• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.293-299
• /
• 1994

Fifty ancient Korean coins originated in Choson period have been determined for 11 elements such as Sn, Fe, As, Au, Co, Sb, Ir, Os, Ru and Ni by destructive and non-destructive neutron activation analysis as well as for 3 elements such as Cu, Pb and Zn by atomic absorption spectroscopy. The multivariate data have been analyzed by principal component mapping method. The spread of sample points in the eigenvector polt has been attributed to common origins of some elements.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.275-282
• /
• 2008

Objective: The purpose of this study was to investigate the effect of using laser for ceramic bracket bonding of porcelain surfaces and to compare it with conventional treatment of porcelain surfaces. Methods: Ninety feldspathic porcelain specimens were divided into 9 groups of 10, with each group having different surface treatments performed. Surface treatment groups were orthophosphoric acid, orthophosphoric acid with silane, hydrofluoric acid, hydrofluoric acid with silane, sandblasted, sandblasted with silane, laser etched, laser etched with silane, and glazed surface served as a control group. In the laser etched groups, the specimens were irradiated with 2-watt superpulse carbon dioxide ($CO_2$) laser for 20 seconds. Ceramic brackets were bonded with light-cure composite resin and all specimens were stored in water at $37^{\circ}C$ for 24 hours. Shear bond strength was determined in megapascals (MPa) by shear test at 1 mm/minute crosshead speed and the failure pattern was assessed. For statistical analysis, one-way ANOVA and tukey test were used. Results: Statistical analysis showed significant differences between the groups. The HFA + S group showed the highest mean shear bond strength ($13.92{\pm}1.94\;MPa$). This was followed by SB + S ($10.16\;{\pm}\;1.27\;MPa$), HFA ($10.09\;{\pm}\;1.07\;MPa$), L + S ($8.25\;{\pm}\;1.24\;MPa$), L ($7.86\;{\pm}\;0.96\;MPa$), OFA + S ($7.22\;{\pm}\;1.09\;MPa$), SB ($3.41\;{\pm}\;0.37\;MPa$), OFA ($2.81\;{\pm}\;0.37\;MPa$), G ($2.46\;{\pm}\;1.36\;MPa$), Bond failure patterns of HFA and silane groups, except L + S, were cohesive modes in porcelain while adhesive failure was observed in the control group and the rest of the groups. Conclusions : A 2-watt superpulse $CO_2$ laser etching of porcelain surfaces can provide a satisfactory result for porcelain surface treatment for ceramic bracket bonding. Laser irradiation may be an alternative conditioning method for the treatment of porcelain surfaces.

• Korean Journal of Plant Resources
• /
• v.28 no.5
• /
• pp.656-664
• /
• 2015

To produce high quality watermelon, three tetraploid watermelon breeding lines (‘SA03-1’, ‘SA06-1’ and ‘SB01-1’) were developed by treatment with different chromosome doubling reagents. To identify the optimal tetraploid inductive conditions, the three watermelon breeding lines were selected by counting the number of doubled chloroplasts in guard cells. Tetraploid induction rates differed depending on the genotypes and treatment with doubling reagents. However, the highest induction rate occurred with 1.0% colchicine (82.2%). These putative tetraploid lines were re-confirmed for ploidy using flow cytometric analysis and chromosome counting. The internode length of the tetraploid breeding lines was different when the leaf size was larger in all three tetraploid lines compared to their diploids. The fruit weight of the tetraploid fruits for ‘SA03-1’ and ‘SB01-1’ was lower than for their diploid, and the rind thickness and total sugar content (°Brix) of tetraploid SB01-1 were significantly different from those of its diploid. Tetraploid lines were sterile, yielded a lower number of seeds per fruit for ‘SA03-1’ (21), ‘SA06-1’ (62), and ‘SB01-1’ (34.7), and the seeds were larger and thicker than those of their diploids. These tetraploid breeding results will be useful for breeding new seedless watermelon cultivars.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.199-200
• /
• 2008

ZnO을 주원료로 하고 첨가제로 $Bi_2O_3$, $Sb_2O_3$, $Nd_2O_3$, CoO, $Cr_2O_3$, $MnO_2$, NiO를 고정한 후 $Y_2O_3$ 첨가량에 바리스터의 전기적 특성을 검토하였다. $Y_2O_3$ 첨가량이 증가할 수록 바리스터 전압이 직선적으로 증가함을 확인할 수 있으며 결정립계에 존재하는 스핀넬상에 $Y_2O_3$가 이차상으로 존재함을 확인 할 수 있었다. $Y_2O_3$ 첨가에 따라 ZnO 결정입자 성장을 방해하여 바리스터 전압을 증가시키는 반면 결정립의 크기를 불균일하게 하여 유전율을 감소시키고 유전손실은 증가함을 확인하였다. 본 연구 결과 $Y_2O_3$ 첨가로 바리스터 전압은 350 V/mm이상을 얻을 수 있으며 누설전류를 $1{\mu}A$이하로 하는 조성을 얻을 수 있었으며 소형 바리스터 제작이 가능함을 확인하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.303-307
• /
• 2022

Magnetoelectric (ME) properties of 3-0 type particulate composites have been investigated with respect to application features for reliable magnetic sensitivity and magnetically-induced output voltage. In order to figure out the magnetoelectric characteristics in the ME composites, frequency dependent ME responses were studied from [0.948 Na_0.5K_0.5NbO₃-0.052 LiSbO₃]-[Co_1-xZn_xFe₂O₄] (NKNLS)/Co_1-xZn_xFe₂O₄ (CZFO, x=0, 0.1, and 0.2). As a result, the maximal α_ME of 23.15 mV/cm·Oe was achieved from the NKNLS-CZFO (x_Zn = 0.1) composites at resonance frequency of 315 kHz and H_dc = 0 Oe. From the frequency dependent ME responses, it is clearly described that the self-biased ME composites can be used for applications as both magnetic sensors and energy harvesters, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.307-307
• /
• 2010

최근 유한연료의 고갈로 인해 세계 유가가 불안정 됨으로서 대체 에너지에 대한 연구가 많이 진행 되고 있다. 특히 압전 소자를 이용한 에너지 하베스팅은 압전 역효과를 이용한 것으로서 주변에서 무의미하게 버려지는 진동이나 바람, 열 에너지를 실 생활에 사용할 수 있는 전기 에너지로 변환할 수 있는 유망한 기술 중 하나이다. 이러한 에너지 하베스팅 기술은 일본과 같은 선진국에서 이미 지하철 및 일반 다리와 같이 진동이 극히 많은 곳에서 응용되고 있다. 이러한 에너지 하베스팅 기술을 응용 하려면 전압출력 계수($g_{33}$)가 높아야 한다. 이것은 압전 d 상수와 유전상수에 영향을 많이 받는 것으로 알려져 있다. 현재가지 응용되는 압전 하베스팅 조성은 Pb(Zr,Ti)$O_3$ (PZT)를 기초로한 세라믹이 응용되고 있다. Pb(Zr,Ti)$O_3$ (PZT) 세라믹은 Morpohotropic phase boundary(MPB)에서 전기기계 결합계수 (kp) 와 기계적 품질계수 (Qm) 이 각각 0.5와 500으로 우수한 특성을 나타낸다. 또한 큐리온도 (Tc) 도 $400^{\circ}C$로 온도 안정성 또한 높다. 하지만 $1000^{\circ}C$ 이상에서 소결하는 PbO는 소결 중 급격한 휘발로 환경적 오염 뿐 아니라 특성의 저하를 야기시킨다. 그래서 몇몇 나라에서는 그 사용을 제한하고 점차적으로 사용을 줄여 나가고 있는 동시에 PbO가 첨가되어 있지 않은 Lead-Free 세라믹의 연구가 많이 진행되고 있다. Lead-Free 세라믹 중 alkaline niobate를 기초로 한 페로브스카이트 구조의 ($Na_{0.5}K_{0.5})NbO_3$ (NKN) 은 PbO를 기초로 한 세라믹을 대체할 유망한 후보자 중 하나이다. 하지만 NKN세라믹의 K 성분의 조해성 및 고온에서의 휘발로 인해 일반 적인 소결 방법으로는 고밀도의 세라믹을 얻기 매우 어렵다. 그래서 Hot pressing, Hot forging, RTGG(Reactive Template Grain Growth), SPS(Spark plasma Sintering)와 같은 특별한 소결 법을 이용하거나 $K_8CuNb_4O_{23}$(KCN) 이나 $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$(KCT) 등을 첨가하여 그 소결성을 향상 시키는 방법도 있다. 또한 압전 d상수를 향상 시키기 위해 $Nb_2O_5$나, $La_2CO_3$, $CeO_2$, $Li_2CO_3$ 등을 치환함으로써 압전 d상수를 향상 시켜 전압출력 계수를 높이는 연구 또한 많은 보고가 되어 있다. 특히 $Li_2CO_3$의 첨가는 일반 적인 소결 방법으로도 밀도의 조밀함을 향상 시켜 그에 따른 높은 유전율과 전기기계 결합계수, 압전 d상수를 가져 많은 연구가 되어지고 있다. 그래서 본 연구에서는 일반적인 ($K_{0.5}N_{0.5})_{1-x}Li_x(Nb_{0.96}Sb_{0.04})O_3$ + 0.2mol%$La_2O_3$ + 1.2mol%$K_8CuNb_4O_{23}$ 세라믹에 x(=Li) 치환에 따른 유전 및 압전특성을 조사하였다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.386-393
• /
• 2002

Fabricatio of the potassium-titanate fiber with K2O${\cdot}nTiO_2$ composition and coating of electrically conductive Sb-doped $SnO_2$ (ATO: Antimony Tin Oxide) layer on the fiber on the fiber were the fiber were the aims of this work. The fiber fabricated by slow-cooling technique showed the mean length of $15{\mu}m$ and mean diameter of $0.5{\mu}m$. Three different coating methods i.e, sol-gel, co-precipitation and urea technique, were attempted to coat the conductive ATO layer on the potassium-titanate fiber. The influences of coating method, concentrations of ATO(5∼70wt%) and Sb (0∼20wt%), temperature in the range of $450\;to\;800^{\circ}C$, number of washing (3∼4 times) on the resistivity of the ATO coated fiber were examined in details. The fiber coated ATO by coprecipitation exhibited lower resistivity of 103${\Omega}{\cdot}$cm at the 30 wt% of ATO, and showed nearly constant low value of $60{\Omega}{\cdot}cm\;to\;90{\Omega}{\cdot}$cm at the higher concentration of ATO.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.51-56
• /
• 2016

The most widely used glue in a corrugator is starch, which is a natural polymer. This material needs thermal energy to achieve a binding force, so a heating section is installed in a corrugator. However, this heating section can cause quality problems in linerboards and corrugating medium and increase the production cost because of the high cost of fossil resources. Therefore, a new adhesive that provides the binding force at lower temperatures than the conventional one must be developed. In this study, SB-latex was selected as a co-adhesive and added to the starch solution. The addition of the SB-latex was determined based on the viscosity of the new adhesive. The adhesive strength and the drying energy reduction of a corrugated board were measured to evaluate the functionalities of the new adhesive. The addition of SB-latex was determined to be under 20% of the oven-dried starch based on the viscosity of the new adhesive. The adhesive strength was improved and the drying energy was reduced by applying the new adhesive.

• Economic and Environmental Geology
• /
• v.28 no.2
• /
• pp.147-154
• /
• 1995

Coal fly ashes collected from the Samcheonpo and the Seocheon Power Plants were analyzed for major and minor components and heavy metals such as As, Cd, Co, Cr, Cu, Ga, Hg, Mo, Ni, Pb, Sb, V and Zn in order to suggest basic data to apply coal fly ash as fertilizer or soil ameliorator. The specific gravity of the samples was less than 2.0, and amounts of organic matter range from 5.0% to 12.3%. The identified minerals by XRD were mainly quartz, mullite and pyrite in anthracite coal, and mainly quartz and mullite in bituminous coal. Generally, the contents of heavy metal elements analyzed were lower less than those of soil, though higher in some samples. Element couples of some elements( e.g., As-Mo, Zn ; Mo-As, Sb, V, Zn ; Sb-Zn ) show positive correlations with each other, but the high correlations of toxic elements such as As, Pb, Cd and Hg indicate to give attention to apply coal fly ash as fertilizer or soil ameliorator.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1471-1474
• /
• 1998

ZnO Varistor with composition of ZnO, $Bi_2O_3$, $Sb_2O_3$, CoO, NiO, $MnO_2$, $Cr_2O_3$, $Al_2O_3$ was fabricated by sintering methods. The purpose of this paper is to present certified voltage-current test data and a summary of electrical characteristics of the ZnO varistors.