• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.374-374
• /
• 2011

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 일반적으로 Soda lime glass/Mo/CIGS/CdS/ZnO/ITO/Al의 구조로 제작된다. 태양전지는 p형과 n형 반도체의 접합에 의해서 동작을 하게 되며, CIGS 박막 태양전지에서는 p형으로 CIGS 박막과 n형으로 CdS 박막이 사용된다. CIGS 박막태양전지에서는 p형과 n형이 서로 다른 물질로 이루어진 이종접합을 이루게 되고, 계면에서의 밴드가 어떻게 형성이 되느냐에 따라 태양전지 성능에 영향을 미치게 된다. p형의 CIGS 박막은 주로 다단계 증발법에 의해 형성되고 3단계 공정조건에 의해 계면의 특성에 많은 영향을 미치게 된다. n형의 CdS 박막은 주로 chemical bath deposition (CBD) 법에 의해 제작된다. 이렇게 제작되는 CBD-CdS는 시약의 농도, pH (수소이온농도), 박막 형성시의 온도 등의 조건에 따라 특성이 변하게 된다. 본 논문에서는 3단계 공정시간을 변화시켜 제작된 CIGS 박막 위에 CBD-CdS 증착 조건 중 thiourea 의 농도를 변화시켜 CIGS 태양전지를 제작하고 그에 따른 특성을 살펴보았다. CIGS 박막은 3단계 공정시간을 490초와 360초로 하여 제작하였고, CdS 박막은 thiourea 농도를 각각 0.025 M과 0.05 M, 0.074 M, 0.1 M로 변화시켜가며 제작하였다. 제작된 CIGS 박막 태양전지는 CIGS 3단계 공정시간과 thiourea의 조건에 따라 최고 15.81%, 최저 14.13%로 나타내었다. 또한, 외부양자효율을 측정하여 제작된 CIGS 박막 태양전지의 파장에 따른 특성을 비교하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1564-1567
• /
• 2009

Cu(In,Ga)$Se_2$ (CIGS) thin films were formed using CIGS bulk by electron-beam evaporation method with an evaporation current from 20 mA to 90 mA. The experimental results showed that the chemical compositions and the properties of CIGS films varied with the different evaporation current. The Cu-rich CIGS film was deposited successfully with a band gap of 1.20 eV when the evaporation current was 90 mA.

• Korean Journal of Materials Research
• /
• v.19 no.8
• /
• pp.452-456
• /
• 2009

In high-efficiency Cu(In,Ga)$Se_2$ solar cells, Na is doped into a Cu(In,Ga)$Se_2$ light-absorbing layer from sodalime-glass substrate through Mo back-contact layer, resulting in an increase of device performance. However, this supply of sodium is limited when the process temperature is too low or when a substrate does not supply Na. This limitation can be overcome by supplying Na through external doping. For Na doping, an NaF interlayer was deposited on Mo/glass substrate. A Cu(In,Ga)$Se_2$ absorber layer was deposited on the NaF interlayer by a three-stage co-evaporation process As the thickness of NaF interlayer increased, smaller grain sizes were obtained. The resistivity of the NaF-doped CIGS film was of the order of $10^3{\Omega}{\cdot}cm$ indicating that doping was not very effective. However, highest conversion efficiency of 14.2% was obtained when the NaF thickness was 25 nm, suggesting that Na doping using an NaF interlayer is one of the possible methods for external doping.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1625-1627
• /
• 2000

Cu(InGa)$Se_2$(CIGS) thin film absorbers with various Cu/(In+Ga) atomic ratios were prepared by a three-stage process using a co-evaporation appartus. The effect of Na on the structural and electrical properties of CIGS films were studied and their effects on the CIGS/Mo thin film solar cells were investigated. Soda-lime glass and Corning glass were used as substrates to compare the effect of Na diffusion into CIGS film. The resistivity of CIGS films was not changed in the Cu-poor lesion due to diffusion of Na from soda-lime glass but was mainly determined by the surface resistivity controlled by excess Na.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.182-183
• /
• 2006

$CuInSe_2$ single crystal thin films was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;1.1851\;eV\;-\;(8.99\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;153K)$. After the as-grown $CuInSe_2$ single crystal thin films was annealed in Cu-, Se-, and In-atmospheres, the origin of point defects of $CuInSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.244-252
• /
• 2004

A stoichiometric mixture of evaporating materials for $CuInSe_2$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $_CuInSe2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $620^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuInSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $9.62\times10^{16}/\textrm{cm}^3$, 296 $\textrm{cm}^2$/Vㆍs at 293 K, respectively. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 1.1851 eV -($8.99\times10^{-4} eV/K)T^2$(T + 153 K). The crystal field and the spin-orbit splitting energies for the valence band of the CuInSe$_2$ have been estimated to be 0.0087 eV and 0.2329 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the Δso definitely exists in the $\Gamma$6 states of the valence band of the $CuInSe_2$. The three photocurrent peaks observed at 10 K are ascribed to the $A_1-, B_1$-와 $C_1$-exciton peaks for n = 1.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.65-70
• /
• 2015

We applied KF on CIGS film to modify CIGS surface with a wider-bandgap surface layer. With the KF deposition the surface of CIGS film had fine particle on the CIGS surface at 350 and $300^{\circ}C$. No fine particle was detected at 500 and $250^{\circ}C$. With the KF treatment, the Ga and O content increased at the surface, while the In and Cu content decreased. The valence band maximum was lowered with KF treatment. The composition profile and band structure were positive side of applying KF on the CIGS surface. However, the efficiency decreased with the KF treatment due to high series resistance, probably due to too thick surface layer. A smaller amount of KF should be supplied and more systematic analysis is necessary to obtain a reproducible higher efficiency CIGS solar cells.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1129-1134
• /
• 2015

In this article, a study of a flower like nanostructured CdS buffer layer for improving the performance of a submicron-thick $CuIn_{1-x}Ga_xSe_2$ (CIGS) solar cell (SC) is presented. Both its synthesis and properties are discussed in detail. The surface reflectance of the device is dramatically decreased. SCs with flower like nanostructured CdS buffer layers enhance short-circuit current density, fill factor, and open-circuit voltage. These enhancements contribute to an increase in power conversion efficiency of about 55% on average compared to SCs that don't have a flower like nanostructured CdS buffer layer, despite them both having the same CIGS light absorbing layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.109-112
• /
• 2005

Cu계$I-III-VI_2$화합물은 직접천이형 반도체로 광흡수계수가 매우 높아 박막형 태양전지 제조에 매우 유리하다 또한 화학적으로 안정하며 Ga, A1등을 첨가하면 에너지 금지대폭을 조절할 수 있어 Wide Bandgap 태양전지 및 탠덤구조 태양전지를 제조하기에도 용이하다. $CuInSe_2(CIS)$ 물질에서 In을 $20-30\%$ 정도 치환한 $Cu(In,\;Ga)Se_2(CIGS)$ 태양전지의 경우 $19.5\%$의 세계 최고 효율을 보고하고 있으며 이는 다결정 실리콘 태양전지의 효율과 비슷한 수준이다. 본 연구에서는 동시 진공증발법을 이용하여 증착한 CIGS 박막 및 $CuGaSe_2(CGS)$ 박막을 이용하여 태양전지를 제조하였다. 공정의 재현성 및 결정립계가 큰 광흡수층 제조를 위하여 실시간 기판 온도 모니터링 시스템을 도입하였으며 버퍼층으로는 용액성장한 CdS 박막을 사용하였다. SLG/MO/CIGS(CGS)/CdS/ZnO/Al구조의 태양전지를 제조하여 면적 $0.5cm^2$에서 각각 $15\%$(CIGS)와 $7\%(CGS)$의 효율을 얻었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.99.1-99.1
• /
• 2010

Many efforts on the surface sulfurization of $Cu(InGa)Se_2$ (CIGS)thin films have been reported as techniques to improve CIGS solar cell performance. We have investigated the sulfurization technique using the sulfur vapor. The co-evaporated $Cu(In,Ga)Se_2$ tin film was used for sulfurization. A thin $Cu(In,Ga)(S,Se)_2$ layer was grown on the surface of the CIGS thin film after high-temperature annealing in sulfur vapor. The structural and compositional properties of the thin films were studied by XRD, EDS and AES analysis. The obtained results revealed that the surface modification technique is promising method to S incorporated into CIGS absorber.