• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1148-1155
• /
• 2020

Objective: The objective was to determine standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in cereal grains and various co-products fed to growing pigs. Methods: Ten feed ingredients tested were barley (9.3% CP), lupin kernels (31.1% CP), and wheat (11.3% CP) as cereal grains, and 2 sources of corn gluten feed produced in China (21.6% CP) and Korea (24.6% CP), corn gluten meal (65.3% CP), lupin hulls (11.6% CP), rice bran (14.5% CP), soybean meal (44.8% CP), and wheat bran (15.4% CP) as co-products. Ten experimental diets were formulated to contain each ingredient as a sole source of N and an N-free diet was used to correct basal endogenous losses of CP and AA. All diets also contained 0.5% Cr₂O₃ as an indigestible index. A replicated 11×6 incomplete Latin square design with 11 dietary treatments, 6 periods, and 22 animals was employed. Twenty-two barrows with an initial body weight of 64.6±4.9 kg were equipped with a T-cannula in the distal ileum. An experimental period consisted of a 4-d adaptation period and a 2-d collection period. Results: The SID of CP in the barley, lupin kernels, wheat, 2 sources of corn gluten feed, corn gluten meal, lupin hulls, rice bran, soybean meal, and wheat bran were 84.7%, 90.5%, 90.4%, 77.4%, 74.6%, 89.5%, 90.4%, 74.4%, 86.9%, and 63.4% (standard error of the mean [SEM] = 5.3, p = 0.006), respectively. The respective SID values of Lys were 75.5%, 88.4%, 83.9%, 74.7%, 62.4%, 80.3%, 83.9%, 78.5%, 88.0%, and 71.2% (SEM = 3.3, p<0.001), and the SID values of Met were 83.6%, 88.7%, 89.4%, 85.7%, 78.3%, 88.9%, 89.4%, 85.3%, 91.1%, and 77.0% (SEM = 2.4, p<0.001), respectively. Conclusion: The ileal digestibility of protein and amino acids varies among the feed ingredients fed to pigs.

• Corrosion Science and Technology
• /
• 제9권3호
• /
• pp.122-128
• /
• 2010

The corrosion of the flexible tube in the automobile exhaust system is caused by the ambient water and chloride ions. Since welding is one of the key processes for the flexible tube manufacturing, it is required to select a proper welding method to prevent the flexible tube corrosion and to increase its lifetime. There are many studies about the efficiency of the welding method, but no systematic study is performed for the effect of welding method on the corrosion property of the austenitic stainless weldment. The aim of the present study is to provide information on the effect of two different welding methods of TIGW (tungsten inert gas welding) and PAW (plasma arc welding) on the corrosion property of austenitic stainless steel weldment. Materials used in this study were two types of the commercial austenitic stainless steel, STS321 and XM15J1, which were used for flexible tube material for the automotive exhaust system. Microstructure was observed by using optical microscopy (OM) and scanning electron microscopy (SEM). To evaluate the corrosion behavior, potentiodynamic and potentiostatic tests were performed. The chemical state of the passive film was analyzed in terms of XPS depth profile. Metallurgical analysis show that the ferrite content in fusion zone of both STS321 and XM15J1 is higher when welded by PAW than by TIGW. The potentiodynamic and potentiostatic test results show that both STS321 and XM15J1 have higher transpassive potential and lower passive current density when welded by PAW than by TIGW. XPS analysis indicates that the stable $Cr_2O_3$ layer at the outermost layer of the passive film is formed when welded by PAW. The result recommends that PAW is more desirable than TIGW to secure corrosion resistance of the flex tube which is usually made of austenitic stainless steel.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.240-246
• /
• 2016

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.175-178
• /
• 2004

The stochiometric mixture of evaporating materials for the $ZnIn_2S_4$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_2S_4$ single crystal thin film, $ZnIn_2S_4$ mixed crystal was deposited on throughly etched semi-insulating GaAs(100) in the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_2S_4$ sing1e crystal thin film was about $0.5\;{\mu}m/hr$. The crystalline structure of $ZnIn_2S_4$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $ZnIn_2S_4$ single crystal thin film measured from Hall effect by van der Pauw method are $8.51{\times}10^{17}\;cm^{-3}$, $291\;cm^2/V{\cdot}s$ at $293_{\circ}\;K$, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $ZnIn_2S_4$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_O$ and the crystal field splitting ${\Delta}Cr$ were 0.0148 eV and 0.1678 eV at $10_{\circ}\; K$, respectively. From the photoluminescence measurement of $ZnIn_2S_4$ single crystal thin film, we observed free excition $(E_X)$ typically observed only in high quality crystal and neutral donor bound exciton $(D^{o},X)$ having very strong peak intensity The full width at half maximum and binding energy of neutral donor bound excition were 9 meV and 26 meV, respectively, The activation energy of impurity measured by Haynes rule was 130 meV.

• Journal of Veterinary Science
• /
• 제22권6호
• /
• pp.78.1-78.10
• /
• 2021

Background: Recurrent subclinical mastitis (RScM) due to resistant bacteria has low clinical and bacteriological cure rates, often requiring the culling of cows. The sequential intramammary administration of enrofloxacin hydrochloride-dihydrate (enro-C) followed by ceftiofur HCl may be useful for treating these cases. Objectives: This study assessed the bacteriological and clinical cure-efficacies of the sequentially intramammary administration of enro-C, followed by ceftiofur HCl to treat RScM in Holstein/Friesian cows. Methods: This trial was conducted in a herd with a high prevalence of RScM, and 20 Holstein/Friesian cows were included: 45% suffering subclinical mastitis and 38.9% of the mammary quarters affected. Twenty-nine bacterial isolates in vitro resistant to enro-C were obtained (coagulase-negative Staphylococcus spp, 55.2%; Staphylococcus aureus, 27.6%; Escherichia coli, 6.9%; Streptococcus uberis, 6.9%; Corynebacterium bovis, 3.4%). Polymerase chain reaction-isolated the following genes linked to enro-C resistance: chromosomal (gyrA) and plasmid (aac(6')-lb-cr). The treatments were as follows: twice-daily intramammary infusions of enro-C (300 mg/10 mL) for 5 days. Cows clinically considered treatment failures were also treated with intramammary ceftiofur (125 mg/10 mL, twice daily for 5 days. The clinical and bacteriological cure rates were carried out when completing each treatment phase and at 14 and 21 days, aided by a California mastitis test, somatic cell count, and failure to identify the initially causative bacteria. Results: Enro-C achieved 65% clinical and bacteriological cure rates, and 100% cure rates were obtained after the rescue treatment with ceftiofur HCl. Conclusions: Outstanding clinical and bacteriological cure rates in cows affected by RScM were achieved with the consecutive intramammary infusions of enro-C, followed by ceftiofur HCl.

• 생명과학회지
• /
• 제24권4호
• /
• pp.403-410
• /
• 2014

유기농산물인증과 무농약농산물인증 지역의 논토양에 대한 연구를 위하여 고성지역 친환경작목반 중심으로 유기농산물 생산지역 266필지와 무농약 농산물 생산지역 545필지로 나누어 비교 조사하였다. 유기재배지 토양의 Cd, Cu, As, Hg, Pb, $Cr^{6+}$, Zn, Ni는 각각 0.05, 14.5, 1.08, 0.92, 10.7, 1.34, 35.9, 22.2 mg $kg^{-1}$인 반면에 무농약 재배지 토양은 각각 0.32, 13.6, 1.01, 0.03, 10.4, 0.91, 42.4, 22.5 mg $kg^{-1}$이었다. 토양의 화학성 중 pH, 유기물, 유효 $P_2O_5$, 유효 $SiO_2$의 평균값은 유기 재배지 토양에서 각각 5.9, 28.9 g $kg^{-1}$, 126.2 mg $kg^{-1}$, 150.8 mg $kg^{-1}$이었으며, 무농약 재배지 토양은 각각 5.92, 28.4 g $kg^{-1}$, 98.4 mg $kg^{-1}$, 230.1 mg $kg^{-1}$이었다. 치환성 양이온인 $K^+$, $Ca^{2+}$, and $Mn^{2+}$의 평균값은 유기재배지 토양의 경우 각각 0.22, 4.83, 0.94 cmol + $kg^{-1}$이었고, 무농약 재배지 토양의 경우 각각 0.33, 5.25, 1.04 cmol+ $kg^{-1}$이었다. 유기 재배지 농업용수의 pH, DO, BOD, COD, SS는 각각 7.23, 8.40, 2.80, 1.86, 2.58 mg $l^{-1}$이었고, 무농약 재배지의 농업용수는 각각 7.65, 9.16, 2.25, 4.11, 4.00 mg $l^{-1}$이었다. 이와 결과를 기초로 하면, 유기농산물과 무농약농산물의 인증기준이 되는 토양과 농업용수의 차이가 없기 때문에 한국의 유기농산물과 무농약농산물로 나누어진 친환경농산물인증을 국제기준의 유기(식품)인증으로 일원화하여야 할 것으로 본다.

• 수산해양기술연구
• /
• 제23권2호
• /
• pp.61-65
• /
• 1987

선박용 강판(KR Grad A-3)과 라임티타니아계 피복 아아크 용접봉(E4303)을 이용하여 대기중용접 및 습식 수중 용접하여 TRC 임계응력치, 열 사이클, 경도분포, 확산성 수소량, micro조직 등을 실험적으로 조사한 결과를 요약하면 다음과 같다. 1. TRC 시험에 의한 초기 임계응력치 $\sigma$ 하(cr) 은 대기중 용접 및 수중용접의 어느 쪽에서도 Y groove 형상의 경우가 각각 71kg/mm 상(2), 51kg/mm 상(2) 로서 가장 높고, 반대로 45$^{\circ}$r 형 groove의 경우가 각각 52kg/mm 상(2), 41kg/mm 상(2)로서 최저이며, 수중용접부의 냉파괴 감수성이 대기중용접보다 높다. 2. 용접부의 경도는 조립 열영향부에서 가장 높고 대기중용접에서 약 H 하(k) 365, 수중용접에서는 급격한 냉각속도 때문에 약 H 상(k) 670으로 높게 되어 후자의 경우 파괴 감수성의 증가에 의한 낮은 임계응력치를 갖게 된다. 3. 48시간 동안의 확산성 수소량은 대기중용접에서 약 18cc/100g-weld-metal, 수중용접의 경우 약 48cc/100g-weld-metal로서 수중용접의 경우가 약 3배 정도 더 침입하고 있으므로 이의 방지책이 필요하다.

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.39-52
• /
• 1989

Native Kerean lawngrass (Zeysia japonica steud.) and Manilagrass ( Zeysia matrella Merr.) are frequently used as sport turf and lawn in Kerea and ether Asian countries because of its excellent summer qualities and superior winter-hardiness compared to ether warm-season turfgrass . The objective of this study was to investigate the effect of the plant growth retardants ( PGR ) en the inhibition (d the growth of the two Kerean native turfgrasses. Kerean lawngrass and Manilagrass were treated with [2 RS , 3 RS] -1- [4- chlorophenyl ] -4, 4-dimethyl -2- [1 H -1, 2, 4- tiazol -1- y] pentan -3- ol ( PP -333) at 93 and 930 gha -j ; 5-[4- chlorphenyl ]-3, 4, 5, 9, 10- peiitaaza - tetracyclo [5, 4, 1, 0 2 6 . o ~'~I -3, 9- diene ( BAS -106) at 16 and 160 gha ; [ E I-] - cyclohexyl -4, 4- dimethyl -2- [1, 2, 4- triazol -1- yl ]-1-pentene - 3- ol ( NTN -821) at 56 and 560 gha ', and 4- chloro -2- [$\alpha$- hydrozybenzy I isonicotin anilide ( CGR -811) at 92 gha in pot study . All PGR treatments were effective in reducing the plant height, with the exception of BAS -106 at 16 gha for Korean lawngrass ; however , all increased quality to some degree , with the exception of PP -333 at 93 gha . The low PGR rates significantly increased Korean lawngrass height during late jtily aitd mid-August . On the other hand , BAS -106 significantly increased Manilagrass height {rom 24 Septeml)er onwards . All PGR treatments haol higher turfgrass quality than untreatments , and also the high rates of PGIt treatments were more effective in increasing quality than the low rates observed on 8 October . Meanwhile , Manilagrass quality was increased to some extent than Korean lawegrass . PP - 333 was significantly effective in reducing clipping yield and the same results were found with the application of NTN -821 at 560 gha -l for both Korean lawngrass and Manilagrass , BAS -106 at 160 gha for Korean lawegrass , and CGR -811 at 92 gha for Manilagrass . The high PGR rates had higher turfgrass shoot weight observed on 8 October than the low rates , and there were little increases obtained with the low rates of PP -333 for Korean lawngrass and BAS - 1 06 for Manilagrass . Effeets on stolon growth varied between growth retardants , and between retardant treatments ; the high rates of PGR as well as the low rate of NTN -821 elongated stolon of Korean lawngrass and manoilagrass . However , PP -333 at 93 gha and BAS -106 at 16 gha - shortened stolons of Korean lawugrass , resulting in inhibition or little difference of stolon dry weight . NTN -821 at 560 gha and CGR -811 had no positive effect on the stolon length of Manilagrass . 101) -333 and the low rate of BAS -106 and NTN -821 decreased root weight of Korean lawng - rass All PGR rates had negative effect on the root weight of Manilagrass with the exception of BAS -106 CR -811 and the high rate of NTN -821 which made no difference in root weight between retarolant treatments and the control .

• Fisheries and Aquatic Sciences
• /
• 제25권11호
• /
• pp.537-548
• /
• 2022

Apparent digestibility coefficients (ADCs) of dry matter, crude protein, crude lipid, nitrogen-free extract, energy and essential amino acids in animal-based feed ingredients were determined for olive flounder (Paralichthys olivaceus). A reference diet (RF) was formulated to contain 1.0% chromic oxide (Cr₂O₃) as an inert indicator. Nine test diets were formulated to contain RF and one of the feed ingredients (pollock meal [PM], jack mackerel meal [JMM], anchovy meal [AM], cod meal [CM], sardine meal [SM], sand eel meal [SEM], tuna meal [TM], meat meal [MM] and squid liver meal [SLM]) at a 7:3 ratio in each diet designated as PM, JMM, AM, CM, SM, SEM, TM, MM and SLM, respectively. Olive flounder, averaging 150 ± 8.0 g, were stocked at a density of 25 fish per tank in 400-L fiberglass tanks attached with fecal collection columns. Feces were collected from triplicate groups of fish one time a day for four weeks. Dry matter and crude protein ADCs of CM and SEM were significantly higher than the other tested ingredients. Lipid ADCs of JMM, CM and SEM were significantly higher than the other test ingredients. Energy ADCs of CM and SEM were significantly higher than that of the other tested ingredients. The availability of amino acids in CM was generally higher than the other animal protein sources. PM exhibited the lowest amino acid availability among the treatments. Interestingly, MM exhibited significantly higher nutrient digestibility than several marine-based ingredients. However, CM and SEM are seeming to be highly digestible and effective to use in olive flounder diet compared to the other tested ingredients. Overall, the results of this study provide information about the bioavailability of nutrients and energy in animal feedstuffs to apply when formulating cost-effective practical feeds for olive flounder.