• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.12-17
• /
• 2018

We investigated the corrosion behavior of commercially pure cold working processed (CP)-Ti with coarse-grained (CG) microstructure heat-treated at $400^{\circ}C$ and $600^{\circ}C$, respectively. It is observed that corrosion resistance of as-received CP-Ti heat-treated at $400^{\circ}C$, at which recrystallization proceeds, is largely improved. Interestingly, the mechanical property of CP-Ti sample at $400^{\circ}C$ was scarcely deteriorated. It is attributed to the decrease of the defects such as strain variance and dislocation density. On the other hand, the annealing treatment at $600^{\circ}C$ of CP-Ti plate causes to grain growth with the noticeable reduction of mechanical property. Hence, it is considered that defect density such as strain and dislocation density is important microstructural parameter for the improvement of corrosion resistance. The introduction of proper annealing treatment can help to improve corrosion resistance without scarifying mechanical property of CP-Ti.

• Journal of Korean Academy of Nursing Administration
• /
• v.16 no.1
• /
• pp.59-72
• /
• 2010

Purpose: This study is a descriptive research to analyze prognostic factors of barbiturate coma therapy (BCT) for severe brain damage patients, to develop a critical pathway (CP) based on the results of analysis and to examine the effect of its clinical application. Method: We analyzed medical records of 76 patients who received BCT for more than three days between January 1999 to July 2005. Based on the results of the analysis, we developed a CP and applied it to 12 people during August-December of 2005. Result: By application of BCT CP, the mortality rate decreased from 31.6% to 16.7%. It was found that the period of staying at ICU and total period of hospitalization were shortened by 2.78 (13.9%) days and 16.43 (29.4%) days, respectively. The Glasgow coma scale of the recovery group by CP application was 9.03 (4.64) at 72 hours post of BCT and 14.28 (1.82) at discharge from hospital, and DRS was 6.62 (6.38) points. Conclusion: By verifying clinical validity of the suggested CP, we believe that we have obtained visible effects standardizing the treatment pathway of BCT for brain damage patients.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.35 no.1
• /
• pp.75-90
• /
• 2022

Objectives: The purpose of this study protocol is firstly to investigate the status of Korean medical treatment of dysmenorrhea, and secondly to investigate effectiveness of the Clinical Pathway (CP) of dysmenorrhea and review the applicability. Methods: This is a multi-center observational study. The data will be prospectively collected from 14 Korean medicine clinics. 45 patients for each of the CP-applied and non-applied groups will be recruited to compare the degree of improvement in menstrual pain. All the diagnosis records, treatment methods, treatment results, adverse events, and medical expenses of patients with dysmenorrhea will be collected. We will investigate the proportion of patients who could be applied with CP, and the actual number of CP applications, and CP completion rate to evaluate the applicability. Additionally, the satisfaction survey will be used to collect feedback from medical staff members and patients. Results: The results of this study will be disseminated through peer-reviewed publications and scientific presentations. Conclusions: This study is expected to provide valuable data for application of standard Korean medicine clinical pathway for dysmenorrhea.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.369-377
• /
• 2013

Two experiments were conducted separately with different concentration of dietary energy and protein to evaluate the performance, blood characteristics and bone mineral density (BMD) of broiler chicks. In experimentr 1, a total of 480 heads one-day-old Ross ${\times}$ Ross broiler chicks were randomly divided into 6 treatments (5 replications; 16 birds/pen). Three concentration of ME (3,000, 3,100 and 3,200 kcal/kg) and two of CP (pre-starter 22, 23%, starter 20, 21% and finisher 18, 19%) in a $3{\times}2$ factorial arrangement of treatments were used. In experiment 2, similar chicks and CP concentration was used but ME concentration was changed (pre-starter; 3,000, 3,050 and 3,100 kcal/kg, starter; 3,050, 3,100 and 3,150 kcal/kg, finisher; 3,100, 3,150 and 3,200 kcal/kg) in the diet. In both experiments, 10 blood and tibia samples were collected per treatment and blood characteristics and BMD were analyzed. In experiment 1, weight gain and feed intake were increased by the 3,000 kcal/kg ME in the diet (P<0.05). Serum total protein and albumin levels were increased numerically with the level of CP in the diet. Total cholesterol and HDL content were increased numerically with the energy content in the diet. Consistently in experiment 2, weight gain was increased numerically by the energy and protein level (prestarter $3,000{\times}23$, starter $3,050{\times}21$ and finisher 3,100 kcal/kg ME and 19% CP) in the diet. Serum glucose level was increased with the energy level in the diet (P<0.05). Therefore, serum total protein, albumin, triglycerides, total cholesterol and HDL contents were tended to increase with the energy increments in the diet.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.4
• /
• pp.435-439
• /
• 1986

The viability of tubercle bacilli in the sputum specimens has been investigated after different periods of storage at diffeent temperatures and in the presence of different preservatives. No loss of culture positives was observed for one week storage at $4^{\circ}C$, but 9.8% 19.5%C, and 26.8% of sputums failed to yield positives on 2, 3, and 4 weeks of storage respectively. At $25^{\circ}C$ even one week storage made 19.5% of sputums fail to yield positive culture and 2, 3, and 4 weeks of storage made 36.6% 70.7%, and 90.2% of sputums fail to yield positive culture respectively. And contamination was unacceptably high beyond one week of storage at $25^{\circ}C$. Contamination of sputum specimens could be protected fairly well by 0.5% boric acid, by 5% trisodium phosphate or by 0.5% cetylpyridium chloride, but, except CP, the former two had no advantage at all to protect viability of tubercle bacilli over the specimens without preservative. The CP was much less harmful to the viability of tubercle bacilli than BA, yielding 61.0% and 31.7% of culture positives on 3 and 4 weeks of storage in the presence of CP, while BA yielded 34.1% and 4.9% of positives on the same respective periods of storage. Therefore CP may be useful to preserve sputums if it takes more than 2 weeks to transport them at the temperature of over $25^{\circ}C$.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.1
• /
• pp.25-34
• /
• 1969

From viewpoints of over-all ship economy the straight framed V-bottom hull forms with chines are considered to be attractive even for usual commercial vessels, because increments of resistance over that of round hull forms, if any, can be well compensated with reduction in construction cost.[1] To investigate the influences of both prismatic coefficient and chine elevation on resistance performance, three models of straight-framed V-bottom hull forms which are similar to Prof. C. Ridgely-Nevitt's W-18, W-8, and W-20[2],[3] in size and hull form coefficients were tested at the SNU Ship Model Towing Tank for resistance measurements. They are of Cp=0.60, 0.65 and 0.70 and of ${\Delta}/(0.01L)^3=300$. Influence of variation of chine elevation on resistance performance were observed with the test results obtained at normal condition, and at the trimed by the stern by 2% and 4% of $L_{bp}$ at normal condition under same displacement. The hull form characteristics are shown in Table 1, and in Fig. 1, 2, 3, 4 and 5. The test results are shown in Fig 8, 9 and 10 in the form of Cr vs. $V/\sqrt{L}$ curves taking Cp as a parameter for normal condition, trim by the stern in 2% and 4% $L_{bp}$ at normal condition , respectively. Cr vs. $V/\sqrt{L}$ curves taking trim condition as a parameter are also shown in Fig 11, 12 and 13 for Cp=0.60 and 0.70, respectively. The best and the worst trim condition at given $V/\sqrt{L}$ in viewpoint of Cr are plotted for each Cp-value as shown in Fig 14, 15 and 16. From the above results the following conclusions are derived: (1) In general, the resistance performance of the straight-framed V-bottom hull forms are not inferior to those of round hull forms. At a certain range of $V/\sqrt{L}$ the former gives less resistance than the latter. (2) Regarding influences of Cp on Cr, it is observed that, at $V/\sqrt{L}$ less than about 0.925, the greater Cp-value gives the more increment of Cr, and that, at $V/\sqrt{L}$ greater than about 0.925 the smaller Cp-value gives the more increment of Cr. It is also noteworthy that the model of Cp=0.70 has remarkable hump on Cr vs. $V/\sqrt{L}$ curve between $V/\sqrt{L}=0.80$ and 0.90. (3) For higher speed within the test range, the chine elevation having the steeper slope around bow and the easier slope around amidship and stern, refered to watering, give the better results in resistance performance. (4) Assuming the chine elevations adopted for the tested models were not of the best, we would expect further improvement of resistance performance for such form. Hence, a systematic study on chine elevation is very disirable to prepare design data of general purpose for the such hull forms.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.695-704
• /
• 2008

This study was conducted to investigate effects of dietary crude protein(CP) level and supplementation of conjugated linoleic acid(CLA) on growth performances and meat quality parameters in finishing pigs. The experiment was designed using protein levels(11.3%, 16.0%) and CLA levels(0%, 2.5%) according to 2×2 factorial design. A total of forty-eight pigs [(Landrace×Yorkshire)×Duroc] with an average initial weight of 79±1kg were allotted to one of four dietary treatments. Each treatment had four replications of three pigs per replicate. Final body weight(P<0.05) and average daily gain(P<0.01) were lower in 11.3% CP treatments than in 16.0% CP treatments, while feed/gain was high(P<0.01) in 11.3% CP treatments compared with 16.0% CP treatments. Carcass weight was lighter in 11.3% CP treatments(P<0.001) and CLA 2.5% treatments(P<0.01) than in 16.0% CP and CLA 0% treatments, respectively. A significant interaction between CP and CLA on carcass weight was observed(P<0.01), where supplementation of 2.5% CLA to finishing diets decreased carcass weight in 16.0% CP treatments, while no difference was found in 11.3% CP treatments. Backfat thickness was thinner in 11.3% CP treatments and CLA 2.5% treatments than in 16.0% CP and CLA 0% treatments, respectively(P<0.05). A significant interaction between CP and CLA on backfat thickness was observed(P<0.001), where supplementation of 2.5% CLA to finishing diets decreased backfat thickness in 16.0% CP treatments, while no difference was found in 11.3% CP treatments. Marbling score and intramuscular fat contents were higher in 11.3% CP treatments than in 16.0% CP treatments(P<0.01). In conclusion, feeding of protein-deficient diets in finishing pigs could produce favorable pork with high marbling score and thinner backfat. On the other hand, supplementation of CLA was considered to decrease backfat thickness when diets with optimal level of crude protein were fed to finishing pigs.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.138.2-139
• /
• 2003

Grapevine leafroll-associated 1 virus (GLRaV-1) and Grapevine leafroll-associated 3 virus (GLRaV-3), member of the genus Ampelovirus, are important viral disease of grapevine in the world. these viruses transmitted only dicotyledonous host by vectors such as mealybugs and there is no suitable herbaceous host for virus. The diseased leaves turn yellowish or reddish depending on cultivars and viruses. Viruses are existed at low concentration and ununiformly distribution in grapevine. Using small-scale double-stranded RNA (dsRNA) extraction method, reverse transcription and polymerase chain reaction (RT-PCR) product of 1Kb long which encoded of coat protein (CP) gene for both viruses was successfully amplified with a specific primers. The RT-PCR product was cloned into the plasmid vector and its nucleotide sequences were determined from selected recombinant cDNA clones. Sequence analysis revealed that the CP of GLRaV-1 consisted of 969 nucleotide, which encoded 323 amino acid residues and CP of GLRaV-3 consisted of 942 nucleotide, which encoded 314 amino acid residues. The CP of GLRaV-1 and GLRaV-3 has 93.8％ and 98.7％ amino acid sequence identities, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.460-465
• /
• 1994

New silicon-monosubstituted (${\eta}^4$-2,3,4,5-tetraphenyl-l-silacyclopentadiene)transi tion metal complexes are described. (7-Alkyl-7-silanorbornadienyl)MLn(Alkyl=Methyl: MLn=CpRu$(CO)_2$: Alkyl=Methyl: MLn=CpNi(CO): Alkyl=Ethyl: MLn=CpNi(CO)) complexes were prepared from the corresponding silole-transition metal complexes with dimethylacetylenedicarboxylate. Cycloaddition products were obtained with 2,3-dimethyl-1,3-butadiene, 2,3-butanedione, and 1,4-benzoquinone through the ruthenium-substituted silylene. We have determined the crystal structure of (1-methyl-2,3,4,5-tetraphenyl-l-silacyclopentadien yl)cyclopentadienyldicarbonylruthenium by using graphite monochromated Mo-Ka radiation. The compound was crystallized in the monoclinic space group $P2_{1/c}$ with a = 9.838(l), b = 15.972(3), c = 18.327(3) ${\AA}$, and ${\beta}= 94.28(l)^{circ}$. The ruthenium moiety CpRu$(CO)_2$ on silicon is in an axial position.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.213-217
• /
• 1997

Magnesium reduction of Mo(N-C6H3-2,6-i-Pr2)2Cl2(DME) in the presence of trimethylphosphine led to a mixture of Mo(N-C6H3-2,6-i-Pr2)(PMe3)2Cl3, 1, and Mo2(PMe3)4Cl4, 2. In solution 1 is slowly air-oxidized to Mo(N-2,6-i-Pr2-C6H3)(OPMe3)(PMe3)Cl3, 3. 1 is chemically inert to carbon nucleophiles (ZnMe2, ZnEt2, AlMe3, AlEt3, LiCp, NaCp, TlCp, NaCp*, MeMgBr, EtMgBr), oxygen nucleophiles (LiOEt, LiO-i-Pr, LiOPh, LiOSPh), and hydrides (LiBEt3H, LiBEt3D). Crystal data for 1: orthorhombic space group P212121, a=11.312(3) Å, b=11.908(3) Å, c=19.381(6) Å, Z=4, R(wR2)=0.0463 (0.1067). Crystal data for 2: monoclinic space group Cc, a=18.384(3) Å, b=9.181(2) Å, c=19.118(3) Å, b=124.98(1)°, Z=4, R(wR2)=0.0228 (0.0568). Crystal data for 3: orthorhombic space group P212121, a=11.464(1) Å, b=14.081(2) Å, c=16.614(3) Å, Z=4, R(wR2)=0.0394 (0.0923).