• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.25-25
• /
• 2014

Three species of Fusarium, F. fujikuroi, F. verticillioides and F. proliferatum, are known to be associated with bakanae disease of rice [1, 2]. F. fujikuroi infects rice flowers and survive in endosperm and embryo of the seeds. Infected seed is an important source of primary inoculum of pathogens [3]. Seeds of rice (Oryza sativa cv. Boramchan) collected from bakanae-infected field were found to be 96% infected with Fusarium sp., 52% with F. fujikuroi, 42% with F. verticillioides, and 12% with F. proliferatum as determined by incubation method and species-specific PCR assays. F. fujikuroi was detected at lemma/palea, endosperm and embryo whereas F. verticillioides and F. proliferatum were recovered only from lemma/palea by means of component plating test. Seed disinfection methods have been developed to control bakanae disease and prochloraz has been most widely used for rice seeds. Two chemicals formulated with prochloraz (PC 1) and prochloraz + hexaconazole (PC 2) that inhibit biosynthesis of ergosterol strongly reduced the incidence of Fusarium spp. on selective media to 4.7% and 2.0%, respectively. Disease symptoms of rice seedlings in nursery soil were alleviated by chemical treatment; seedlings with elongated leaves or wide angle between leaf and stem were strikingly reduced from 15.6 to 3.2% (PC 1) and 0 (PC 2), stem rots were reduced from 56.9 to 26.2% (PC 1) and 32.1% (PC 2), and normal seedling increased from 0.4 to 13.3% (PC 2). Prochloraz has some disadvantages and risks such as the occurrence of tolerant pathogens [4] and effects on the sterol synthesis in animals and humans [5]. For these reasons, it is necessary to develop new disinfection method that do not induce fungal tolerance and are safe to humans and animals. Chlorine dioxide ($ClO_2$), that is less toxic, produces no harmful byproducts, and has high oxidizing power, has been reported to be effective at disinfection of several phytopathogenic fungi including Colletotrichum spp. and Alternaria spp. [6]. Gaseous $ClO_2$ applied to rice seeds at a concentration of 20 ppm strongly suppressed mycelial growth of Fusarium fujikuroi, F. verticillioides and F. proliferatum. The incidence of Fusarium spp. in dry seed with 8.7% seed moisture content (SMC) tended to decrease as the concentration of $ClO_2$ increased from 20 to 40 ppm. Applying 40 ppm $ClO_2$ at 90% relative humidity, incidence was reduced to 5.3% and resulted in significant reduction of disease symptoms on MS media. In nursery soil, stem rot was reduced from 56.9 to 15.4% and the number of normal seedlings increased from 0.4 to 25.5%. With water-soaked seeds (33.1% SMC) holding moisture in the endosperm and embryo, the effectiveness of disinfection using $ClO_2$ increased, even when treated with only 20 ppm for four hours. This suggests that moisture was a key element for action of $ClO_2$. Removal of the palea and lemma from seeds significantly decreased the incidence of Fusarium spp. to 3.0%. Seed germination appeared to decrease slightly by water-soaking at $30^{\circ}C$ because of increased SMC and by physical damage of embryos from hulling. These results indicate that the use of gaseous $ClO_2$ was effective as a means to disinfect rice seeds infected with Fusarium spp. and that moisture around the pathogens in the seed was an important factor for the action of $ClO_2$. Further investigations should be conducted to ascertain the best conditions for complete disinfection of Fusarium spp. that infect deep site of rice seeds.

• Journal of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.490-497
• /
• 1990

Two synthetic routes for the 1,4-diboracyclohexene-2 ring 8 have been developed. Method i) starts with 1,2-bis(dichloroaluminyl)ethane, in which the AlCl$_2$ group is replaced by BCl$_2$. Exchange of the chlorine with BI$_3$ in 1,2-bis-(dichloroboryl)ethane yields the corresponding iodo compound, which reacts with the alkynes to heterocycles 8a, b in good yield. In method ii) B$_2$Cl$_4$ is added to alkenes, replacement of chlorine with BI$_3$ yields the bis(diiodoboryl)ethane derivatives which undergo redox reactions with alkynes to give 8c, d. The diiodo derivative 8a forms the pyridine adduct 9a, and reacts with ether to give the ethoxy derivative 8f. 8a-d react with AlMe$_3$ to yield the corresponding dimethyl derivatives 8g-j, which give unstable radical anions when treated with potassium in THF. The ESR parameters are reported. In electrochemical experiments irreversible reductions of 8g-j are observed. 8g-j react with (C$_5$H$_5$)Co(C$_2$H$_4$)$_2$ to give the intermediate 16 VE complexes (C$_5$H$_5$)Co(8), in which C-H activation occurs with formation of the corresponding red 1,4-diboracyclohexadiene complexes 10. The X-ray structure analyses of 10h and 10j are reported.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.175-182
• /
• 2005

Abstract Salmonella pathogenicity island 1 (SPI1) gene expression is regulated by many environmental signals such as oxygen, osmolarity, and pH. Here, we examined changes in the expression level of various regulatory proteins encoded within SPI1 in response to three different concentrations of NaCl, using primer extension analysis. Transcription of all the regulatory genes tested was activated most when Salmonella were grown in Luria Broth (LB) containing 0.17 M NaCl. The expression of hilA, invF, and hilD was decreased in the presence of 0.47 M NaCl or in the absence of NaCl, while hilC expression was almost constant regardless of the NaCl concentration when Salmonella were grown to exponential phase under low-oxygen condition. The reduced expression of hilA, invF, and hilD resulted in lower invasion of hilC mutant to the cultured animal cells when the mutant was grown in the presence of 0.47 M NaCl or in the absence of NaCl prior to infection. Among the proteins secreted via the SPI1-type III secretion system (TTSS), the level of sopE2 expression was not influenced by medium osmolarity. Various effects of osmolarity on virulence gene regulation observed in this study is one example of multiple regulatory pathways used by Salmonella to cause infection.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.291-297
• /
• 1996

The surface properties of AI(Si, Cu) alloy film after plasma etching using the chemistries of chlorinated and fluorinated gases with varying the etching time have been investigated using X-ray Photoelectron Spectroscopy. Impurities of C, Cl, F and O etc are observed on the etched AI(Si, Cu) films. After 95% etching, aluminum and silicon show metallic states and oxidized (partially chlorinated) states, copper shows Cu metallic states and Cu-Cl$_{x}$(x$_{x}$ (x$_{x}$ (1

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.14-16
• /
• 1965

(1) The sterilizing effects of NaF, $CuSO_4$, $CuCO_3$, $HgCl_2$, $ZnSO_4$, and coaltar creosote on the mycelial growth of Irpex consors Berk. Polystictus versicolor L. Fr, Polystictus versicalor L. var. nigricans, and Schizophyllum commune Fr. Were studied. (2) The range of minimum density of the fungicides to check the growth of four fungi mentioned above was as follows; NaF 0.15~0.25(%) $CuSO_4$ 0.20~0.35(%) $CuCO_3$ 0.40~0.50(%) $HgCl_2$ 0.05(%) $ZnSO_4$ 0.40~0.45(%) Creosote 0.10~0.15(%) Of the fungicides tested, $HgCl_2$ was most effective in fungicidal effects, and Creosote, NaF, $CuSO_4$, $ZnSO_4$, $CuCO_3$, followed. The order of resistance of the fungi to the fungicides was as follows: S. Commune Fr. P. Versicalor L. var.nigricans I. Consors Berk P. Versicalor L. Fr. (3) The fungicides were added to the pepton-agor culture medium at the concentration between 0.01 and 0.5%, and the medium was filled into 9cm petridshes. Two square millimeter agar blocks prepared separately from the fungi Contained agar were placed in the middle of the Petri-dishes, in cubated six days at $26^{\circ}C$. Diameter of biggest Colonies were measured.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.218-221
• /
• 1997

When phenylation of styrene was carried out in the presence of Pd(OAc)2 and PPh3 in benzene, trans-stilbene was obtained in good yield (566%) with high selectivity (98%) under mild condition (55 ℃, 50 psi O2, 20 h). Since trans-stilbene could be produced not only from benzene but also from phenyl group of PPh3 by migration of its phenyl group to Pd, the competitiveness of benzene and the migratory aptitude of aryl group of triarylphosphine toward styrene has been investigated with various phosphines (PR3: P(p-C6H4CH3)3, P(p-C6H4OCH3)3, P(p-C6H4F)3, P(p-C6H4Cl)3, P(C6H5)3, P(C6H11)3, P(OC4H9n)3, P(CH2C6H5)3 and P(C6F5)3). The yield and selectivity toward trans-stilbene are increased as the basicity of the phosphines increases. The composition of arylated olefin from arylphosphine, in turn, increases as the electronegativity of the substituent on the aryl group of arylphosphines increases.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1349-1354
• /
• 2010

The geometries and isomerization of the alkylidene silylenoid $H_2C$ = SiLiF as well as its insertion reactions with R-H (R = F, OH, $NH_2$) have been systematically investigated at the B3LYP/6-311+$G^*$ level of theory. The potential barriers of the three insertion reactions are 97.5, 103.3, and 126.1 kJ/mol, respectively. Here, all the mechanisms of the three reactions are identical to each other, i.e., an intermediate has been formed first during the insertion reaction. Then, the intermediate could dissociate into the substituted silylene ($H_2C$ = SiHR) and LiF with a barrier corresponding to their respective dissociation energies. Correspondingly, the reaction energies for the three reactions are -36.4, -24.3, and 3.7 kJ/mol, respectively. Compared with the insertion reaction of $H_2C$ = Si: and R-H (R = F, OH and $NH_2$), the introduction of LiF makes the insertion reaction occur more easily. Furthermore, the effects of halogen (F, Cl, Br) substitution and inorganic salts employed on the reaction activity have also been discussed. As a result, the relative reactivity among the three insertion reactions should be as follows: H-F > H-OH > H-$NH_2$.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.114-119
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation towered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions'inhibition power from cation's lowering: the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^->Cl^-> Br^-I^-$. The activation energy(E$_{a}$) lot the dyeing was in the order of $F^->Cl^-> Br^-I^-$ but the dye-uptake on the fabric and the activation free energy$(\Delta{G}^*)$, the real energy barrier fort the reaction, were in the order of $F^->Cl^-> Br^-I^-$ because the strength of the interaction of the anions with sodium cations was the salute as the order of the latter. In other words F$^{[-1000]}$ exerted the weakest electrostatic force on $Na^+$ and competed with the dyestuff anions least of all. The decrease in $\Delta{S}^*$ may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Brёnsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.g.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.570-575
• /
• 2002

$SrBi_2Ta_2O_9$ thin films were etched in $Cl_2/CF_4/Ar$ inductively coupled plasma (ICP). The maximum etch rate was 1300 ${\AA}/min$ at 900 W ICP power in Cl$_2$(20%)/$CF_4$(20%)/Ar(60%). As RF source power increased, radicals (F, Cl) and ion ($Ar^+$) increased. The influence of plasma induced damage during etching process was investigated in terms of P-E hysteresis loops, chemical states on the surface, surface morphology and phase of X-ray diffraction. The chemical states on the etched surface were investigated with X-ray spectroscopy and secondary ion mass spectrometry. After annealing $700^{\circ}C$ for 1 h in $O_2$ atmosphere, the decreased P-E hysteresises of the etched SBT thin films in Ar and $Cl_2/CF_4/Ar$ plasma were recovered.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.523-537
• /
• 2001

The physical properties of pH, turbidity, TDS and salt contents in the stream water near the entrance of Woonjcongdong sanitary landfill area with a drainage pipe are higher than those in neighbored drainage system, but DO it lower than that in neighbored drainage system blue to the eutrophication. In the ground water, pH, turbidity, TDS and salt contents at A ,F and C where may be under effect of the Woonjeongdong sanitary landfill area, are also shown higher values in contrast to other groundwater site, like B , D , and E , Particularly, the groundwater in A , F and C are plotted in Na-Cl type (If the piper diagram, which is an another important prolf of the contaminapion by the leachate and washing water from the Woonjeongdong sanitary landfill area. Some elements and physical properties of the waters in rainy season are desplayed a clear characteristics of contaminaton, compared to the theose of winter in thes study. Elements such as Ca, Mg, Na, K, Cl­,$SO_4^{2-} , \;and \;F­^-$) are accompanied well with each other by the result of water in the vicinity of landfillarea.