• Biomolecules & Therapeutics
• /
• v.15 no.4
• /
• pp.212-217
• /
• 2007

In atrial myocytes, lacking t-tubules, $Ca^{2+}$ current ($I_{Ca}$)-initiated $Ca^{2+}$ release at the peripheral junctional sites propagates into the interior of the cell by diffusion of $Ca^{2+}$. We have previously reported that time of activation of the central sites is independent of $I_{Ca}$. In the present study we have probed the effects of Bay K 8644 on $Ca^{2+}$ propagation wave to the center of the myocyte using rapid 2-D confocal $Ca^{2+}$ imaging in the rat atrial myocytes. Enhancement of $I_{Ca}$ by Bay K 8644 accelerated the rate of peripheral $Ca^{2+}$ release, but did not affect the speed of propagation of central release. In contrast, enhancement of $I_{Ca}$ by intracellular cAMP reduced the magnitude of peripheral and central $Ca^{2+}$ transients, but significantly accelerated the speed of central $Ca^{2+}$ release. Our data suggest that the speed of central $Ca^{2+}$ propagation triggered by $I_{Ca}$ is not regulated by the magnitude of either $I_{Ca}$ or local cytosolic $Ca^{2+}$ releases.

• YAKHAK HOEJI
• /
• v.48 no.6
• /
• pp.352-357
• /
• 2004

Atrial myocytes have two functionally separate groups of ryanodine receptors (RyRs): those at the periphery colocalized with L-type $Ca^{2+}$channels (DHPRS) and those a t the cell interior not associated with DHPRs. $Ca^{2+}$ current ($I_{ca}$) directly gates peripheral RyRs on action potential and the subsequent peripheral $Ca^{2+}$ release propagates into the center of atrial myocytes. The mechanisms that regulate the $Ca^{2+}$+ propagation wave remain Poorly understood. Using 2-D confocal$Ca^{2+}$ imaging, we examined the role of inositol 1,4,5-trisphosphate receptor (IP $_3R$) and mitochondria on ($I_{ca}$)- gated local $Ca^{2+}$ signaling in rat atrial myocytes. Blockade of IP $_3R$ by xestospongin C (XeC) partially suppressed the magnitudes of I ca-gated central and peripheral $Ca^{2+}$ releases with no effect on $I_{ca}$. Mitochondrial staining revealed that mitochondria were aligned with ${\thickapprox}2-{\mu}m$ separations in the entire cytoplasm of ventricular and atrial myocytes. Membrane depolarization induced rapid mitochondrial $Ca^{2+}$ rise and decay in the cell periphery with slower rise in the center, suggesting that mitochondria may immediately uptake cytosolic $Ca^{2+}$, released from the peripheral SR on depolarization, and re-release the $Ca^{2+}$ into the cytosol to activate neighboring central RyRs. Our data suggest that the activation of IP $_3R$ and mitochondrial $Ca^{2+}$ handing on action potential may serve as a cofactor for the $Ca^{2+}$ propagation from the DHPR-coupled RyRs to the DHPR-uncoupled RyRs with large gaps between them.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.610-614
• /
• 2000

Cellular Automata(CA)s are used as a simple mathematical model to investigate self-organization in statistical mechanics, which are originally introduced by von Neumann and S. Ulam at the end of the 1940s. CAs provide a framework for a large class of discrete models with homogeneous interactions, which are characterized by the following fundamental properties: 1) CAs are dynamical systems in which space and time are discrete. 2) The systems consist of a regular grid of cells. 3) Each cell is characterized by a state taken from a finite set of states and updated synchronously in discrete time steps according to a local, identical interaction rule. 4) The state of a cell is determined by the previous states of a surrounding neighborhood of cells. A cellular automaton has been attracted wide interest in modeling physical phenomena, which are described generally, partial differential equations such as diffusion and wave propagation. This paper describes one and two-dimensional analysis of wave propagation phenomena modeled by CA, where the local interaction rules were derived referring to the Lattice Gas Model reported by Chen et al., and also including finite difference scheme. Modeling processes by using CA are discussed and the simulation results of wave propagation with one wave source are compared with that by finite difference method.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.103-106
• /
• 1997

In order to establish a micropropagation system of Naricissus, the ability of bulblet regeneration among propagation materials was compared, and the adequate growth regulators and concentrations for each cultivar were investigated. The inorganic components were also assayed in the parts of propagation materials. In propagation materials, scape with based plates showed hightest rate of bulblet formation and rapid growth of formed bulblets in vitro, comparing to other parts of it. In comparing of varieties, 'Dutch Master' and 'Golden Harvest' showed a high ability for bulblet regeneration. The ability of bulblet regeneration was most favorable in the medium, supplemented with 5.0 mg/L BA and 2.5 mg/L NAA in 'Dutch Master', and 5.0 mg/L BA and 1.0mg/L NAA in 'Golden Harvest', respectively. In inorganic component analysis of propagation materials, the White part of scape contained 1.18 mg/L$P_2O_5$, 2.57 me Ca, 0.94 me Mg and 3.20 mg/L total N. It showed higher levels in concentration of inorganic components as compared to those of the other part of scape. In addition, leaves and yellow part of scape contained significantly high levels of Ca and Mg while scales bulb showed considerably low levels in all inorganic compounds.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.63-70
• /
• 1992

$AI_2O_3/Ca-TZP$ composites was prepared by using the starting powder of alumina and Ca-TZP synthesized by hydrothermal reaction and investigated to its characteristics. The ratio of tetragonal zirconia to monoclinic within $AI_2O_3$ matrix was decreased with an addition of Ca-TZP content, but the absolute amount of tetragonal phase in composites was increased with an addition of Ca-TZP content. The value of fracture toughness in $AI_2O_3/Ca-TZP$composites was proportional to the amounts of transformed tetragonal phase which formed by crack propagation in fracture, and therefore, it was gradually increased with an addition of Ca- TZP content.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.525-526
• /
• 2006

Calcium-hexaluminate phase $(CA_6)$ is known to be effective for the crack shielding due to the spinel block crystal structure. In this study, we focused to the control of $CA_6$ morphology for good damage tolerance behavior in alumina and zirconia/calcium-hexaluminate $(CA_6)$ composites. Calcium-hexaluminate $(CA_6)$ composites were prepared from zirconia, alumina and calcium carbornate powders. Calcium-hexaluminate $(CA_6)$ phase was obtained by the solid reaction through the formation of intermediate phase $(CA_2)$. $CA_6$ phase showed the column type abnormal grain grown behavior composed of small blocks. Due to the typical microstructure of $CA_6$, alumina and zirconia/calcium-hexaluminate composites provide a well controlled crack propagation behavior.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.12-19
• /
• 2008

This study was conducted to investigate the draft data for the habitat environment and massive propagation method of Miscanthus changii, which is classified as rare species. The in-site analysis of the native soil give a indication of pH 5.24~5.48, electric conductivity (EC)0.03~0.02 $dS{\cdot}m^{-1}$, organic matter (OM) 1.13~1.15%, Ca 3.4 $mg{\cdot}kg^{-1}$, K 0.25 $mg{\cdot}kg^{-1}$, Mg 0.53 $mg{\cdot}kg^{-1}$, N 0.23%, P 2.15 $mg{\cdot}kg^{-1}$ showed low and 0.33~9.12 $cmol{\cdot}kg^{-1}$ CEC. Growth and tiller number in rhizome propagation of Miscanthus changii showed that horticulture media (perlite 1+vermiculate 1+peat moss 1) is the most suitable soil to habitat. As for seed propagation, germination percentage is 0% (0/20) at first seeding, 2% (1/50) at second seeding and 2.1% (6/280) at third seeding. The average germination percentage was below 2%. This is the reason why Miscanthus changi disappear at habitat of poor soil environment and low germination. We gained 61 plants that 60 rhizome propagation and 1 by seed propagation, renatural to habitat.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.279-284
• /
• 2002

To establish the mass propagation method of Typha orientatis Presl, several factors influencing seed germination were investigated. The best seed germination of T. orientalis was achieved under the light and 25~3$0^{\circ}C$ temperature. GA$_3$ tended to enhance seed germination, and 500 mg.L$^{-1}$ GA$_3$ showed 90.7% germination, which was 1.2 times of control. Compared to control, BA treatment prohibit seed germination. Especially, seeds were not germinated under 500 mg.L$^{-1}$ BA treatment. In case of KNO$_3$ and Ca(NO$_3$)$_2$ treatment, the germination rate was decreased by all concentrations, except 100 mM Ca(NO$_3$)$_2$.

• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.148-155
• /
• 1997

Ths signal processing technqiue of FET type electrolyte sensors using the back propagation neural network was studied to reduce the interference effects of the different electrolytes. The FET-type electrolyte sensors, pH-ISFET, K-ISFET, and Ca-ISFET, were prepared to measure the pH, K, and Ca electrolytes. Neural network consisted of three layers was learned with 8 patterns and 9 patterns. The sensor output obtained with arbitrary concentrations was processed by the learned neural network. The errors obtained from calibration curve for pH, K, and Ca were .+-.0.039 pH, .+-.2.508 mmol/l, and .+-.1.807 mmol/l, respectively, without considering the interference effects. The errors of the network output for pH, K, and Ca were reduced to .+-.0.005 pH, .+-.0.436 mmol/l, and .+-.0.381 mmol/l in case of 9 patterns, respectively. the signal processing using the neural network can reduce the errors ofthe electrolyte sensor outputs caused by the interference effect, thereby providing effectiveness in the improvement of the sensor selectivity.