• 한국초전도ㆍ저온공학회논문지
• /
• 제5권3호
• /
• pp.1-5
• /
• 2003

The effect of CeO$_2$ coating on the surface nucleation of the top-seeded melt-growth processed YBCO superconductors was studied. It was effective that the coating of Y123 compact surfaces by CeO$_2$ powder suppressed the undesirable subsidiary YBa$_2$Cu$_3$O$_{7-y}$ (Y123) nucleation during melt processing. BaCeO$_3$ was formed in the CeO$_2$-coated layers, which might cause a CuO-excessive liquid at the partial melt stage of $Y_2$BaCuO$_{5}$(Y211) plus liquid, and thus the Y123 nucleation at the YBCO compact surfaces could be suppressed during the melt growth of Y123 grain. In addition, the CeO$_2$ refined the Y211 particles near the compact / coating interface. While the levitation forces of the top surfaces with and without CeO$_2$ coating were similar to each other, the levitation force of the interior of the CeO$_2$ coated sample was higher than that of the interior of the sample without CeO$_2$ coating, which was attributed to the suppression of subsidiary Y123 nucleation at the compact walls.s.s.

• 공업화학
• /
• 제25권3호
• /
• pp.312-317
• /
• 2014

공침전법으로 제조된 CuO-$CeO_2$ 혼합산화물 촉매에서 벤젠의 촉매연소 반응에 대해 연구하였다. CuO-$CeO_2$ 혼합산화물 촉매들은 침전제 및 CuO 전구체를 달리하여 제조하였고, XRD, BET, XPS 및 $H_2-TPR$에 의해 특성분석을 하였다. 침전제의 종류에 상관없이 CuO 피크가 $2{\Theta}=35.5^{\circ}$와 $38.5^{\circ}$에서 뚜렷하게 나타났다. $NH_4OH$를 침전제로 사용하여 제조한 Cu/(Cu+Ce)의 몰비율이 0.35인 촉매가 가장 높은 활성을 보여주었다. 또한, 수소로 전처리하면 벤젠 연소반응의 활성이 증가하였고, $400^{\circ}C$에서 수소로 전처리한 촉매가 가장 높은 활성을 보여주었다.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.455-463
• /
• 2021

In this study, CeO₂ support is synthesized from cerium hydroxy carbonate prepared using precipitation/digestion method using KOH and K₂CO₃ as the precipitants. The Cu was impregnated to CeO₂ support with the different loading (Cu loading=10-40 wt. %). The prepared Cu/CeO₂ catalysts were applied to a single stage water gas shift (WGS) reaction. Among the prepared catalysts, the 20Cu/CeO₂ catalyst contained 20 wt.% of Cu showed the highest CO conversion (Xco=68% at 400℃). This result was mainly due to a large amount of active sites. In addition, the activity of the 20 Cu/CeO₂ catalyst was maintained without being deactivated for 100 hours because of the strong interaction between Cu and CeO₂. Therefore, it was confirmed that 20 Cu/CeO₂ is a suitable catalyst for a single WGS reaction.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 추계학술발표회요약집
• /
• pp.267-267
• /
• 1998

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.145-152
• /
• 2006

The densification behavior and electrical conductivity of $Ce_{0.8}Gd_{0.2}O_{1.9}$ ceramics were investigated with the strontium gallate concentration ranging from 0 to $5\;mol\%$. Both the sintered density and grain size were found to increase rapidly up to $0.5\;mol\%$ $Sr_2Ga_2O_5$, and then to decrease with further addition. Dense $Ce_{0.8}Gd_{0.2}O_{1.9}$ ceramics with $97\%$ of the theoretical density could be obtained for $0.5\;mol\%$ $Sr_2Ga_2O_5$-added specimen sintered at $1250^{\circ}C$ for 5 h, whereas pure $Ce_{0.8}Gd_{0.2}O_{1.9}$ ceramics needed to be sintered at $1550^{\circ}C$ in order to obtain an equivalent theoretical density, Electrical conductivity was measured as a function of dopant content, over the temperature range of $350\;-\;600^{\circ}C$ in air. Total conductivity of $0.5\;mol\%$ $Sr_2Ga_2O_5$-added specimen showed the maximum conductivity of $2.37{\times}10^{-2}{{\Omega}-1}{\cdot}cm^{-1}$ at $500^{\circ}C$, The addition of strontium gallate was found to promote the sintering properties and electrical conductivities of $Gd_2O_3$-doped $CeO_2$.

• 공업화학
• /
• 제26권2호
• /
• pp.193-198
• /
• 2015

다양한 상용 $TiO_2$ 담체를 이용한 Ce/Ti 촉매를 습윤함침법으로 제조하여 $TiO_2$의 물리화학적 특성 및 선택적촉매환원(SCR) 반응활성과의 상관관계에 관하여 연구하였다. $TiO_2$의 특성은 XRD, BET, XPS 및 pH와 같은 물리화학적 분석을 통해 수행되었다. Ce/Ti 촉매는 $TiO_2$의 물리화학적 특성에 따라 각기 다른 SCR 활성을 나타내었다. $TiO_2$의 비표면적이 증가됨에 따라 우수한 활성을 나타내었다. CeOx surface density의 경우 $2.5{\sim}14.5CeOx/nm^2$의 범위에서 우수한 활성을 보였으며, $14.5CeOx/nm^2$ 이상에서는 활성이 감소하는 경향을 나타내었다. $TiO_2$의 O/Ti mole ratio는 1.32~1.79의 범위에서 우수한 활성을 나타내었으며, $TiO_2$의 pH의 경우 SCR 활성과 영향이 없음을 확인하였다. 우수한 SCR 활성을 위해서는 세리아 산화물을 높은 비표면적 및 일정 O/Ti mole ratio를 가진 $TiO_2$에 담지되어야 하고 고분산된 세리아 산화물에 의한 낮은 CeOx surface density를 나타내는 촉매를 제조하여야 한다.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.500-505
• /
• 2016

Scandia-stabilized zirconia co-doped with $CeO_2$ is a promising electrolyte for intermediate temperature SOFC, but still shows rapid degradation during a long-term operation. In this study, $CeO_2$ (1 mol%) as a stabilizer is partially substituted with lanthanum oxides ($M_2O_3$, M=Yb, Gd, Sm) to stabilize a cubic phase and thus durability in reducing atmosphere. 0.5M0.5Ce10ScSZ electrolytes were prepared by solid state reaction and sintered at $1450^{\circ}C$ for 10 h to produce dense ceramic specimens. With addition of the lanthanum oxide, 0.5M0.5Ce10ScSZ showed lower degradation rates than 1Ce10ScSZ. Since $Gd_2O_3$ showed the highest ionic conductivity among the co-dopants, an electrolyte-supported cell with 0.5Gd0.5Ce10ScSZ was prepared to compare its long-term performance with that of 1Ce10ScSZ-based cell. Maximum power density of 0.5Gd0.5Ce10ScSZ-based cell was degraded by about 2.3% after 250 h, which was much lower than 1Ce10ScSZ-based cell (4.2%).

• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.29-36
• /
• 2010

The effects of La addition to Ni/$CeO_2$ methane partial oxidation catalysts were investigated. Catalysts were prepared by the impregnation and urea methods. In the preparation of catalysts, La content was changed from 1 wt% to 3wt%. Catalysts that contain 2wt% La showed the highest methane conversion of about 80% and CO selectivity of 84% and $H_2$ selectivity of 70%. This result may be stemmed from that, when La content is 2wt%, a fluorite oxide-type structure is well formed and carbon deposition is also decreased. Among the catalysts, 2.5wt% Ni/Ce(La)Ox showed the highest catalytic activity. From the experiment of changing reaction temperature with 2.5wt% Ni/Ce(La)Ox catalyst, it was found that the optimum reaction temperature is $750^{\circ}C$ and at this temperature methane conversion was about 90%, CO and $H_2$ selectivities were 94 and 80%, respectively.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.101-107
• /
• 2013

재생 세륨 전구체로부터 수산화세륨($Ce(OH)_3$), 염화세륨($CeCl_3{\cdot}nH_2O$), 탄산세륨($Ce_2(CO_3)_3{\cdot}8H_2O$) 및 산화세륨($CeO_2$)을 합성하고 Ultra-sonication을 통해 나노입자의 산화세륨(IV)을 제조하였다. 폐 유리연마재로부터 정제한 약 99 wt% 재생 세륨 분말을 출발물질로 하여 황산침출과 황산나트륨의 첨가조건을 통해서 황산나트륨세륨 화합물($CeNa(SO_4)_2$)을 합성하였다. 또한 황산나트륨세륨 화합물과 수산화나트륨 수용액 첨가량 비의 조건을 달리하여 수산화세륨을 제조하였으며 염산의 첨가량에 따라 염화세륨을 합성하였다. 연속적인 합성공정으로 침상형의 탄산세륨을 합성한 후 하소와 분산을 통해서 평균 30~40 nm의 산화세륨(IV)을 합성하였다.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.640-646
• /
• 2012

The effect of Ce promotion over 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts on the CO conversion and $CO_2$ selectivity was investigated in preferential CO oxidation (PrOx) to reduce the CO concentration less than 10 ppm in excess $H_2$ stream for polymer electrolyte membrane fuel cell (PEMFC). Ce-promoted 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts were prepared by incipient wetness impregnation method and the loading amount of Pt was fixed at 1wt%. The content of Ce promoter which has excellent oxygen storage and transfer capability due to the redox property was adjusted from 0 to 1.5wt%. Ce-promoted 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts exhibit high CO conversion and $CO_2$ selectivity at low temperatures below $150^{\circ}C$ due to the improvement of reducibility of surface PtOx species compared with the 1wt% $Pt/{\gamma}-Al_2O_3$ catalyst without Ce addition. When Ce content was more than 1wt%, the catalytic activity was decreased at over $160^{\circ}C$ in PrOx because of competitive $H_2$ oxidation. As a result, 0.5wt% Ce is optimal content not only to achieve high catalytic activity and good stability at low temperatures below $150^{\circ}C$ in the presence of $CO_2$ and $H_2O$ but also to minimize the $H_2$ oxidation at high temperatures.