• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.9
• /
• pp.397-402
• /
• 2005

The ($Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films are deposited on Pt-coated electrode (Pt/TiN/SiO$_{2}$Si) using RF sputtering method with substitutional contents of Ca. The optimum conditions of RF power and Ar/O$_{2}$ ratio were 140(W) and 80/20, respectively. Deposition rate of SCT thin film was about $18.75{\AA}$/min. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over $15[mol\%]$. The capacitance characteristics had a stable value within $\pm4[\%]$ in temperature ranges of $-80\~+90[^{\circ}C]$. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200[kHz].

• Ocean and Polar Research
• /
• v.30 no.3
• /
• pp.351-359
• /
• 2008

In an effort to develop high-resolution sea surface temperature (SST) proxies for mid-latitude regions, two massive reef-building coral species, Alveopora and Favia, were collected from Jeju and Tsushima Islands, respectively. Their skeletons were subsequently analyzed for annual growth banding, Sr/Ca and Mg/Ca ratios. Hermatypic corals are thinly distributed in the waters of Jeju Island, where Alveopora japonica was the only dominant coral species. A higher diversity of hermatypic corals were observed in the waters of Tsushima Island, where Favia sp. was the most common coral species and even forming an about 6-m-high reef structure. Both Alveopora and Favia showed annual growth layers consisting of couplets of high- and low-density bands. Sr/Ca ratio of both species and Mg/Ca ratio of Alveopora also showed seasonal variation, likely reflecting SST variation. These results suggest the possibility that Alveopora and Favia species can be used as potential SST proxies. However, this study also highlights the potential growth disturbance of middle latitude corals due to high rainfall during monsoon and low SST during winter. This possibility should be taken into account in the investigation of Sr/Ca(Mg/Ca)-SST relationships.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.460-465
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$(x=1.10,0.15,0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of he composition ratio and sintering temperature were studied. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around 102$0^{\circ}C$ due to the formation of the polycrystalline perovskite phase. The BSCT(50/40/10) specimen sintered at 150$0^{\circ}C$ showed the highest average grain size(18.25${\mu}{\textrm}{m}$). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 145$0^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively.ively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.11
• /
• pp.550-554
• /
• 2001

$(Ba_{0.6}Sr_{0.4}Ca_x)TiO_3 + yAl_2O_3$ wt% (x=0.10, 0.15, 0.20, y=0~3.0) ceramics were fabricated by the mixed-oxide method, and their structural and dielectric properties were investigated with variation of composition ratio and $Al_2O_3$ doping content. As results of the X-ray diffraction and microstructure analysis, all BSCT specimens showed dense and homogeneous structure without presence of the second phase. The sintered density was decreased with an increase of $Al_2O_3$ doping content. The Curie temperature and relative dielectric constant at room temperature were decreased with increasing $Al_2O_3$doping content. The dielectric loss is minimum at BSCT doped with 1.5wt% $Al_2O_3$content. The tunability was decreased with increasing an Ca content and the BSCT(50/40/10) specimen doped with 2.0wt% $Al_2O_3$content showed the maximum value of 4.2%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.79-82
• /
• 2002

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$ + ywt% MgO (x=0.10, 0.15, 0.20, y=0.0~3.0) ceramics were fabricated by the conventional solid-state reaction, and their structural and dielectric properties were investigated with variation of composition ratio and MgO doping content. A second phase, representative of MgO, appears in 3wt% MgO-doped BSCT specimens. Average grain sizes decreased with increasing amounts of MgO, and the BSCT(40/40/20) specimens doped with 3wt% MgO showed a value of $9.3{\mu}m$. The Curie temperature and relative dielectric constant at room temperature were decreased with increasing MgO doping content and Ca composition ratio. The relative dielectric constant was non-linearly decreased as the field strength is increased. The tunability was increased with decreasing a Ca content and the BSCT(50/40/10) specimen doped with 1.0wt% MgO content showed the highest value of 6.4% at 5kV/cm.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.151-162
• /
• 2015

The adsorption characteristics of Sr ions and Cs ions in single and binary solution by zeolite A were investigated in batch experiment. The adsorption rate of Sr ions and Cs ions by zeolite A obeyed pseudo-second-order kinetic model in single and binary solution. The initial adsorption rates (h) and adsorption capacities of both ions obtained from pseudo-second-order kinetic model, and the values were decreased with increasing concentration of the competitive ions (0~1.5 mM). Also, adsorption isotherm data in binary solution were well fitted to the extended Langmuir model, the maximum adsorption capacities of Sr and Cs calculated from the model were 1.78 mmol/g and 1.64 mmol/g, respectively. The adsorption of Sr and Cs ions by zeolite A was carried out in the presence of other cations such as $Na^+$, $K^+$, $Mg^{2+}$ and $Ca^{2+}$. The results showed that the zeolite A can maintain a relatively high adsorption capacity for Sr and Cs ions and exhibits a high selectivity in the presence of competitive cations. The effect of competition had an order of $Ca^{2+}$ > $K^+$ > $Mg^{2+}$ > $Na^+$ for Sr ions and $K^+$ > $Ca^{2+}$ > $Na^+$ > $Mg^{2+}$ for Cs ions at the same cation concentration.

• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.21-34
• /
• 1989

Chindong granites are classified into granodiorite, tonalite and quartz-diorite, and Yucheon - Eonyang granites into monzo-granite by the Streckeisen diagram. These granitic rocks of Cretaceous age show trend of calc-alkaline magma, and the magmatic evolution from basic to acidic rocks is consistant with the general crystallization path of the Cretaceous granitic rocks in the Gyeongsang basin. On the basis of petrological and petrochemical data, variation of major elements (K, Na, Ca, Mg) and trace elements (Rb, Sr, Ba) including ore metals (Cu, Pb, Zn) in the Cretaceous granitic rocks were studied in detail in order to investigate geochemical difference of the granitic rocks in relation to mineralization between Cu province and Pb-Zn province in the Gyeongsang basin. There is clear difference in content of the major elements between Chindong granites and Yucheon-Eonyang granites : Chindong granites have low content of K (1.62%) and Na (2.53%), and high content of Ca (3.75%) and Mg (1.42%) whereas Yucheon-Eonyang granites have high content of K (3.56-3.60%), and low content of Ca (0.96-0.26%) and Mg (0.26-0.21%). There is also clear difference in content of trace lithophile elements between Chindong granites and Yucheon-Eonyang, granites : Chindong granites have low content of Rb (86ppm) and Ba (330ppm), and high content of Sr (405ppm) while Yucheon-Eonyang, granites have high content of Rb (144-161ppm) and Ba (983-1030ppm), and low content of Sr (157-136ppm). The lithophile trace elements of Rb and Sr vary with close relationship to major elements of K and Ca, respectively. Therefore, Chindong granites are much easily distinguished from Yucheon-Eonyang granites by using relationship of K with Rb and Ca with Sr : K<3%, Rb<100ppm, Ca<2% and Sr>200ppm for Chindong granites, and K>3%, Rb>100ppm, Ca<2%, and Sr<200ppm for Yucheon-Eonyang granites. There is not clear difference in content of trace ore metals between Chindong granites and Yucheon-Eonyang granites : Chindong granites of the Cu province have low Cu content (15ppm) which is nearly equal to 13-14ppm of Yucheon-Eonyang granites of the Pb-Zn province, and Yucheon-Eonyang granites have Pb content (29-27ppm) which is rather lower than 37ppm of Chindong granites. But Cu is anomalously high in the mineralized part of Chindong granites in Gunbuk-Haman area, and Zn is apparently higher in Yucheon-Eonyang granites (51-37ppm) than in Chindong granites (29ppm). K/Pb ratio is also c1early distinguishable between Chindong granites (<850) and Yucheon-Eonyang granites (>850). Thus, it may be possible to apply geochemical difference of the granites to distinguish whether a Cretaceous granitic body is Cu related rock or Pb-Zn related rock, and whether it belongs to Cu province or Pb-Zn province in the Gyeongsang basin.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2004.05a
• /
• pp.455-456
• /
• 2004

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.338-341
• /
• 2002

$(Ba_{1-x}Sr_{0.4}Ca_x)TiO_{3}$ (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. Their structural and dielectric properties were investigated with variation of composition ratio and $Al_{2}O_{3}$ doping contents. As results of the X-ray diffraction and microstructure analysis, the grain size of BSCT thick films was decreased with increasing $Al_{2}O_{3}$ amount. The thickness of BSCT thick films by 4-coating/drying is about $110{\sim}120{\mu}m$. The tunability increased with decreasing Ca content, and the BSCT(50/40/10) specimen doped with 1.0wt% $Al_{2}O_{3}$ showed the highest value of 12.94% at 5kV /cm.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.41-45
• /
• 2012

Oxynitride green phosphors for white light emitting diodes (LEDs) were synthesized and their optical properties were evaluated. The N/O ratio ($\delta$) of $SrSi_2O_{2-{\delta}}N_{2+2/3{\delta}}:Eu^{2+}$ closely depended on the synthesizing conditions. The most excellent green emission (545 nm), which was assigned to the $5d{\rightarrow}4f$ transition of $Eu^{2+}$ ions, was achieved at the conditions of $1700^{\circ}C$, 5 mol% $Eu^{2+}$, and $H_2$ atmosphere. The well-developed $Ca-{\alpha}-SiAlON:Yb^{2+}$ particles with homogeneous size were obtained at m = 3 (n = 0.15) for the compound of $Ca_{0.5m-0.005}Yb_{0.005}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$, resulting in the strong green emission at around 550 nm.