• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.255-259
• /
• 2004

Post-infectional biochemical changes due to Xanthomonas campestris pv. mori (Xcm) infection in five elite mulberry varieties viz., $S_1$, $S_{1635}$, $V_1$, RF $S_{175}$ and JRH was studied under inoculated condition. It was revealed that total soluble sugar and protein content was significantly declined in all the varieties due to X. campestris infection. Total phenol content was at par prior to inoculation in all varieties, but it was significantly increased in $S_1$, RF $S_{175}$, $S_{1635}$ and JRH 7 days after inoculation. The correlation coefficient (r) between total soluble sugar and total phenol content was found positive (r = 0.825) and statistically significant. Similarly, correlation coefficient (r) between total soluble protein and phenol content was found positive (r = 0.897) and statistically significant. The present study indicates that X. campestris infected leaves are nutritionally inferior in quality and the duration of phenol production in a mulberry variety play decisive role on disease resistance.nce.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.41-50
• /
• 2017

The purpose of this study were to evaluate the effect of best management practices (BMPs) of Haean highland agricultural catchment ($62.8km^2$) under future climate change using SWAT (Soil and Water Assessment Tool). Before future evaluation, the SWAT was setup using 3 years (2009~2011) of observed daily streamflow, suspended solid (SS), total nitrogen (T-N), and total phosphorus (T-P) data at three locations of the catchment. The SWAT was calibrated with average 0.74 Nash and Sutcliffe model efficiency for streamflow, and 0.78, 0.63, and 0.79 determination coefficient ($R^2$) for SS, T-N, and T-P respectively. Under the HadGEM-RA RCP (Representative Concentration Pathway) 4.5 and 8.5 scenarios, the future precipitation and maximum temperature showed maximum increases of 8.3 % and $4.2^{\circ}C$ respectively based on the baseline (1981~2005). The future 2040s and 2080s hydrological components of evapotranspiration, soil moisture, and streamflow showed changes of +3.2~+17.2 %, -0.1~-0.7 %, and -9.1~+8.1 % respectively. The future stream water quality of suspended solid (SS), total nitrogen (T-N), and total phosphorus (T-P) showed changes of -5.8~+29.0 %, -4.5~+2.3 %, and +3.7~+17.4 % respectively. The future SS showed wide range according to streamflow from minus to plus range. We can infer that this was from the increase of long-term rainfall variability in 2040s less rainfalls and 2080s much rainfalls. However, the results showed that the T-P was the future target to manage stream water quality even in 2040s period.

• Journal of Biosystems Engineering
• /
• v.23 no.2
• /
• pp.135-146
• /
• 1998

The equation to predict the soil temprature of Pusan and Chinju city as a function of time and soil depth for the geothermal energy utilization system and agriculture was devised. The equation was $T(x,t)\;=\;Tm\;-\;To{\cdot}ExP(-{\xi}){\cdot}cos{{\omega}{\cdot}[t-to-x/(2{\cdot}{\alpha}{\cdot}{\omega})^{0.5}]}$ with the soil thermal diffusivity, ${\alpha},\;of\;0.4\;\textrm{m}^2/day,\;0.0375\;\textrm{m}^2/day$ and phase zero point, to, of 24 days, 22.4 days in Pusan and Chinju city, respectively, during ten years from 1987 to 1996. The predicted and measured soil temperatures agreed well with the coefficient of determination of 0.95 at the soil depth of 0.0, 0.5, 1.0, 3.0, 5.0 m. The maximum and minimum temperature in Pusan 3.7, $30.1^{\circ}C$ at soil surface and 14.3, $18.0^{\circ}C$ at the depth of 5.0 m. The total mean temperature of soil in Pusan and Chinju city was about 16.3, $16.0^{\circ}C$, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.522-527
• /
• 1997

A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling( $C_{d, ref}$ and $\Delta$ $T^{*}$$_{sub}$). The agreement between the measured data and the predictions are excellent.t.ons are excellent.t.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.209-216
• /
• 2014

This study was undertaken to suggest an effective fisheries resources management system by using stock assessment and potential yield analyses of crucian carp population in the mid-upper system of the Seomjin River. Fieldwork was conducted seasonally from 2008 to 2009 in the mid-upper system of the Seomjin River. The stock assessment was carried out by the swept area method and the potential yield was estimated by improved fisheries resource potential estimation system based on the Allowable Biological Catch. Also, the yield-per-recruit analysis was used to review the efficient management implication of the resource, Carassius auratus. As a result, the age at first capture ($t_c$) was estimated as 1.468 year, converted body length (BL) was 10.8 cm. Meaning the current fishing intensities, the instantaneous coefficient of fishing mortality (F) was $0.067year^{-1}$, and the yield-per-recruit analysis showed that the current yield per recruit was estimated to be 15.999 g with F and $t_c$. The instantaneous rate of fishing mortality that provides for Allowable Biological Catch ($F_{ABC}$) based on the current $t_c$ and F was estimated as $0.618year^{-1}$. Therefore, the optimum fishing intensities could be achieved at the higher fishing intensity for Carassius auratus. The calculated annual stock of C. auratus was estimated as 7,608 kg, and the potential yield was estimated as 343 kg with $t_c$ and F at the fixed current level. Using yield-per-recruit analysis, if F and $t_c$ were set at $0.618year^{-1}$ and 2 year, the yield per recruit and total allowable catch would be predicted to increase to 62 g and 2,531 kg by about 3.9 times and 7.3 times, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.901-907
• /
• 2014

We investigated the population ecology of blackthroat seaperch, Doederleinia berycoides, from samples collected in the southern seas of Korea from January to December, 2006. Population ecological parameters included survival rate, the instantaneous coefficient of natural and fishing mortality, and age at first capture. The survival rate (S) of blackthroat seaperch was estimated as 0.4966 using the catch curve method. The instantaneous coefficient of total mortality (Z) was 0.8598/year. The instantaneous coefficient of natural mortality (M) was estimated as 0.4694/year. From the estimates of Z and M, the instantaneous coefficient of fishing mortality (F) was calculated as 0.3904/year. The age at first capture ($t_c$), based on the Pauly method, was 2.87 years.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1529-1536
• /
• 2004

This study was designed to determine total trans fatty acids (tFAs) content of processed foods commonly consumed in the Korean diet and to prepare the database for the estimation of tFAs intake in Koreans. Total fat and tFAs content was determined by Soxhlet extraction method and attenuated total reflection infrared spectroscopy (ATR-IR), respectively. The tFAs positional isomers were analyzed using GC/MS spectrometer. In margarines, the content of tFAs ranged from 8.27% to 28.53%. Shortenings contained higher levels of tFAs (1.98~11.33%) than lards (1.83~1.96%). The content of tFAs in grilled confectioneries was wide (7.37~26.54%). Instant popcorns contained the highest amount of tFAs. Fried chickens had 0.44 to 14.85% of tFAs and french fries had 5.18 to 27.01% of tFAs. In fried snacks (crispy) and chocolates, tFAs were not detected. The amount of tFAs per serving size was the highest in instant popcorn, followed by french fries, fried snack (tortilla), doughnuts, and grilled confectioneries. TFAs isomer of margarines was mostly C18:1${\Delta}$9t. In shortenings and lards, the most abundant positional isomer of tFAs was C18:1${\Delta}$9t and C18:2${\Delta}$9t ${\Delta}$12t. Correlation coefficient of tFAs content between IR and GC/MS method was $r^2$=0.91.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• 연구논문집
• /
• s.29
• /
• pp.5-15
• /
• 1999

Present study deals with performance analysis of an inert gas generator (IGG) which is to be used as an effective mean to suppress the fire. The IGG uses a turbo jet cycle gas turbine engine to generate inert gas for fire extinguishing. It is generally known that a lesser degree of oxygen content in the product of combustion will increase the effectiveness of fire suppressing. An inert gas generator system with water injection will bring advantages of suffocating and cooling effects which are considered as vital factors for fire extinguishing. As the inert gas is injected to the burning site, it lowers the oxygen content of the air surrounding the flame as well as reduces the temperature around the fire as the vapour in the inert gas evaporates during the time of spreading. Some important aspects of influencing parameters, such as, air excess coefficient. $\alpha$, compressor pressure ratio, $ pi_c$, air temperature before combustion chamber, $T_2$, gas temperature after combustion chamber, $T_3$, mass flow rate of water injection, $M_w$, etc., on the performance of IGG system are investigated. Calculations of total amount of water needed to reduce the turbine exit temperature to pre-set nozzle exit temperature employing a heat exchanger were made to compare the economics of the system. A heat exchanger with two step cooling by water and steam is considered to be better than water cooling only. Computer programs were developed to perform the cycle analysis of the IGG system and heat exchanger considered in the present study.