• Journal of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.166-174
• /
• 1966

The multistep mechanism of photosensitized curing reaction cinnamoylated photosensitive polymer is proposed from the energy level diagram of cinnamic acid and sensitizer, and from the fact that excess of sensitizer brings the sensitivity to a limiting value etc. Various factors which have effects on the ability of sensitizer are also discussed. The mechanism involves following steps: activation to the first excited singlet states of cinnamoyl group(C) and sensitizer(S) by their absorption of photon, their intersystem crossing to the lowest triplet state, bimolecular internal quenching by formation of excimer of sensitizer, triplet excitation energy transfer and intermolecular addition between cinnamoyl group in ground state and that in triplet state. The rate equation derived from this mechanism is $-\frac{d[C]}{dt} = \frac{K_1[C]}{K_2 + [C]}[\frac{I^c_{abs}}{K_3 + [S]} + \frac{K_4[C]}{(K_5 + [C])(K_6 + [S])}(I^s_{abs} + \frac{K_7I^c_{abs}[S]}{K_8 + [S]})]$ where $I^c_{abs}\;and\;I^s_{abs}$: the rates of absorption of photon by cinnamoyl group and sensitizer $K_n$: Constants. It is proved with the cinnamate of poly(glyceryl phthalate)(PGC) in the absence of sensitizer using the infrared analytical method and successfully applied for the experimental data reported on the effects of the degree of cinnamoyl esterification and the concentration of sensitizer upon the sensitivity.

• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.182-186
• /
• 2009

Single ascospores was isolated in Yesan-gun, Chungnam in 2006 with Cordyceps militaris. This study was carried out to select the superior isolates which produce more fruiting body and contain more cordycepin contents. Five single ascospore isolates were cultured on brown rice pupae medium and they formed fruiting bodies. To select better isolates, each isolates was hybridized and then the characteristics and cordycepin contents were investigated. After biological efficiency and codycepin contents were examined, finally C0601S05 was selected. Top-cross test of isolate C0601S05 was carried with 29 single ascospores. From this test, isolate C0601S05${\times}$C0601S33 and isolate C0601S05${\times}$C0601S43 containing highest cordycepin contents were selected. Codycepin contents of C0601S05 was 246mg% and those of C0601S05${\times}$C0601S33 and C0601S05${\times}$C0601S43 were 325mg% and 280mg%, respectively. C0601S05${\times}$C0601S33 was registered as Yedang 3 at the Korea seed & variety service.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.735-743
• /
• 2012

The aim of this study was to analyze the effect of the cooling rate after heat treatment on the microstructure and mechanical properties of 2507 duplex stainless steels. Heat treatment was carried out at $1050^{\circ}C$ for 1 hr, followed by controlled cooling. The cooling rates were $175.6{\times}10^{-3}^{\circ}C/s$, $47.8{\times}10^{-3}^{\circ}C/s$, $33.3{\times}10^{-3}^{\circ}C/s$, $16.7{\times}10^{-3}^{\circ}C/s$, $11.7{\times}10^{-3}^{\circ}C/s$, $5.8{\times}10^{-3}^{\circ}C/s$ and $2.8{\times}10^{-3}^{\circ}C/s$, which resulted in variations of the microstructure, such as the fractional change of the ferrite phase and sigma phase formation. Fatigue, hardness, impact and tensile tests were performed on the specimens with different cooling rates. The precipitation of the ${\sigma}$ phase caused a hardness increase and a sharp decrease of toughness and tensile elongation. The fatigue limit of the sample with a cooling rate of $5.8{\times}10^{-3}^{\circ}C/s$ was 26 MPa higher than that of the sample with a cooling rate of $175.6{\times}10^{-3}^{\circ}C/s$. Our observations of the fracture surface confirmed that the higher fatigue resistance of the specimen with a cooling rate of $5.8{\times}10^{-3}^{\circ}C/s$ was caused by the delay of the fatigue crack growth, in addition to higher yield strength.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.34-39
• /
• 2018

In this study, the experiment conditions for the variation of heat release rate in compartment space were constructed to analyze the effects of fire spread and the operation time of sprinkler in accordance with the heat loss of the sprinkler's heat element. The compartment composed of fire board (width = 0.3 m, height = 0.5 m, length = 3.0 m), are manufactured to measure the temperature distributions in the inner space, the mass loss rate and heat release rate during the experiment of N-heptane pool fire test. Also, the operation time of sprinkler is analyzed with the installation of sprinkler and C-factor using Fire Dynamics Simulator Ver.6 under the experiment conditions. The results show that the operation time of sprinkler, which has RTI $100(m{\cdot}s)^{0.5}$ operating temperature $70^{\circ}C$, is 30 s~60 s for C-factor = 0 and 1, 62 s~92 s for C-factor = 3, and 120 s over for C-factor = 5, respectively.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.985-1000
• /
• 2005

In vitro anaerobic incubations of timothy (Phleum pretense L.) forage with bovine rumen fluid were conducted at 39℃ for 0, 3, 6, 9, 24, and 36 h in three trials to examine the biohy- drogenation of linolenic (C18:3) and linoleic acids (C18:2) and their bypass from the rumen. The objectives of the first trial was to study the effect of growth stage (stem elongation, early heading, late heading, and early flowering) and N-fertilization (0 and 120 kg N ha－1) on in vitro biohydrogenation of C18:2 and C18:3. The hydrogenable fraction, the effective disappearance and the bypass of C18:2 and C18:3 were high in timothy harvested at stem elongation, and decr- ease linearly with maturity. The N-fertilization increased the hydrogenable fraction of C18:3, the effective disappearance and the bypass of C18:2 and C18:3. However, the rate of disappearance of C18:2 and C18:3 were not affected by maturity and N-fertilization (P>0.1). In trial 2, the effect of timothy conservation method on in vitro C18:2 and C18:3 biohydrogenation was determined. Silage had the highest effective disappearance of C18:2 and C18:3, and grass hay had lowest one. The amounts of C18:2 and C18:3 biohydrogenated were higher in haylage and silage than in grass hay. Comparative to haylage timothy, the bypass of C18:3 was higher in fresh grass, wilted grass and grass hay. The bypass of C18:2 was higher in fresh grass and silage in comparison to grass hay and haylage. In trial 3, the effects of formic acid and Lactobacillus plantarum inoculum addition to timothy haylage and silage on C18:2 and C18:3 disappearance and bypass were studied. Haylage and silage additives had no effect (P>0.1) on effective disappearance and bypass of C18:2 and C18:3. The addition of formic acid increased the rate of biohydrogenation of C18:3 in haylage and silage, but it decreased the hydrogenable fraction of C18:2 in silage. The results of these three incubation trials show that the hydrogenable fraction and the bypass of C18:2 and C18:3 in timothy decreased with maturity and increased with N-fertilization. Higher amount of C18:2 and C18:3 were biohydrogenated in haylage and silage than in grass hay, and C18:3 ruminal disappearance was higher in fresh grass, wilted grass and grass hay than in haylage.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.256-260
• /
• 2008

This paper describes the mechanical properties of poly(polycrystalline) 3C-SiC thin films with various doping concentration, in which poly 3C-SiC thin fil's mechanical properties according to the n-doping concentration 1($9.2{\times}10^{15}cm^{-3}$), 3($5.2{\times}10^{17}cm^{-3}$), and 5%($6.8{\times}10^{17}cm^{-3}$) respectively were measured by nano indentation. In the case of $9.2{\times}10^{15}cm^{-3}n$-doping concentration, Young's modulus and hardness were obtained as 270 and 30 GPa, respectively. When the surface roughness according to n-doping concentrations was investigated by AFM(atomic force microscope), the roughness of poly 3C-SiC thin films doped by 5% concentration was 15 nm, which is also the best of them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.194-194
• /
• 2009

3C-SiC thin films are widely used in extreme environments, radio frequency (RF) environments, and bio-materials for micro/nano electronic mechanical systems (M/NEMS). The mechanical properties of 3C-SiC thin films need to be considered when designing M/NEMS, so Young's Modulus and the hardness need to be accurately measured. Young's Modulus and the hardness are influenced by N-doping. In this paper, we show that the mechanical properties of poly (polycrystalline) 3C-SiC thin films are influenced by the N-doping concentration. Furthermore, we measure the mechanical properties of 3C-SiC thin films for N-doping concentrations of 1%, 3%, and 5%, by using nanoindentation. For films deposited using a 1% N-doping concentration, Young's Modulus and the hardness were measured as 270 GPa and 30 GPa, respectively. When the surface roughness of the thin films was investigated by using atomic force microscopy (AFM), the roughness of the 5% N-doped 3C-SiC thin film was the lowest of all the films, at 15 nm.

• Geomechanics and Engineering
• /
• v.33 no.4
• /
• pp.401-414
• /
• 2023

Organic clays are ideal habitat for flora and fauna. From a geotechnical perspective, organic clays are soft, weak, variable, heterogeneous and flocculated. Portland cement is a universally common stabiliser. However, some organic acids in soil inhibit full hydration and expose cementation products to rapid dissolution. This paper investigates scopes for use of C₃S cement to enable durable cementation. Prospects of using PP fibre alongside with C₃S cement, scopes for partial replacement of C₃S cement with a plant-based nanosilica and evolution of binders are then investigated. Binding mixtures here mimic the natural functions of rhizoliths, amorphous phases, and calcites. Testing sample population include natural and fibre-reinforced clays, compact mixes of clay - C₃S cement, clay - nanobiosilica, and clay, C₃S cement and nanobiosilica. Benefits and constraints of C₃S cement and fibres for retaining the naturally flocculated structure of organic clays are discussed. Nanobiosilica provides an opportunity to cut the C₃S content, and to transition of highly compressive organic clays into an engineered, open-structured medium with >0.5 MPa compressive strength across the strains spanning from peak to 1.5-times peak.

• Cement
• /
• s.92
• /
• pp.41-54
• /
• 1983

Calcium Silicate의 생성 및 분해에 미치는 $K_2SO_4$와 $MgSO_4$의 영향을 비교 검토하였으며 Calcium Silicate의 생성을 최대로 하는 $SO_3$, MgO와 $K_2O$의 최적비를 반응표면분석기법으로 조사하였다. $K_2SO_4$의 혼합비 증감에 따라 $C_3S$의 생성촉진에 미치는 영향은 없었다. $C_3S$의 조합원료에 $CaSO_4$를 4.0wt$\%$이상 첨가시 $CaSO_4$는 $C_2S$주위에 Sulphate reaction rim을 형성함으로써 $C_2S$와 CaO의 반응을 방해해 $C_3S$의 생성을 억제하였으나 적당량의 MgO가 첨가되면 $CaSO_4$가 4.0wt$/%$이상이라도 $C_3S$의 생성은 억제되지 않았다. $C_3S$의 생성을 최대로 하기 위한 $SO_3$, MgO와 $K_2O$의 최적비를 반응표면분석기법을 이용하여 다음과 같은 결론을 얻었다. 1. $K_2SO_4$는 $K_2O$에 비해 소결에 미치는 영향이 적으므로 크링카에 고용되고 남은 $K_2O$는 전량 $K_2SO_4$로 전환시켜야한다. 2. $SO_3$와 $K_2O$의 최적비율은 1.5이다. 3. $CaSO_4$와 MgO의 최적비율을 유지하기 위해서는 $CaSO_4$중의 wt$\%SO_3$=0.7의 수준으로 Sulphate의 함량을 조절하여야 한다. 4. $SO_3$와 결합하고 남은 $K_2O$가 0wt$\%$인 경우는 $K_2SO_4$=2.3wt$\%$, MgO=1.5wt$\%$일때 $C_3S$의 생성이 최대로 된다. 5. $SO_3$와 결합하고 남은 $K_2O$가 2.0wt$\%$인 경우는 $K_2$$SO_4$=4.5wt$\%$, MgO=3.0wt$\%$일때 $C_3S$의 생성이 최대로 된다.

• Journal of Aquaculture
• /
• v.19 no.2
• /
• pp.95-98
• /
• 2006

This study was performed to determine possibility of compensatory growth of juvenile olive flounder fed a commercial feed during the summer season. Five treatments of fish with triplicates were prepared: C, S1, S2, S3 and S4. Fish in the control group (C) was hand-fed with the commercial feed to apparent satiation twice daily for 6 days a week during 6 weeks. Fish in S1, S2, S3, and S4 experienced 1, 2, 3, and 4 weeks of starvation before fed to satiation twice daily for 5, 4, 3, and 2 weeks, respectively. The feeding trial lasted far 6 weeks. Survival of flounder in C, S1 and S2 was significantly (P<0.05) higher than that offish in S4. Weight gain and specific growth rate (SGR) of flounder in C and S1 were significantly (P<0.05) higher than those of fish in S2, S3 or S4. And weight gain and SGR of flounder in S2 and S3 were significantly (P<0.05) higher than those of fish in S4. Feed consumption of flounder tended to increase with weeks of feeding. Feed efficiency ratio and protein efficiency ratio for flounder in C, S1, S2 and S3 were significantly (P<0.05) higher than those for fish in S4. Moisture content of the whole fish in C was lowest, but highest for fish in S4, respectively. Crude protein content of the whole fish in C was highest, but lowest far fish in S4, respectively. Crude lipid content of the whole fish in C, S1 and S2 was significantly (P<0.05) higher than that of fish in S4. In conclusion, full compensatory growth was obtained in juvenile olive flounder fed for 5 weeks after 1-week feed deprivation during the summer season. Compensatory growth of fish was well supported by improvement in feed efficiency ratio and protein efficiency ratio.