• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.342-345
• /
• 2000

Effect of volcanic ash on cell growth of Aspergillus sp. and production of exopolymers by Agrobacterium sp. and Aureobasidium pullualns was investigated. The volcanic ash contained various mineral salts such as $SiO_2$, $Al_2O_3$, CaO, $K_2O$. Maximal cell growth of Aspergillus sp. was obtained when 0.3% volcanic ash was added to medium. Cell growth of Aspergillus sp. increased with higher concentration of volcanic ash in medium. Amount of cell growth with 0.3 % volcanic ash was 6.7 times higher than that without volcanic ash. Volcanic ash also stimulated production of exopolymer as well as cell growth. Production of curdlan with 0.1% volcanic ash was 12.40 g/l whereas that without volcanic ash was 9.15 g/l. Production of pullulan with volcanic ash was also higher than that without volcanic ash.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.174-181
• /
• 2004

Multi-walled carbon nanotubes (CNTs) were prepared by thermal chemical vapor deposition (CVD) and microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts with four transition metals such as Fe, Co, Cu, and Ni. In the preparation of CNTs from acetylene precursor by thermal CVD, the CNTs with very high yield of 43.6 % was produced over $Fe-Co/Al_2O_3$. The highest yield of CNTs was obtained with the catalyst reduced for 3 hr and the yield was decreased with increasing reduction time to 5 hr, due to the formation of $FeAl_2O_4$ metal-aluminate. On the other hand, the CNTs prepared by acethylene plasma CVD had more straight, smaller diameter, and larger aspect ratio(L/D) than those prepared by thermal CVD, although their yield had lower value of 27.7%. The degree of graphitization of CNTs measured by $I_d/I_g$ value and thermal degradation temperature were 1.04 and $602^{\circ}C$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.668-668
• /
• 2013

CIGS 박막태양전지는 다른 박막태양전지에 비해 높은 에너지 변환효율을 보이고 있으며, 광범위한 기술 응용분야를 가지고 있다. CIGS를 광흡수층으로 하는 태양전지의 구조는 5개의 단위박막(배면전극, 광흡수층, 버퍼층, 앞면 투명전극, 반사방지막)을 순차적으로 형성시켜 만든다. 단위박막별로 다양한 종류의 재료와 조성, 또한 제조방법에서는 갖가지 물리적, 화학적 박막 제조방법이 사용된다. 현재 광흡수층인 CIGS층의 경우 동시증발법과 스퍼터링법이 높은 효율을 보이고 있다. 본 연구에서는 CIGS층을 3-stage process를 적용한 동시증발법을 사용하였고, Fluxmeter와 기판후면 온도 모니터링을 이용하여 제조하였으며, 버퍼층은 moving 스퍼터링 법으로 ZnS를 증착하였고, 투명전극층은 PLD (Pulsed Laser Deposition)를 이용하여 제조하였다. 가장 높은 광변환효율을 보인 Al/ZnO/CdS/Mo/SLG박막시료는 유효면적 0.45 $cm^2$에 광변환효율 15.71%, Jsc: 33.64 mA/$cm^2$, Voc: 0.64 V, FF: 73.18%를 얻을 수 있었으며, CdS를 ZnS로 대체한 Al/ZnO/ZnS/Mo/SLG 박막시료는 유효면적 0.45 $cm^2$에 광변환효율 12.13%, Jsc: 33.22 mA/$cm^2$, Voc: 0.60 V, FF: 62.85%를 얻을 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.461-462
• /
• 2008

$BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1349-1352
• /
• 2005

This paper is to investigate a defect for thermal barrier coating layers by acoustic emission method in 4-point bending test. The two-layer thermal barrier coating is composed of $150\mu{m}\;CoNiCrAlY\;bond\;coating\;by\;vacuum\;plasma\;spray(VPS)\;process\;and\;250\mu{m}\;ZrO_2-8wt%Y_2O_3$ ceramic coating layer by air plasma spray(APS) process on Inconel-718. The specimen prepared by cyclic thermal test(500, 1000, 2000cycle) at $1050^{\circ}C$ The AE monitoring system is composed of PICO type sensor, a wide band pre-amplifier(40dB), PC and AE DSP(16/32 PAC) board. The AE event, amplitude, Cumulative energy and count of coating specimens is evaluated according to cyclic thermal test.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.117-122
• /
• 2005

Electron Beam Physical Vapor Deposition (EB-PVD) is a typical technology for thermal barrier coating with Yttria Stabilized Zirconia (YSZ) on aero gas turbine engine. In this study EB-PVD method was used to fabricate dense YSZ film on NiO-YSZ as a electrolyte of Solid Oxide Fuel Cell (SOFC). Dense YSZ films of -10 $\mu$m thickness showed nano surface structure depending on deposition temperature. Electrical conductivities of YSZ film and electric power density of the single cell were evaluated after screen- printing $LaSrCoO_3$ as a cathode.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1102-1103
• /
• 2006

The pretreatment for substrate was carried out in change of gun pressure of $0.5\sim3.5$ bar using wet blasting. The size of $Al_2O_3$ powder was about $50{\sim}150{\mu}m$. As the results, the surface roughness of cemented carbide substrate was improved with increment of gun pressure of wet blasting. A new surface layer was formed and Co particles were uniformly distributed over the entire surface after pretreatment. The adhesion of the pretreated substrate in same PVD-TiAlN film was improved and in approximately $Ra=90\sim120\;nm$ shown the best adhesion value.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.186-191
• /
• 2001

Several fabrication processes, corresponding nanostructural features and multifunctionality as well has been investigated for oxide ceramic based nanocomposites with metal nanodispersion (i.e., ceramic/metal nanocomposites). Transition metal (Ni, Co, etc) dispersed alumina and zirconia based nanocomposites have been synthesized by reducing and hot-press sintering of ceramic and metal oxide mixtures prepared by several method. Improved fracture strength (1.1 and 1.9 GPa for $Al_2O_3/Ni$ and $ZrO_2/Ni$ nanocomposites, respectively) of these composites have been achieved according to their nanostructures. In addition, ferromagnetic characteristic has been kept. The variation of magnetization with an applied stress has found to be more sensitive as smaller as the magnetic metal dispersion is. This result thus suggests the possibility of fracture and/or stress sensing of the composites by simple magnetic measurement.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.324-328
• /
• 2009

The internal short-circuit between cathodes and anodes has been known to be a critical concern for the safety failures of lithium-ion batteries, which is strongly influenced by the thermal stability of separators. In this study, to effectively suppress the internal short-circuit failures, we developed a new composite separator with the improved thermal stability compared to conventional polyolefin-based separators. The composite separators were prepared by introducing a ceramic coating layer ($Al_2O_3$/PVdF-HFP) onto both sides of a polyethylene (PE) separator. The microporous structure of ceramic coating layers is determined by controlling the phase inversion of coating solutions and becomes more developed with the increase of nonsolvent (water) content. This structural change of ceramic coating layers was observed to greatly affect the thermal stability as well as the electrochemical performance of composite separators, which was systematically discussed in terms of phase inversion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.174-174
• /
• 2009

현재 전자부품용으로 사용되는 유리프리트의 경우 PbO계를 주로 사용하고 있다. 최근 환경규제에 따른 PbO 사용이 제한됨에 따라 이를 대체할 Pb-free 유리 조성에 대한 연구가 활발히 진행 중이다. Pb-free계로서는 $Bi_2O_3$계, $B_2O_3$계가 주로 연구되고 있으나 소성 온도가 $500^{\circ}C$이상으로 높고 또한 $Bi_2O_3$ 계는 중금속이기 때문에 문제가 있다. 본 연구에서는 $400^{\circ}C$ 미만 소성이 가능한 SnO-$P_2O_5$계를 기본 조성계로 선택하고 열적, 전기적, 화학적 특성을 개선하기 위해 $R_2O_3$(R=Al, B), RO(R=Mg, Zn, Ca, Ba) 를 첨가하였다. 개선된 조성으로 샘플을 만들고 이를 대상으로 실제 전자부품 생산 공정에 적용 실험을 진행 하였다. 실험에 사용된 전자 부품은 소형 칩 베리스터로 생산 공정에서 코팅용 유리프리트와 파우더를 절연체로서 전면에 코팅하게 된다. 유리프리트를 코팅함으로서 누설 전류를 차단하고 생산 공정시 베리스터 내부를 보호하게 된다. 실험에 사용된 샘플의 열적 특성은 TMA로, 전기적 절연 특성은 고 절연저항 측정기로 측정하였고 내 산성과 내 알칼리성도 측정하였다. 샘플을 이용하여 완성된 칩 베리스터의 성능은 고온, 내습 신뢰성 TEST(고온:$150^{\circ}C$ 12HR, 내습:$85^{\circ}C$-85%12HR)로 실험하여 합부판정 (Leakage current <10uA)을 내려 완성품과 불량품을 가려내었다.