• Journal of Welding and Joining
• /
• v.16 no.1
• /
• pp.88-97
• /
• 1998

The surface characteristics of 13Cr stainless steel systems by plasma nitriding were investigated. The plasma nitriding for the 13Cr steels, in which the nitriding forming elements such as Ti, V, W, Nb, Al, Zr and Si were added about 2~3wt.%, respectively, was performed. In all nitrided specimens, .epsilon.-F $e_{2-3}$N, UPSILON.'-F $e_{4}$N and CrN were detected as the nitrides with the a-Fe in the nitrided layer. VN and .betha.- $W_{2}$N were also detected in 13Cr-3V and 13Cr-3W alloys. The growth of the nitrided layer was controlled by the diffusion process. The thickness of the nitrided layer was similar in the 13Cr-2Nb and 3Zr specimens to that of 13Cr(BM) specimen, while the others exhibited the thinner layer. The activation energy for the growth of the nitrided layer in the temperature range of 773-873K was about 130kJ/mol in 13Cr(BM), 13Cr-2Ti, 3W, 3Al, 3Zr and 3Si alloys. The hardness of the nitrided specimens was significantly increased above Hv1000, comparing to the non-nitrided specimen. The specimens with the nitrided forming elements revealed much higher hardness values and, especially, 13Cr-3Al, 3V and 3Si specimens were significantly hardened up to Hv1300.v1300.0.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.1
• /
• pp.39-43
• /
• 2007

The pure CrN powders oxidized to $Cr_2O_3$ noticeably above $850^{\circ}C$ in air. When these powders were sintered into bulk samples at $1500^{\circ}C$ under 40 atm of $N_2$ pressure, the CrN phase partly changed into the $Cr_2N$ phase, owing to the partial loss of nitrogen from CrN. When the bulk sample was heated at $1000-1200^{\circ}C$ for 100 hr under vacuum, the CrN phase also progressively changed into $Cr_2N$. At the same time, a relatively thin $Cr_2O_3$ layer formed on the bulk sample due to the reaction of chromium with residual oxygen in vacuum.

• Journal of Environmental Science International
• /
• v.3 no.4
• /
• pp.439-443
• /
• 1994

In aqueous acid solution ${[Cr(CN)_6]}^{3-}$ aquates via a series of stepwise stereospecific reactions to give ${[Cr{(H_2O)}_6]}^{3+}$as the final product.Some of the intermediate cyanoaquo complexes in the sequence have been isolated.These complexes aquate by both acid independent and acid denpendent pathways, the latter involving protonation of the cyano ligands followed by aquation of the singly protonated species. The kinetic data for the aquation of {[CrCN{(H_2O)}_5]}^{2+}$ are consistent with the transition state structure ${[{(H_2O)}_4Cr(CN)-OH-Cr{(H_2O)}_5]}^{3+}$. Addition of $Cr^{2+}$ to solutions of cyanocobalt(III) complexes produces the metastable intermediate${[CrNC{(H_2O)}_5]}^{2+}$ This isomerizes to in a $Cr^{2+}$-catalyzed reaction which occurs by a ligand-bridged electron-change mechnism. From acid catalysis on these aquation reactions, it product HCN. Especially, $HSO_3$-ions do the role of catalyst in the formation of HCN from $CrCN^{3-}$

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.387-391
• /
• 1999

$Pb^{2+}$ and $Cr^{3+}$ uptake capacity by Sargassum horneri was 185.5 mg $Pb^{2+}$/g biomass and 102.6 mg $Cr^{3+}$/g biomass, respectively. An adsorption equilibria were reached within about 0.5 hr for $Pb^{2+}$ and 1 hr for $Cr^{3+}$. The adsorption parameters for $Pb^{2+}$ and $Cr^{3+}$ were determined according to Langmuir and Freundlich model. With an increase in pH values of 2 to 5, $Pb^{2+}$ uptake was increased, however $Cr^{3+}$ uptake jwas constant. The selectivity of mixture solution showed the uptake order of $Pb^{2+}$>$Cu^{2+}$>$Cr^{3+}$>$Cd^{2+}$. $Pb^{2+}$ and $Cr^{3+}$ adsorbed by S. horneri could be recovered from 0.1M HCl, 0.1M ${HNO}_3$ and 0.1M EDTA by desorption process, and the efficiency of $Pb^{2+}$ desorption was above 98%, whereas the efficiency of $Cr^{3+}$ desorption was below 34%.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.477-483
• /
• 1987

Cr2O3 doped Pb(Zr0.525 Ti0.475)O3 piezoelectric ceramics were prepared from reagent grade oxide mixture, PbO, ZrO2, TiO2 and Cr2O3. Piezoelectric and aging properties of specimens were measured for various additions of Cr2O3. Generally, it has been known that aging rate decreased with Cr2O3 addition by stabilizing the domain wall. But hysteresis loops showed that the domain destabilization was occurred at high electric field (larger than 10KV/cm). In smaller additions of Cr2O3 (0-0.2mol%), aging rate increased and microcracks were created with increasing poling filed due to increasing internal stress. In larger additions of Cr2O3(0.4∼0.6mol%), aging rate decreased with increasing poling field.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.3
• /
• pp.142-151
• /
• 1995

In this research, a thin layer of Cr was coated on the pure Ni and Inconel 601 by PECVD (Plasma Enhanced Chemical Vapor Deposition) in order to study the effect of Cr on the oxidation behavior at high temperature. Cr coated Inconel 601, which was oxidized at $1100^{\circ}C$ for 24 hours, formed a protective $Cr_2O_3$ oxide layer and the resistance to isothermai oxidation was improved. On the other hand, oxidation resistance of Cr coated Inconel 601 at 100$0^{\circ}C$ was not significantly improved, probably due to the formation or insufficient $Cr_2O_3$ layer. But, when oxidized at $1000^{\circ}C$ and $1100^{\circ}C$ for 100 hours, Cr coated Inconel 601 improved isothermal oxidation resistance by the formation of continuous $Cr_2O_3$ external scale and by the development of $Al_2O_3$ subscales. Cr coated Ni formed inner layer of $Cr_2O_3$ within almost pure NiO, which provided additional cation vacancies, thus increasing the mobility of Ni ions in this region. It is believed that this doping effect resulted in an increase in the observed oxidation rate compared with pure Ni and did not improve the oxidation resistance.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.36-42
• /
• 2003

The oxidation behaviors of Y-Cr bilayer deposited on ferritic steel by magnetron-sputtering for application of the Fe-Cr alloys as interconnectors of planar-type solid oxide fuel cells (SOFCs) were studied. After oxidation at $800^{\circ}C$ for 40 hours, the major phase of $Y_2$$O_3$and the minor phase of $YCrO_3$, $Mn_{1.5}$ $Cr_{1.5}$ $O_4$and Cr$_2$SiO$_4$were formed in the Y/Cr bilayered samples, while the major phase of Cr$_2$O$_3$and the minor phase of $Y_2$$O_3$were formed as the major phase in the Cr/Y bilayered samples. The Log(ASR/T) that expresses electric resistance of the Y/Cr coated specimen with nonconducting $_Y2$$O_3$oxide showed high value of -2.80 Ω$\textrm{cm}^2$$K^{-1}$ / and that of the Cr/Y coated specimen with conducting $Cr_2$$O_3$oxide appeared to be -4.11 Ω$\textrm{cm}^2$$^{K}$ . The electric resistance of the Y/Cr coated specimen was largely increased due to the formation of high resistance oxide scales. However, the Cr/Y coated specimen did not show any increase in the electric resistance and had the long-term stability of oxidation because there was no formation of the secondary phases with low conductivity.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.372-378
• /
• 2009

The coloring agents $Cr_2O_3$ and $CrCl_3$ were manipulated in this study to synthesize ZnO-$Al_2O_3-Cr_2O_3$ system pigments by changing their mixing ratio. The addition of varying amounts of mineralizer was also tested to obtain better color development of the pink pigment. In the synthesis of ZnO- $Al(OH)_3-Cr_2O_3-CrCl_3$ pigments, the best composition is $Cr_2O_3$-0.1 mole and $CrCl_3$-0.2 mole when $Cr_2O_3$ is partially substituted with $CrCl_3$ to synthesize them. Among the $ZnAl_{1.6-x}Cr_{0.2+x}O_4$ compositions to which a mineralizer was not added, ZnO-1mole, $Al(OH)_3$-1.7 mole, $Cr_2O_3$-0.075 mole, and $CrCl_3$-0.15 mole showed a desirable pink hue. The measurements of pigments $L^*$, $a^*$ and $b^*$, were $L^*$ 81.81, $a^*$ 16.65 and $b^*$ 0.45, and when the synthesized pigments were applied to a zinc glaze, the measurements were $L^*$ 60.41, $a^*$ 28.39, and $b^*$ 16.97. When adding a mineralizer, a 2 wt% addition resulted in the most favorable pink color. The composition for the most favorable result that included a mineralizer was $Al(OH)_3$-1.8 mole, $Cr_2O_3$-0.05 mole, and $CrCl_3$-0.1 mole, and the calcination temperature was $1250^{\circ}C$. The pigment color analysis showed $L^*$ 82.52, $a^*$17.14 and $b^*$-1.18, and the measurements of $L^*$, $a^*$ and $b^*$ in the glaze were $L^*$ 60.97, $a^*$ 28.77 and $b^*$ 13.72.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.21-21
• /
• 2014

$CrN/Al_2O_3/CrN$ 다층 코팅을 HIPIMS와 ALD간 하이브리드 코팅법을 통해 형성하였다. ALD를 통해 CrN 층에 도입한 $Al2O_3$층의 두께 및 위치가 $CrN/Al_2O_3/CrN$ 다층 코팅층의 미세구조, 표면 거칠기, 기계적 특성 및 화학적 특성에 미치는 영향에 대해 조사하였다. 전체 공정시간은 거의 변화시키지 않고도, ALD를 이용한 $Al2O_3$층의 삽입에 의하여 기계적/화학적 특성이 크게 개선될 수 있음을 확인하였으며, 개선된 특성에 대한 원인에 대해 조사하였다.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.