• 청정기술
• /
• 제26권2호
• /
• pp.145-150
• /
• 2020

아산화질소(N₂O)는 6대 온실가스 중 하나로 이산화탄소(CO₂)의 310배에 해당하는 지구온난화지수(global warming potential, GWP)를 나타내어 N₂O를 저감하는 것은 필수적이다. 선택적 촉매환원법(selective catalytic reduction, SCR)은 대기오염 물질의 하나인 NOx의 제거를 위해 암모니아를 환원제로 사용하여 무해한 N₂ 및 H₂O로 전환하는 기술로 높은 탈질효율을 나타낸다. 본 연구에서는 NH₃-SCR반응에서 스팀 처리된 Fe-BEA 촉매가 활성에 미치는 영향을 조사하기 위하여 Fe-BEA 촉매는 Fe를 이온교환하기 전, 고정층 반응기로 100 ℃에서 2 h 동안 스팀 처리 되었다. 제조된 촉매의 NH₃-SCR반응 테스트는 고정층 반응기로 WHSV = 180 h^-1, 370 ~ 400 ℃에서 수행되었다. 100 ℃에서 스팀 처리된 Fe-BEA(100) 촉매가 370 ~ 390℃에서 Fe-BEA 촉매보다 다소 높은 활성을 나타내었다. NH₃-SCR 활성에 영향을 주는 원인을 파악하기 위하여 제조된 촉매는 BET, ICP, NH₃-TPD, H₂-TPR, ²⁷Al MAS NMR을 통하여 특성분석 되었다. H₂-TPR결과를 통해 Fe-BEA(100) 촉매가 Fe-BEA 촉매 보다 isolated Fe³⁺의 환원이 더 많이 일어난 것을 확인하였으며, 스팀 처리는 활성종인 isolated Fe³⁺의 양을 늘려주어 활성이 증가한 것으로 판단된다.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.18-24
• /
• 2007

Mullite-PSZ composite was prepared by sol-gel method using $Al(sec-OC_4H_9)_3,\;Si(OC_2H_5)_4,\;ZrOCl_2\;8H_2O\;and\;Y_2O_3$. The sinterability ana mechanical properties of powder compacts sintered at $1,650^{\circ}C$ for 4 hrs were investigated for various PSZ contents. In result Al-Si spinel formed at $980^{\circ}C$ from amorphous dried gel, and zirconia as well as mullite crystal formed above $1,200^{\circ}C$. The sintered body was densified to $97{\sim}98%$ except the specimen containing 25vol% PSZ which showed the relative density of about 95% obtained by sintering at $1,650^{\circ}C$ for 4 h. The flexural strength of the sintered body was a maximum value of 290 MPa in 20 vol% PSZ, which was also considerably larger than the value of 200 MPa without PSZ. The value of the fracture toughness increased linearly with increase of PSZ content and showed a maximum value of $4.3MPam^{1/2}$ in 25 vol% PSZ, Namely this value was remarkably larger than the $value(2.6MPam^{1/2})$ of pure mullite without PSZ.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.1233-1236
• /
• 2010

본 연구에서는 메탄을 물질로 산화실험을 수행하였다. 메탄의 발화온도가 탄화수소 중에 가장 높으며, 대부분의 전이금속촉매 활성온도가 가장 높게 나타나는 물질이므로 메탄의 연소가 일어날 경우 대부분의 탄화수소류는 연소가 일어날 수 있으므로 메탄의 산화반응을 연구하였다. 메탄의 산화를 위한 전이금속 촉매중 망간을 산화물형태로 $Al_2O_3$, $TiO_2$에 담지하여 메탄에 대한 활성능을 측정하였으며, 조촉매로 금속산화물을 이용하여 활성능의 변화를 연구하였다. 또한 자연에 존재하는 천연망간광석과 금속산화물을 담지하여 최적의 메탄에 대한 활성능을 지닌 촉매를 선별하였다. 조촉매로는 Ce, Sn, Ni, Co, Mo 등을 이용하였다. 또한 본 연구에서는 촉매 제조는 과잉용액함침법을 사용하여 담지체에 촉매물질을 분산하였으며, 온도와 유량에 대한 각 조성 촉매의 활성능을 측정하여 활성화에너지 및 $T_{50}$, $T_{90}$을 도출하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2726-2732
• /
• 2014

The promoting effect of rhodium on the structure and activity of the supported Cu-Co based catalysts for CO hydrogenation was investigated in detail. The samples were characterized by DRIFTS, $N_2$-adsorption, XRD, $H_2$-TPR, $H_2$-TPD and XPS. The results indicated that the introduction of rhodium to Cu-Co catalysts resulted in modification of metal dispersion, reducibility and crystal structure. DRIFTS results of CO hydrogenation at reaction condition (P=2 MPa, $T=260^{\circ}C$) indicated the addition of 1 wt % rhodium improved hydrogenation ability of Cu-Co catalysts. The ethanol selectivity and CO conversion were both improved by 1 wt % Rh promoted Cu-Co based catalysts. The alcohol distribution over un-promoted and rhodium promoted Cu-Co based catalysts obeys A-S-F rule and higher chain growth probability was got on rhodium promoted catalyst.

• 한국광물학회지
• /
• 제30권4호
• /
• pp.179-186
• /
• 2017

본 연구는 남한산성 한봉성 여장에 사춤으로 사용된 석회 모르타르를 분석하여 조선시대에 사용된 석회의 광물학적 특성을 파악하고자 하였다. 편광현미경 관찰 결과 여장의 모르타르는 기질에 석영, 장석, 운모, 휘석과 불투명 광물을 함유하고 있으며 XRD 분석을 통해 점토 광물인 녹니석, 카올린을 추가로 확인하였다. 입도 분석 결과 시료의 입도 분포가 넓고 크기가 균일하지 않으며 입도의 60%가 모래영역에 해당되었다. XRF 분석 결과 석회의 주성분인 Ca은 8.71-11.18%로 나타났으며 토양에서 확인되는 $SiO_2$, $Al_2O_3$, $Fe_2O_3$가 주요 성분으로 확인되었다. TG-DTA 분석 결과 약 $750^{\circ}C$ 부근에서 탄산칼슘의 탈탄산반응으로 인한 흡열피크와 약 10%의 중량감소율을 확인하였으며, SEM을 통한 미세조직 관찰 결과 조밀하게 응집된 비정질, 능면상의 방해석 결정이 관찰되었다. 이를 바탕으로 여장의 사춤재는 석회와 토양이 혼합된 모르타르이며 여장의 위치나 사용부위에 따른 광물 조성 차이는 보이지 않으므로 당시 한봉성 여장은 동일한 재료와 기법을 사용하여 개축된 것으로 판단된다.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.231-243
• /
• 2004

Sequential extraction was carried out on twenty two subsamples of three ferromanganese crusts from three seamounts (Lemkein, Lomilik, and Litakpooki) near the Marshall Islands in the western Pacific. The extraction was designed to fractionate Fe-Mn crust forming elements into low defined groups: (1) exchangeable and carbornate, (2) Mn-oxide, (3) Fe-oxyhyd.oxide, and (4) residual fraction. X-ray diffraction result shows that target material were well removed by each extraction step except for CFA in phosphatized crusts generation. According to chemical analysis of each leachate, most of elements in the Fe-Mn crusts are bound with two major phases. Mn, Ba, Co, Ni, Zn, (Fe, Sr, Cu, and V) are strongly bounded with Mn-oxide $({\delta}-MnO_2)$ phase, whereas Fe, Ti, Zr, Mo, Pb, Al, Cu,(V, P, and Zn) show chemical affinity with Fe-oxyhydroxide phase. This result indicates that significant amount of Al, Ti, and Zr can not be explained by detrital origin. Ca, Mg, K, and Sr mainly occur as exchangeable elements and/or carbonate phase. Outermost layer 1 and inner layer 2 which are both young crusts generations are similar in chemical speciations of elements. However, some of Fe-oxyhydroxide bounded elements (Pb, Y, Mo, Ba, Al, and V) in phosphatized innermost layer 3 are released during phosphatization and incorporated into phosphate (Pb, Y, Mo, and Ba) or Mn-oxide phase (Al and V). Our sequential extraction results reveal that chemical speciations of elements in the hydrogenetic crusts are more or less different from interelemental relationship calculated by statistical method based on bulk chemistry.

• 한국음향학회지
• /
• 제41권1호
• /
• pp.9-15
• /
• 2022

기존의 나노입자 현탁액의 분산과정의 한계를 극복하여 단분산된 나노입자만으로 이루어진 현탁액을 얻기 위하여, 기존의 방법으로 전분산 처리된 현탁액을 다시 초음파 무화효과 및 사이클론을 이용하여 여과하는 방법을 제안하였다. 평균직경 250 nm인 Al₂O₃나노입자로 0.5 wt%인 현탁액을 만들어 초음파세척기 및 호모지나이저를 이용하여 각각 전처리 분산된 현탁액에 대하여 제안한 여과법을 적용하였다. 그 결과 초음파세척기로 전처리 분산한 경우 단분산된 나노입자 현탁액으로 여과하기 위해서는 종속 연결된 사이클론이 3개가 요구되는 반면, 호모저나이저로 전처리 분산된 현탁액의 경우는 2개의 사이클론으로도 가능함을 확인 하였다. 초음파 무화기 주파수의 조정과 사이클론의 설계 변경에 의해 다양한 종류의 나노입자에 대한 여과가 가능할 것으로 기대된다.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.182-191
• /
• 1999

The sorption of UO$_{2}$$^{2+}$ onto goethite and kaolinite under various experimental conditions was successfully interpreted using surface complexation modeling (SCM). The SCM approach used in this work is the triple-layer model (TLM) in which weakly bonded ions are modeled as outer-sphere (ion-pair) complexes and strongly bonded ions as inner-sphere (surface coordination) complexes. The change of ionic strength did not affect the U(VI) sorption onto goethite, thus the formation of inner-sphere surface complexes, (FeO)$_2$UO$_2$ and (FeO)$_2$(UO$_2$)$_3$OH$_{5}$ was assumed to simulate the effects of ionic strength and goethite concentration. On the other hand, the U(VI) sorption onto kaolinite showed ionic strength dependence, thus the formation of AlO-UO$_{2}$$^{2+}$(outer-sphere complex) and SiO(UO$_2$)$_3$OH$_{5}$ (inner-sphere complex) was assumed to simulate the experimental data. In the presence of carbonates, the sorption of U(VI) onto kaolinite decreased in the weakly alkaline pH range. This was well simulated assuming the formation of a outer-sphere surface complex, A1OH$^{2+}$- (UO$_2$)$_2$CO$_3$OH$_3$. Since SCM approach uses thermodynamic data such as surface complexation constants, it is more predictive than empirical modeling approach in which conditional values such as partition coefficient are used. used.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.53-57
• /
• 2003

The MarM247 based superalloy (8wt.%Cr- 9wt.%Co- 3wt.%Ta- 1.5wt.%Hf- 5.6%wt.Al- 9.5wt.%W- Bal. Ni) specimens were diffusion aluminized by for types of pack cementation methods, and their coating structure and their high temperature oxidation resistance were investigated. The coated specimens treated at 973K in high aluminum concentration pack had a coating layer containing large hafunium rich precipitates, which were originally included in substrate alloy. After the high temperature oxidation test in air containing 30 vol.% $H_2O$ at 1273K ~ 323K, the deep localized corrosion which reached to the substrate were observed along with these hafnium rich precipitates. On the other hand, the coated specimens treated at 1323K using low aluminum concentration pack showed the coating layer without the large hafunium rich precipitates, and after the high temperature oxidation test at 1273K for 1800 ksec, it did not show the deep localized corrosion. The nickel electroplating before the aluminizing forms thick hafnium free area, and its high temperature oxidation resistance were comparable to platinum modified aluminizing coatings at 1273K.