• 한국재료학회지
• /
• 제10권6호
• /
• pp.398-402
• /
• 2000

유도 용해후 열기계적 처리를 거친 3종류의 $Al_3Ti-Cr합금, 즉 Al_{67}Ti_{25}Cr_8,\;Al_{66}Ti_{24}Cr_{10}$ 및 Al_{59}Ti_{26}Cr_{15}에 대해 2.5% NaCl 용액 내에 부삭시험과 1000, 1100 및 $1200^{\circ}C$에서의 고온 산화시험을 실시하였다. 전기화학적 평가결과에서 Cr조성이 증가함에 따라 국부부식에 대한 내식성이 증가하였으며, 부동태 피막의 취성파괴를 방지하였다. XPS결과는 $Al_3Ti-Cr$합금의 부동태 피막은 주로 $Al_2O_3$로 구성되어 있으며, $TiO_2$ 및 $Cr_2O_3$도 공존하고 있음을 알 수 있었다. 고온 내산화성은 모든 시편이 전체적으로 뛰어난 내산화성을 지니고 있었는데, 구체적으로는 $Al_{59}Ti_{26}Cr_{15},\;Al_{66}Ti_{24}Cr_{10}\;및\;Al_{67}Ti_{25}Cr_8$의 순으로 증가하였다. 이는 합금내의 Al 함량이 증가할수록 $Al_2O_3$보호피막의 형성이 용이하였기 때문이었다.

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.147-149
• /
• 2009

We report the exchange bias in antiferromagnet/ferrimagnet $Cr_2O_3/Fe_3O_4$ core/shell nanoparticles. The magnetic field hysteresis curve for $Cr_2O_3/Fe_3O_4$ nanoparticles after field-cooling (FC) clearly showed both horizontal ($H_{EB}{\sim}$610 Oe) and vertical (${\Delta}M{\sim}$5.6 emu/g) shifts at 5 K. These shifts disappeared as the temperature increased toward the Neel temperature of $Cr_2O_3\;(T_N{\sim}$307 K). The $H_{EB}\;and\;{\Delta}M$ values were sharply decreased between the $1^{st}\;and\;the\;2^{nd}$ magnetic field cycles, and then slowly decreased with further cycling. These results are discussed in terms of the formation of single domains with pinned, uncompensated, antiferromagnetic spin and their evolution into multi-domains with cycling.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.420-424
• /
• 2004

The microstructure and electrical properties of $ZnO-Pr_{6}$$O_{11}$ $-CoO-Y_2$$O_3$-based varistors were investigated with and without various metal oxide additives (NiO, MgO, and $Cr_2$$O_3$). The addition of NiO promoted the grain growth while that of Cr$_2$O$_3$ decreased average grain size. Thereby, the varistor voltage was higher in $Cr_2$$O_3$-added composition. Among $ZnO-Pr_{6}$ $O_{11}$ /$-CoO-Y_2$$O_3$-based varistors, the$ Cr_2$$O_3$-added varistor exhibited the highest nonlinear exponent (51.2), the lowest leakage current (1.3 $\mu$A), and the lowest dielectric dissipation factor (0.0433).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.638-641
• /
• 1999

In consideration of Dielectric loss and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$, well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, Temperature Coefficient of Capacitor, relative resistivity for Temperature Compensation condensor study. dopping with Nio, $Cr_2O_3$, Temperature Characteristic is developed, Dielectric loss largely represented useful1 small values in specimens dopped with NiO 0.2wt%, and specimence sintered at $110^{\circ}C$ dopped with $Cr_2O_3$, 0.1wt% also relative resistivity largely showed tendency of decrement According to dopping NiO more.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.829-837
• /
• 2014

Titania-supported chromium oxides with different loadings have been embarked in catalytic oxidation of trichloroethylene (TCE) to inquire association of the formation of crystalline $Cr_2O_3$ with catalytic performances. A better activity in the oxidative TCE decomposition at chosen temperatures was represented when chromium oxides ($CrO_x$) had been dispersed on pure anatase-type $TiO_2$ (DT51D) rather than on phase-mixed and sulfur-contained ones such as P25 and DT51. The extent of TCE oxidation at temperatures below $350^{\circ}C$ was a strong function of $CrO_x$ content in $CrO_x$/DT51D $TiO_2$, and a noticeable point was that the catalyst has two optimal $CrO_x$ loadings in which the lowest $T_{50}$ and $T_{90}$ values were measured for the TCE oxidation. This behavior in the activity with respect to $CrO_x$ amounts could be associated with the formation of crystalline $Cr_2O_3$ on the support surface, that is less active for the oxidation reaction, and an easier mobility of the surface oxygen existing in noncrystalline $CrO_x$ species with higher oxidation states, such as $Cr_2O_8$ and $CrO_3$.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.184-188
• /
• 2002

Unsaturated $Cr(CO)_x(1{\leq}x{\leq}5)$molecules were generated in the gas phase from photolysis of $Cr(CO)_6$vapor in He using an unfocussed weak UV laser pulse and their reactions with $O_2$ and $N_2O$ have been studied. The formation and disappearance of the ground state CrO molecules were identified by monitoring laser-induced fluorescence(LIF) intensities vs delay time between the photolysis and probe pulses. The photolysis laser power dependence as well as the delay time dependence of LIF intensities from the CrO orange system showed different behavior as those from ground state Cr atoms, suggesting that the ground state CrO molecules were generated from the reaction between $O_2/N_2O$ and photo-fragments of $Cr(CO)_6$ by one photon absorption. The depletion rate constants for the ground state CrO by $O_2$ and $N_2O$ are $5.4{\pm}0.2{\times}10^{-11}$ and $6.5{\pm}0.4{\times}10^{-12}cm^3molecule^{-1}s^{-1}$, respectively.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.139-145
• /
• 2003

Fe-Cr 합금의 고체산화물 연료전지용 금속접속자로의 적용 가능성을 알아보기 위하여 페라이틱 스틸에 내산화 물질인 Y-Cr계 산화물을 졸 코팅하여 산화 특성을 연구하였다. YCr $O_3$졸 코팅된 페라이틱 스틸은 80$0^{\circ}C$에서 40시간 열처리 후에도 Fe계 산화물은 생성되지 않고, 주상으로 YCr $O_3$그리고 소량의 C $r_2$ $O_3$와 M $n_{1.5}$C $r_{1.5}$ $O_4$산화물 등이 생성되었다. Mn-Cr계 산화물은 금속 성분인 Mn이 내부로부터 확산에 의해 산화가 진행됨에 따라 입자가 성장하였다. 모든 YCr $O_3$졸 코팅된 시편에서의 전기 저항을 나타내는 Log(ASR/T) 값은 -4.57~-4.70Ω$ extrm{cm}^2$K￣$^1$로 코팅되지 않은 금속의 Log(ASR/T), -3.99Ω$\textrm{cm}^2$K￣$^1$보다 작아지므로 금속접속자로의 적용 가능성을 확인할 수 있었다.있었다.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.221-227
• /
• 2006

Oxidative TCE decomposition over $TiO_2$-supported single and complex metal oxide catalysts has been conducted using a continuous flow type fixed-bed reactor system. Different types of commercial $TiO_2$ were used for obtaining the supported catalysts via an incipient wetness technique. Among a variety of titanias and metal oxides used, a DT51D $TiO_2\;and\;CrO_x$ would be the respective promising support and active ingredient for the oxidative TCE decomposition. The $TiO_2-based\;CrO_x$ catalyst gave a significant dependence of the catalytic activity in TCE oxidation reaction on the metal loadings. The use of high $CrO_x$ contents for preparing $CrO_x/TiO_2$ catalysts might produce $Cr_2O_3$ crystallites on the surface of $TiO_2$, thereby decreasing catalytic performance in the oxidative decomposition at low reaction temperatures. Supported $CrO_x$-based bimetallic oxide systems offered a very useful approach to lower the $CrO_x$ amounts without any loss in their catalytic activity for the catalytic TCE oxidation and to minimize the formation of Cl-containing organic products in the course of the catalytic reaction.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.223-228
• /
• 1998

$SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu)계의 비정질 박막을 현미경용 슬라이드 유리판 위에 전구체 용액을 스핀코팅방법으로 제조하였다. 전구체 용액은 tetraethyl orthosilicate, titanium trichloride, 그리고 코발트질산염, 크롬질산염, 구리질산염을 사용하여 합성하였다. X-선 회절분석 (${\theta}-2{\theta}$ scan)을 통하여 박막내에 $Co_3O_4$, $Cr_2O_3$, CuO 결정의 석출이 없는 비정질 박막임을 확인하였다. 코발트는 4면체배위의 $ Co^{2+}$로, 크롬은 4면체정배위의 $Cr^{6+}$로, 구리는 8면체배위의 $Cu^{2+}$로 존재하였다. 이 비정질박막의 표면에서 crack과 texture는 발견할 수 없었으며 파단면에서 박막악과 유리판 간의 계면은 균일한 조직을 보였다.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.