• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.17-23
• /
• 2012

The heavy-fermion compound $CeRhIn_5$ is a prototypical antiferromagnet where Ce 4f moments align antiferromagnetically below 3.8 K. When doped with Hg, the antiferromagnetic transition $T_N$ initially decreases, becomes flat, and increases again with further increasing Hg concentration. Here we report pressure effects on the electrical resistivity of a 0.45 % Hg-doped $CeRhIn_5$, where $T_N$ is 3.4 K and the magnetic structure is same as that of the undoped compound with Q=(1/2, 1/2, 0.298). With increasing pressure, $T_N$ is suppressed and a superconducting state emerges. The temperature dependence of the electrical resistivity near an optimal pressure shows a power-law behavior that deviates from a $T^2$ dependence, indicating presence of abundant quantum fluctuations near the optimal pressure.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.131-137
• /
• 2005

The catalytic activity of precious metals(Rh, Pd, Pt) and nickel catalysts supported on ${\gamma}-Al_2O_3\;and\;CeO_2$ in the partial combustion of methane(PCM) to syngas was investigated based on the product distribution in a fixed bed now reactor under atmospheric condition and also on analysis results by SEM, XPS, TPD, BET, and XRD. The activity of the catalysts based on the syngas yield increased in the sequence $Rh(5)/CeO_2{\geq}Ni(5)/CeO_2>>Rh(5)/Al_2O_3>Pd(5)/Al_2O_3>Ni(5)/Al_2O_3$. Compared to the precious catalysts, the syngas yield and stability of the $Ni(5)/CeO_2$ catalyst were almost similar to $(5)/CeO_2$ catalyst, and superior to these of any other catalysts. The syngas yield of $Ni(5)/CeO_2$ catalyst was 90.66% at 1023 K. It could be suggested to be the redox cycle of the successive reaction and formation of active site, $Ni^{2-}$ and the lattice oxygen, $O^{2-}$ produced due to reduction of $Ce^{4-}$ to $Ce^{3-}$.

• Journal of Ginseng Research
• /
• v.45 no.6
• /
• pp.754-762
• /
• 2021

Background: Ginsenoside Rh2, a major saponin derivative in ginseng extract, is recognized for its anti-cancer activities. Compared to coding genes, studies on long noncoding RNAs (lncRNAs) and microRNAs (miRNAs) that are regulated by Rh2 in cancer cells, especially on competitive endogenous RNA (ceRNA) are sparse. Methods: LncRNAs whose promoter DNA methylation level was significantly altered by Rh2 were screened from methylation array data. The effect of STXBP5-AS1, miR-4425, and RNF217 on the proliferation and apoptosis of MCF-7 breast cancer cells was monitored in the presence of Rh2 after deregulating the corresponding gene. The ceRNA relationship between STXBP5-AS1 and miR-4425 was examined by measuring the luciferase activity of a recombinant luciferase/STXBP5-AS1 plasmid construct in the presence of mimic miR-4425. Results: Inhibition of STXBP5-AS1 decreased apoptosis but stimulated growth of the MCF-7 cells, suggesting tumor-suppressive activity of the lncRNA. MiR-4425 was identified to have a binding site on STXBP5-AS1 and proven to be downregulated by STXBP5-AS1 as well as by Rh2. In contrast to STXBP5-AS1, miR-4425 showed pro-proliferation activity by inducing a decrease in apoptosis but increased growth of the MCF-7 cells. MiR-4425 decreased luciferase activity from the luciferase/STXBP5-AS1 construct by 26%. Screening the target genes of miR-4425 and Rh2 revealed that Rh2, STXBP5-AS1, and miR-4425 consistently regulated tumor suppressor RNF217 at both the RNA and protein level. Conclusion: LncRNA STXBP5-AS1 is upregulated by Rh2 via promoter hypomethylation and acts as a ceRNA, sponging the oncogenic miR-4425. Therefore, Rh2 controls the STXBP5-AS1/miR-4425/RNF217 axis to suppress breast cancer cell growth.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.541-548
• /
• 2018

In this work, the $N_2O$ decomposition catalyst and reaction characteristics to control the $N_2O$ removal were described. Experiments were carried out by using Rh as an active metal catalyst on various supports and the $Rh/CeO_2$ catalyst with $CeO_2$ support showed the best activity for the $N_2O$ decomposition when it was prepared under the constant heat treatment condition ($500^{\circ}C$-4 hr). $H_2-TPR$ and XPS analyzes were performed to confirm the effect of the physical and chemical properties of the catalyst on $N_2O$ decomposition. As a result, it was found that the increase of the oxygen transfer capacity of the catalyst due to the increase of both the redox property and $Ce^{3+}$ amount affected the decomposition reaction of $N_2O$. In addition, the future work will include a treatment process capable of decomposition $N_2O$ and NO under the condition that $N_2O$ and NO are simultaneously generated and its characteristics of $N_2O$ decomposition reaction.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.17-17
• /
• 2009

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.601-606
• /
• 2001

A simple assay method of recombinant human epidermal growth factor (rhEGF) in a pharmaceutical preparation was studied and validated by capillary electrophoresis (CE) using micellar electrokinetic chromatography (MEKC) techniques. Factors affecting the migration behavior and separation performances of the peptide; type of buffers pH, butler concentration, and concentration of sodium dodecyl sulfates (SDS) were investigated to optimize the analytical performance. CE was performed using running buffers 50.0 mM borate (pH 8.5) containing 12.5 mM SDS at 20 $mutextrm{V}$ of the applied voltage. Calibration curves for the rhEGF showed good linearity (r>0.999) over the wide dynamic range from 1.25 to $100{\mu\textrm{g}}/ml$. Sample analysis was performed by using standard addition method to eliminate the matrix effects of dosage vehicle. This method is assumed to be useful for quality control (QC) of various forms of pharmaceutical products of the peptide.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.102-106
• /
• 1999

Ce exhibits the intermediate valence (IV) state both as an element and in its compounds. In the present review characteristic behavior of the materials showing the IV state are described. Then the methods of producing this state : the application of the external pressure, temperature and magnetic field as well as the alloying are being discussed. An identification of the IV state is frequently not a simple goal and the best results can be obtained using a combination of various independent methods. Particular attention is paid to the X-ray spectroscopy, lattice parameters and the magnetic properties. As the examples of the IV state in the Ce compounds the properties of following materials are reported : CeRhSb, $CeCu_5In_7, CeAg_6In_6, Sc_{1-x}Ce_xFe_4Al_8 $and for comparison Sc1-xYbxFe4Al8.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.692-696
• /
• 1992

$NH_4^+ form cation exchange resin was used to separate one rare earth element from the rare earth mixture solution using Ln-EDTA eluent. Rare earth mixture solution was passed through the resin bed and eluted with 0.1M La-EDTA solution as an eluent. In here all the rare earth element except lanthanum ion are eluted and lanthanum ion absorbed in resin bed is eluted using 0.1M EDTA solution. If Ce-EDTA solution instead of La-EDTA solution was used as an eluent, all the rare earth element except cerium ion are eluted and cerium ion is eluted with 0.1M EDTA solution. This method can be applied to separate the individual rare earth element from the mixture. The separation mechanism is as follows: Absorption : 3RNH_4 ＋ Ln^{3+} = R_3Ln ＋ 3NH_4^+, La-EDTA elution : R_3Ln ＋ La-Y- = R_3La ＋ Ln-Y-, EDTA elution : R_3La ＋ HY^3- = La_-Y ＋ RH ＋ 2R^-.$

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.446-452
• /
• 2000

The simulated nuclear spent fuel (SIMFUEL) containing the platinum group elements which will not be dissolved in a nitric acid was completely dissolved with a acid digestion bomb. The metallic elements separated in the SIMFUEL were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES). Because the peaks of metallic elements were spectrally interfered by uranium spectrum, uranium and metallic elements were separated by cation exchange resin for Mo, Pd, Rh and Ru and by anion exchange resin for Ba, Ce, La, Nd, Rh, Sr, Y and Zr, respectively. The recovery of Mo, Pd, Rh and Ru after separation by cation exchange chromatography found to be 99-103% and anion exchange separation showed 96.5-107% of recovery except Y with the simulated solution whose concentration was similar to the spent nuclear fuel. The relative standard deviation of this method showed 1.3-6.7% in the SIMFUEL whose concentrations of metallic elements were between several $10^2-10^3$ppm.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.421-428
• /
• 1998

A method has been studied to separate Zr from various fission products in PWR spent nuclear fuels. A solution containing metal ions in place of radioactive fission products was prepared. The Zr was separated with 5 M HCl followed by eluting metal ions such as Ce, Nd, Cs, Rb, Ba, Sr, Ru, Rh, Pd, Ag and Cd with 12 M HCl on Dowex $1{\times}8$, anion exchange resin. The recovery of Zr was more than 95%. The purification of Zr was carried out on anion exchange resin, Dowex $1{\times}8$, in 5 M HCl in order to remove Mo causing isobaric effect during mass spectrometry. The method was applied to separate Zr from a spent PWR fuel. From mass spectrometric measurement, the purified Zr portion was not showed the isobars from other elements such as Mo and Sr.