• Applied Biological Chemistry
• /
• v.6
• /
• pp.57-59
• /
• 1965

According to the result of the observations on the effect of the reagents, $CuSO_4{\cdot}5H_2O$, $ZnSO_4{\cdot}7H_2O$ $MnSO_4{\cdot}4H_2O$, $HgCl_2$, upon the mycelial growth of psalliota campestris $HgCl_2$ showed the strongest effect on checking the mycelial growth $(,.008{\sim}0.01%)$ $CuSO_4{\cdot}5H_2O(0.030%)$, $ZnSO_4{\cdot}7H_2O(0.080%)$, came next and the $MnSO_4{\cdot}4H_2O(0.100%)$ was the weakest. Writer also found that showed the promoting effect of the mycelial growth in appropriate Concentration (at $0.015%\;CuSO_4{\cdot}5H_2O$, $0.030%ZnSO_4{\cdot}7H_2O$).

• KSBB Journal
• /
• v.5 no.1
• /
• pp.81-85
• /
• 1990

Lignin was extracted from the rice straw by using the solvent mixture of buthyl alcohol and distilled water. And the experiment of vanillin production from extracted lignin was performed with the oxidation catalysts; CuO, Cu(OH)2 and CuSO4.5H2O. The optimum conditions of lignin extraction are the reaction temperature 12$0^{\circ}C$ and the mixture of 250mL buthyloloohol, 250mL, distilled water and 25g rice straw in the presence of 2.5g p-toluenesulfonic acid. The yield of vanillin from extracted lignin increased linearly with the increase of reaction temperature. And it increased with the order of Cu(OH)<$_2$ CuO$_4\cdot \;5H_2$Oas oxidation catalysts. The maximum yield of vanillin was 9% in the presence of 2.5%(w/v) CuSO$_4\cdot \;5H_2$O under the following conditions: temperature, 18$0^{\circ}C$; pressure, 13atm; pH 4.0 and reaction time, two hours.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.675-678
• /
• 2004

[ $CuAlO_2$ ] was used as P-type transparent conducting oxide. $CuAlO_2$ ceramics was obtained from heating a stoichiometric mixture of $Cu_2O$ and $Al_2OH_3$ at $1200^{\circ}C$ for 6h. $CuAlO_2$ ceramics were doped by the rate of 0, 5, 7 and 10% of the $BeSO_4{\cdot}4H_2O$. Sintered ceramics were investigated by X-ray diffraction (XRD) and electrical measurements. The room temperature conductivity of the ceramics, which were doped with $BeSO_4{\cdot}4H_2O$ 5wt% was of the order of $3.19\times10^{-3}S\;cm^{-1}$, and the density was $4.98g/cm^3$. Therefor the conductivity and density in $BeSO+4{\cdot}4H_2O$ 5wt% were better than other cases. Additionally, Seebeck cofficient measurements revealed that these ceramics were p-type semiconductors and the ceramic conductivity increased with the growth temperature.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.359-363
• /
• 1987

Sonic waves (50KHz) was accelerated the oxidation reaction of primary, benzyl and secondary alcohol with $BaMnO_4\;and\;KMnO_4-CuSO_4{\cdot}5H_2O$ to give the corresponding aldehyde and ketone at $30^{\circ}C/1$ atm. in high yields compared to stirring or refluxing condition.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.211-216
• /
• 2003

The $Cu[SO_3(CH_2)_4SO_3$］ㆍ$4H_2O$ compound was synthesized. The three-dimensional structure of $Cu[SO_3(CH_2)_4SO_3$］ㆍ$4H_2O$ compound was determined. The copper atom is bridged by 4 oxygen atoms of 4 water molecules and 2 oxygen atoms of butanedisulfonate. The butyl chain in the plane of four copper atoms is oriented parallel and perpendicular to the one of plane axis, alternatively. Magnetic data indicate that this compound behaves a typical paramagnetic.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.389-395
• /
• 2000

A natural colorants was extracted from cherry by 10wt% aqueous acetic acid solution as an extractant. Silk and cotton fabrics were dyed with the cherry extract in the temperature range of $40-80^\circ{C}$ and for the time range of 30-60min. by pre- and post-mordanting with various mordants, their dyeability and fastness were investigated. The natural cherry extract prepared in this study has a maximum absorbance at 520nm. It was found that the optimum dyeing temperature and time were $40^\circ{C}$ and 50min, respectively. The pre-mordanting method was more effective than post-mordanting. All mordants except $SnCl_2\cdot{2H}_2O\;and\;FeSO_4\cdot{7H}_2O$ were effective for silk fabrics. However, the dyeability on cotton fabrics increased in the order of $CrK(SO_4)_2\cdot{12H_2O>(CH_3COO)_2Cu\cdot{H}_2O>CuSO_4\cdot{5H}_2O>AlK(SO_4)_2\cdot{12H}_2O>FeSO_4\cdot{7H}_2O>SnCl_2\cdot{2H}_2O$ among the mordants used in this study Fastness(light, water, washing, perpspiration fastness) on the silk and cotton fabrics increased with using mordants. The post-mordanting using mordant$(CH_3COO)_2Cu\cdot{H}_2O$ among the various mordants in this study gave the best fastness.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.529-539
• /
• 2019

In this study, heavy metal removal and precipitation characteristics with pH change were studied for artificial acid mine drainage. Artificial acid mine drainage was prepared using sulfates of iron, aluminum, copper, zinc, manganese which contained in acid mine drainage from abandoned mines. The single and mixed five heavy metal samples of Fe, Al, Cu, Zn, and Mn were prepared at initial concentrations of 30 and 70 mg/L. Fe and Al were mostly removed at pH 4.0 and 5.0, respectively, and other heavy metals gradually decreased with increasing pH. Concentration changes with increasing pH show generally similar trend for single and mixed heavy metal samples. The effect of removing heavy metals from aqueous solutions is not related to the initial concentration and depends on the pH change. XRD were used for mineral identification of precipitates and crystallinity of the mineral tended to increase with increasing pH. The precipitates that produced by decreasing the concentration of heavy metals in the aqueous solution composed of Fe-goethite(FeOOH), Al-basaluminite(Al₄(SO₄)(OH)₁₀·4H₂O), Cu-connellite(Cu₁₉(OH)₃₂(SO₄)Cl₄·3H₂O) and tenorite(CuO), Zn-zincite(ZnO), and Mn-hausmannite(Mn₃O₄).

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.661-665
• /
• 2013

We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.341-346
• /
• 1998

2-Pyridinecarboxaldehyde thiocarbohydrazone(PyTC) have been reacted with $Cu^{2+}$ to form $[Cu(PyTC)H_2O)]SO_4$. This complex is soluble in water and polar organic solvents. The complex has been characterized by elemental analysis, conductivity, effective magnetic moment, and spectroscopic data. From the results the complex is square planar. The colorimetric determination of Cu(II) ion by using PyTC as a ligand was studied. The solution of copper(II) with PyTC was obeyed Beer's law in concentration up to $2.9{\times}10^{-4}M$ at pH 4.