• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2273-2279
• /
• 2012

동시진공증발법(co-evaporation)으로 Cu(In,Ga)$Se_2$ 박막을 제작하는 논문으로서 1단계($1^{st}$-stage)에서 기판온도(substrate temperature)가 $400^{\circ}C$에서 $In_2Se_3$상($In_2Se_3$ phase)이 존재하였으며 2,3단계($2^{nd}$-stage, $3^{rd}$-stage)에서 기판온도 변화에 따른 흡수 스펙트럼(absorbency spectrum)은 차이가 크지 않다. 이것은 박막의 두께가 전부 $1{\mu}m$ 이상이므로 흡수 스펙트럼(absorbency spectrum)은 거의 차이가 없다. 2,3단계에서 기판온도 변화에 따른 SEM과 XRD를 분석한 결과, 기판온도가 증가할수록 결정구조(crystal structure)의 밀도(density)가 증가하고 기공(vacancy)이 감소하며 $480^{\circ}C$, $500^{\circ}C$에서 Cu(In0.7Ga0.3)$Se_2$상(${\mu}m$)이 형성되었다.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.888-893
• /
• 2013

In this paper, we prepared $Cu(In,Ga)Se_2$ thin films by using co-evaporation method, and analyzed the properties of the thin films. During the thin film preparation process, we confirmed $InGaSe_2$ phase was formed at $400^{\circ}C$ in first stage, and also confirmed the thin films showed the vacancy decrease. In second and third stage, we confirmed the density increase of crystalline structure at over $480^{\circ}C$ and the formation of $Cu(In_{0.7}Ga_{0.3})Se_2$ phase. As the result of SEM and XRD analysis of the films which were before and after heat-treated, we confirmed the disappearance of $Cu_2Se_2$ and the formation of $Cu(In_{0.7}Ga_{0.3})Se_2$ single phase after the heat-treatment, We, therefore, confirmed the heat-treatment did not affect the absorbency spectra of the thin films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1584-1586
• /
• 2002

CuIn$Se_2$ (CIS) and related compounds such as Cu($In_xGa_{1-x})Se_2$(CIGS) have been studied by their potential for use in photovoltaic devices. CIS thin film materials which have high absorption coefficient and wide bandgap, have attracted much attention as an alternative to crystalline and amorphous silicon solar cells currently in use. Cu-rich CIGS film have very low resistivity, due to coexistence of the semimetallic $Cu_{2-x}Se$. In-rich CIGS films show high resistivity, since these films are compensated films without the $Cu_{2-x}Se$ phase. Optical properties of the CIGS films also change in accordance with the resistivity for the Cu/(In+Ga) ratio. The Cu-rich films have different spectra from In-rich films in near infrared wavelengths.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.461-467
• /
• 2011

Cu(In, Ga)$Se_2$ (CIGS) precursor films were electrodeposited on Mo/glass substrates in acidic solutions containing $Cu^{2+}$, $In^{3+}$, $Ga^{3+}$, and $Se^{4+}$ ions at -0.6 V (SCE) and pH. 1.8. In order to induce recrystallization, the electrodeposited $Cu_{1.00}In_{0.81}Ga_{0.09}Se_{2.08}$ (25.0 at.% Cu + 20.2 at.% In + 2.2 at.% Ga + 52.0 at.% Se) precursor films were annealed under a high Se gas atmosphere for 15, 30, 45, and 60 min, respectively, at $500^{\circ}C$. The Se amount in the film increased from 52 at.% to 62 at.%, whereas the In amount in the film decreased from 20.8 at.% to 9.1 at.% as the annealing time increased from 0 (asdeposited state) to 60 min. These results were attributed to the Se introduced from the furnace atmosphere and reacted with the In present in the precursor films, resulting in the formation of the volatile $In_2Se$. CIGS precursor grains with a cauliflower shape grew as larger grains with the $CuSe_2$ and/or $Cu_{2-x}Se$ faceted phases as the annealing times increased. These faceted phases resulted in rough surface morphologies of the CIGS films. Furthermore, the CIGS layers were not dense because the empty spaces between the grains were not removed via annealing. Uniform thicknesses of the $MoSe_2$ layers occurred at the 45 and 60 min annealing time. This implies that there was a stable reaction between the Mo back electrode and the Se diffused through the CIGS film. The results obtained in the present research were sufficiently different from comparable studies where the recrystallization annealing was performed under an atmosphere of Ar gas only or a low Se gas pressure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.383-386
• /
• 2002

Polycrystalline Cu(In,Ga)Se$_2$(CIGS) thin-films were grown by co-evaporation on a soda lime glass substrate. In this paper the effects of the Se evaporation temperature on the properties of CuIn0.75Ga0.25Se2 (CIGS) thin films. Structure, surface morphology and optical properties of CIGS thin films deposited at various Se evaporation temperatures have been investigated using a number of analysis techniques. X-ray diffraction (XRD) analysis shows that CIGS films exhibit a strong <112> preferred orientation. As expected, at higher Se evaporation temperatures the films displayed a lower degree of crystallinity. The <112> peak was also enhanced and other CIGS peaks appeared simultaneously. These results were supported by experimental work using scanning electron microscopy When the Se evaporation temperature was increased, the average grain size also decreased together with a reduction Cu content. The Se evaporation temperature also had a significant inf1uence on the transmission spectra. Increasing the Se evaporation temperature, the cell efficiency was improved dramatically to 11.75% with Voc = 556 mV, Jsc = 32.17 mA/cm2 and FF = 0.66. The Se evaporation temperature is an important parameter in thin film deposition regardless of the deposition technique being used to deposit thin films

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.27-31
• /
• 2015

It is known that sulfide at the $Cu(In,Ga)Se_2$ ($CIGSe_2$) surface plays a positive role in $CIGSe_2$ solar cells. We investigated the substitution of S with Se on the $CIGSe_2$ surface in S atmosphere. We observed that the sulfur content in the $CIGSe_2$ films changed according to sulfurization temperature and Cu/(In+Ga) ratio. The sulfur content in the $CIGSe_2$ films increased with increasing the annealing temperature and Cu/(In+Ga) ratio. Also Cu migration toward the surface increased at higher temperature. Since high Cu concentration at the $CIGSe_2$ surface is detrimental role, it is necessary to reduce the S annealing temperature as low as $200^{\circ}C$. The cell performance was improved at $200^{\circ}C$ sulfurization.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.588-591
• /
• 1995

Single crystals of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) were grown by chemical vapor transport technique. Powdered polycrystalline samples of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) were also prepared by the direct combination of the elements. The chemical composition of these single crystals was determined by comparing their lattice parameters with those of the standard polycrystalline samples. The IR transmission range of single crystals of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) is slightly narrower than that observed for pure ZnSe. However, these materials still show good transmission in the long-wavelength IR range. The addition of small amounts of CuMSe2 (M=Al, Ga, or In) considerably increases the hardness of ZnSe.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.375-375
• /
• 2011

Cu(In1-xGax)Se2 (CIGS)박막증착법 중 금속 전구체의 셀렌화 공정법은 다른 제조 방법에 비해 대면적 생산에 유리하고, 비교적 공정 과정이 간단하다는 장점이 있다. 이 제조 방법은 금속 전구체를 만든 후에 셀렌화 공정을 하게 된다. 셀렌화 공정은 대부분 H2Se 가스를 사용하지만 유독성으로 사용하는데 주의해야 한다. 본 실험은 H2Se를 사용하지 않고 Se원료를 주입하기 위해 Se cracker를 사용했고 금속 전구체 증착과 셀렌화를 동시에 하는 반응성 스퍼터링 후 열처리 법을 이용하여 CIGS 박막을 증착 했다. CIGS의 박막의 Cu/[In+Ga], Ga/[In+Ga]비를 변화시켜 특성변화를 관찰했다. Cu/[In+Ga]비가 감소할수록 CIGS의 결정방향인 (112) 이 우세하게 발달했고 Ga/[In+Ga]비가 증가할수록 CIGS의 결정면 사이의 값이 작아지기 때문에 CIGS peak의 2-Theta 값이 증가하게 된다. CIGS 박막 태양전지의 구조는 Al/Ni/ITO/i-ZnO/CdS/CIGS/Mo/glass 제작했다. CIGS박막의 조성비가 Cu/[In+Ga]=0.84, Ga/[In+Ga]=0.24인 박막태양전지에서 개방전압 0.48 V, 단락전류밀도 33.54 mA/cm2, 충실도 54.20% 그리고 변환효율 8.63%를 얻었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.361-361
• /
• 2011

Cu(InGa)(SeS2) (CIGS) thin film solar cells have recently reached an efficiency of 20%. Recent studies suggest a double graded band gap structure of the CIGS absorber layer to be a key issue in the production of high efficiency thin film solar cell using by sputtering process method. In this study, Cu(InGa)(SeS2) absorbers were manufactured by selenization and surfulization, we have deposited CIG precusor by sputtering and Se layer by evaporation before selenization. The objective of this study is to find out surfulization effects to improve Voc and to compare with non-surfulization Cu(InGa)Se2 absorbers. Even if we didn't analysis Ga depth profile of Cu(InGa)(SeS2) absorbers, we confirmed increasing of Eg and Voc through surlization process. In non-surfulization Cu(InGa)Se2 absorbers, Eg and Voc are 0.96eV and 0.48V. Whereas Eg and Voc of Cu(InGa)(SeS2) absorbers are 1.16eV and 0.57V. And the efficiency of 9.58% was achieved on 0.57cm2 sized SLG substrate. In this study, we will be discussed to improve Eg and Voc through surfulization and the other method without H2S. gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1587-1589
• /
• 2002

Photovoltaics is considered as one of the most promising new energy technology, because its energy source is omni present, pollution-free and inexhaustive. It is agreed that these solar cells must be thin film type because thin film process is cost-efficive in the fact that it uses much less raw materials and can be continuous. The defect chalcopyrite material $CuIn_3Se_5$ has been identified as playing an essential role in efficient photovoltaic action in $CuInSe_2$-based devicesm It has been reported to be of n-type conductivity, forming a p-n junction with its p-type counterpart CuInSe2. Because the most efficient cells consist of the $Cu(In,Ga)Se_2$ quarternary, knowledge of some physical properties of the Ga-containing defect chalcopyrite $Cu(In,Ga)_3Se_5$ may help us better understand the junction phenomena in such devices.