• Journal of the Korean institute of surface engineering
• /
• v.50 no.4
• /
• pp.296-300
• /
• 2017

NiO nanofibers with Au nanoparticles were synthesized by sol-gel and electrospinning techniques, in which the reduction process by ultraviolet exposure is included for the growth of Au nanoparticles in the electrospinning solution. FE-SEM(Field Emission Scanning Electron Microscopy), TEM(Transmission Electron Microscopy) revealed that the synthesized nanofibers had the diameter of approximately 200 nm. X-ray diffraction showed the successful formation of Au-decorated NiO nanofibers. Gas sensing tests of Au-decorated NiO nanofibers were performed using reducing gases of CO, and $C_6H_6$, $C_7H_8$, $C_2H_5OH$. Compared to as-synthesized NiO nanofibers, the response of Au-loaded NiO nanofibers to CO gas was found to be about 3.4 times increased. On the other hand, the response increases were only 1.1-1.3 times for $C_6H_6$, $C_7H_8$, and $C_2H_5OH$.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.625-630
• /
• 1990

Cordierite powders were prepared from Si(OC2H5)4, Al(OC3H7i)3 and Mg(OC2H5)2 by the sol-gel method. Two different methods were applied for producing fine and homogeneous powders. One is that Si(OC2H5)4 with a lowr rate of hydrolysis was partially hydrolyzed and then Al(OC3H7i)3 and Mg(OC2H5)2 were mixed and reacted. The other is based on the simultaneous hydrolysis of these metal alkoxides using i-C4H9OH which retards the rate of hydrolysis of Al(OC3H7i)3 and Mg(OC2H5)2. It was confirmed that ifne and homogeneous powders were obtained from both methods. Also these powders were calcined at four different temperatures during two hours. X-ray diffraction patterns show only ${\mu}$-cordierite phase at 1000$^{\circ}C$, ${\mu}$-cordierite and ${\alpha}$-cordierite phases at 1100-1200$^{\circ}C$ and ${\alpha}$-cordierite phase at 1300$^{\circ}C$ respectively.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.208-214
• /
• 2000

The formation and dissolution of hydroxides, carbonates and hydroxyapatite (HAp), which depend on the pH of solution, are important factor for the preparation of homogeneous and fine HAp, $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$, ceramic powder from the $Ca-PO_4-H_2O$ system. Since the solubility of each complex ion is a linear function of pH, the solubility diagram can be obtained by plotting the logarithmic molar concentrations calculated from the values of the equilibrium constants and solubility products for hydroxides, carbonates, and hydroxyapatite. The optimum pH condition for the formation of single phase $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$ powder in $Ca-PO_4-H_2O$ system at $25^{\circ}C$ was estimated as $10.5{\pm}0.5$ through the theoretical consideration. The HAp powder dried at $80^{\circ}C$ showed a fine agglomerated particles with a size of 75 nm. The HAp powder calcined at $1,000^{\circ}C$ consisted of nearly homogeneous particles with a size of 450 nm. Even though the dried HAp particles consisted of agglomeration, mechanical properties were superior due to fine microstructure after sintering.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Journal of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.149-156
• /
• 1969

$NaAl(OH)_2CO_3$was synthesized using colloidal earth (Allophane) as the starting material and some of its were studied in detail. It was found that Dawsonite was formed in the pH range (pH 12.5~12.0) that the concentration of $HCO_3^-$ was just begun to increase and the presence of $HCO_3^-$ in the product was clarified from the infrared absorption spectrum. The chemical formular of Dawsonite was therefore presumed as $NaAlO (OH) HCO_3$. From toahhe results of X-ray powder diffraction, both peaks at 5.7 $\AA$ and 2.8 $\AA$ were observed, and fibrous crystalline structure was observed from electron micrograph and also found from the microscopic electron diffraction at 5.7 $\AA.$ Therefore the fibrous axis was considered as =Al=O2=Al=O2=Al=(*image) direction. True specific gravity of Dawsonite was 2.44 and its porosity was 91.4%. It was practically insoluble in water, but decomposed in the boiling water to form Pseudo Boehmite. Stable pH range of Dawsonite was about 4.5~11.5. From the results of D.T.A. and T.G.A., it was observed that $CO_2$was liberated at $350^{\circ}C$, and $H_2O$ at $650^{\circ}C$, and converted into strongly hygroscopic $NaAlO_2$, which was easily decomposed in water into $\beta-Al(OH)_3(Bayerite)$ and NaOH.

• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1231-1239
• /
• 1994

In this study, gel powder which had relatively high hydration reactivity in CaO and P2O5 rich composition of CaO-P2O5-SiO2-H2O system was prepared by sol-gel process and its hydrated specimen was manufactured. The it was investigated to appropriate calcination temperature in sol-gel process which hydrated specimen of gel powder have proven to strength and the effect of factors influenced strength in hydration process. The major product of before and after hydration reaction was hydroxyapatite, and crystalline phase of C-S-H was already formed during gelation process. After hydration reaction of pressed specimen, crystalline phase of C-S-P-H was formed. It was hydrated product of silicocarnotite (5CaO.P2O5.SiO2). Gel phases of C-S-H and C-S-P-H occured as a result of partial substitution of amorphous silica by P2O5 was formed. The strength of hydrated hardened body is developed by strong bonding and bridging between the gel phases of C-S-H or C-S-P-H and the crystalline products such as hydroxyapatite, Ca(OH)2 C-S-H and C-S-P-H. In addition, the ultrafine gel powder have an great effect on increase of hydration reaction.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.286-290
• /
• 2004

The antioxidant activities of the various fractions extracted from mustard leaf (Brassica juncea) and mustard leaf kimchi were determined by the radical scavenging effect on 1,1-diphenyl-2-picryl-hydrazyl (DPPH) radical. The fractions from dried mustard leaf, and fermented mustard leaf kimchi for 0 day and fermented mustard leaf kimchi for 5 days at 15$^{\circ}C$ were screened for the scavenging effects by using DPPH assay. The fractions prepared by the systematic extraction procedure with the solvents such as hexane, C $H_2$Cl$_2$, EtOAc, BuOH and $H_2O$ were used for the determination of free radical scavenging effects. The antioxidant activity of EtOAc and n-BuOH soluble fraction from mustard leaf and mustard leaf kimchi for 0 day had stronger than the others. During fermentation at 15$^{\circ}C$ for 5 days, the antioxidant activity was changed. C $H_2$Cl$_2$ and EtOAc soluble fraction showed more potent radical scavenger effects than the others. The difference or results were to the various supplements and fermentation process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.89-92
• /
• 2007

Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.441-448
• /
• 1986

Dioxobis(sub.-salicylaldiminato) molybdenum (VI) complexes, $MoO_2\;(X-sal-N-R)_2,\;(X=H,\;5-CH_3,\;R=C_6H_5,\;p-F-C_6H_4,\;m-Cl-C_6H_4,p-I-C_6H_4\;and\;p-C_2H_5-C_6H_4)$, have been prepared by reactions of dioxobis(sub.-salicylaldehydato) molybdenum (VI), $MoO_2(X-sal)_2$ with primary amines, in which $MoO_2(X-sal)_2$ complexes were obtained by acidification of a mixture solution of ammonium paramolybdate in water and appropriate salicylaldehyde in methanol. All these complexes show two strong Mo=O stretching imodes in the 900-940$cm^{-1}$ and p.m.r. spectra exhibited only one signal for the azomethine group. These results confirmed that the complexes are six-coordinated octahedron with a $cis-MoO_2$ group and the geometrical configurations of the complexes possess a C2 axis of symmetry. From the mass analyses of the complexes, it found that the composition ratios of $MoO_2$ : ligand are 1 : 2. The charge transfer transition corresponding to N-Mo, and O-Mo occured at 29,000$cm^{-1}$ and 32,000$cm^{-1}$ respectively. Where, the complexes were found to be non-ionic materials by conductivity measurements in dimethylformamide.

• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.64-69
• /
• 2011

Porous manganese oxide porous nanostructures were prepared by amino-acid-mediated solvothermal self assembly reaction and subsequent heat treatment at $600^{\circ}C$. When Mn-precursors were heat-treated at $400-550^{\circ}C$, the sensors did not show significant gas responses. In contrast, the manganese oxide heat-treated at $600^{\circ}C$ showed the significant gas responses, that is, the resistance decrease to 100 ppm $C_3H_8$ ($R_a/R_g$ = 2.17, $R_a$ : resistance in air, $R_g$ : resistance in gas) and the resistance increase to 100 ppm $C_2H_5OH$ ($R_g/R_a$ = 1.92). The opposite change of resistance upon exposure to $C_3H_8$ and $C_2H_5OH$ was discussed in relation to the mixed phases of manganese oxides with different valences.