure of merit ol $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ hot pressed $550^{\circ}C$$2.1{\times}10^{-3}/K$.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.349-354
• /
• 1999

The temperature dependences of the Hall coefficient, carrier mobility, electrical resistivity, Seebeck coefficient, thermal conductivity, and figure-of-merit of the undoped and $CdI_2$-doped 90% $Bi_2Te_3-10% Bi_2Se_3$, single crystals, grown by the Bridgman method, have been characterized at temperatures ranging from 77K to 600K. The saturated carrier concentration and degenerate temperature of the undoped 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal are $5.85\times10_{18}cm^{-3}$ and 127K, respectively. The scattering parameter of the 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal is determined to b -0.23, and the electron mobility to hole mobility ratio ($\mu_e/\mu_h)$ is 1.45. The bandgap energy at 0K of the 90% <$Bi_2Te_3-10% Bi_2Se_3$ single crystal is 0.200 eV. Adding $CdI_2$as a donor dopant, a maximum figure-of-merit of $3.2\times10^{-3}/K$$CdI_2$-doped specimen.

• Journal of Powder Materials
• /
• v.12 no.4 s.51
• /
• pp.291-295
• /
• 2005

CdSe hollow sphere with average size of about 30-50 nm was synthesized from the mixed solution of cadmium chloride $(CdCl_2)$, sodium selenosulfate $(Na_2SeSO_3)$ and ethylenediamine(EDA, $H_2NCH_2CH_2NH_2$) at room temperature. The molar ratio of EDA to $Cd^{2+}$ showed the most significant effect on the morphology of CdSe hollow sphere. This paper will present and discuss the possible formation mechanism of CdSe hollow sphere based on the observation of morphological changes.

• Bulletin of the Korean Space Science Society
• /
• 2009.04a
• /
• pp.56.3-56.3
• /
• 2009

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.88-88
• /
• 2005