• Fisheries and Aquatic Sciences
• /
• v.12 no.1
• /
• pp.6-15
• /
• 2009

Biochemical and functional properties of acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) from rockfish skin were characterized. Yield of PSC (90.0%) was higher than that of ASC (63.2%). Both ASC and the PSC consisted of ${\alpha}1$ and ${\alpha}2$ chains, and $\alpha$-cross-linked components. According to the results of hydroxylation of proline and lysine, and FT-IR, no difference between the helical structure of ASC and PSC was identified. Thermal denaturation temperature (TDT) of ASC from rockfish skin was $22.8^{\circ}C$, the same as exhibited in PSC. Both ASC and PSC were higher in water absorption capacity (WAC) and oil absorption capacity (OAC) than other vegetable proteins. According to the results of emulsifying activity (EA) and cooking stability (CS), both ASC and PSC from rockfish skin were inferior compared to the commercial emulsifier (Tween-80). The results of FT-IR suggested that the structure of PSC was slightly different when compared to that of ASC. No differences in solubility were established between ASC and PSC from rockfish skin at various pH and NaCl concentrations.

• Applied Biological Chemistry
• /
• v.28 no.2
• /
• pp.88-91
• /
• 1985

For the systematic investigation of biochemical characteristics of Korean ginseng protein, protein fractions were analyzed by the techniques of sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The effect of pH and various salts on extractibility of ginseng protein were determined while the amino acid composition was studied by amino acid autoanalyzer. The protein was consisted of 66.08% of albumin and 20.51% of glutelin. Extractability of ginseng protein was the lowest in pH 3.0 and the highest in $pH\;6.0{\sim}8.0$. Among the neutral salts solution, $0.4M\;Na_2CO_3$ showed maximum extractability while $1.0M\;MgSO_4$ solution showed the least extractability. Resonable precipitation was obtained by 40% of acetone and ammonium sulfate. It has been shown by SDS polyacrylamide gel electrophoresis that the soluble protein had 11 bands. The molecular weight for the main protein of the soluble protein wasestimated to be 43,000. In amino acid composition of water extracted protein, arginine content was the highest 47.17% while on the contray, proline and cystine contents were very low.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.1-11
• /
• 2017

This study was conducted to investigate the performance of four commercial chemical agents in stabilizing arsenic (As) in soil at the forest area near the former Janghang smelter site. After amending the stabilizing agents (A, B, C, and D) into As-contaminated soil samples, synthetic precipitation leaching procedure (SPLP) and solubility bioavailability research consortium (SBRC)-extractable As concentrations significantly decreased except for agent D, which is mainly composed of fly ash and calcium carbonate. Increase of SPLP and SBRC-extractable As concentrations in four soil samples (S1, S2, S3, and J2) was attributed to desorption of As adsorbed on iron oxides due to high pH generated by agent D. It is therefore necessary to consider application conditions according to soil characteristics such as pH and buffering capacity. Results of sequential extraction showed that readily extractable fractions of As in soil (i.e., sum of $SO_4-$ and $PO_4-extractable$ As in soil) were converted into non-readily extractable fractions by amending agents A, B, and C. Such changes in the As distribution in soil resulted in the decrease of SPLP and SBRC-extractable As concentration. A series of follow-up monitoring and management plan has been suggested to assess the longevity of the stabilization treatments in the site.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.64-71
• /
• 1997

This study was performed to investigate the effect of co-existence of carbofuran and chlorothalonil on the short-term bioconcentration factor in Brachydanio rerio(zebrafish). The fishes were exposed to the single and combined treatment of carbofuran and chlorothalonil for 1, 3 and 5 days. Experimental concentrations of carbofuran were 0.05 and 0.10 ppm under the single treatment. And those of chlorothalonil were 0.005 and 0.010 ppm. Experimental concentrations of the combined treatment of carbofuran and chlorothalonil were 0.05 ppm+0.005 ppm, 0.05 ppm+0.010 ppm, 0.10 ppm+0.005 ppm for 1, 3 and 5 days, respectively. Carbofuran and chlorothalonil in fish and in test water were extracted with n-hexane and acetonitrile. GC-ECD was used to detect and quantitate carbofuran and chlorothalonil. 1-day, 3-day and 5-day bioconcentration factors(BCF$_1$, BCF$_3$ and BCF$_5$) of each pesticide were obtained from the quantitation results. The depuration rate of each pesticide was determined over the 24-h period after combined treatment. The results were as follows: Carbofuran did not bioaccumulate in zebrafish under the single and combined treatment for testing periods. BCF$_1$ values of chlorothalonil in concentration of 0.005 and 0.010 ppm under the single treatment were 0.508, 0.621, BCF$_3$ were 1.327, 1.511 and BCF$_5$ were 1.331, 1.597, respectively. BCF$_1$ values of chlorothalonil were 0.512, 0.520 and 0.619, respectively, when the concentration of carbofuran and chlorothalonil in combined treatment were 0.05+0.005, 0.05+0.010 and 0.10+0.005 ppm. BCF$_3$ values of chlorothalonil 1.341, 1.338 and 1.513, respectively, and BCF$_5$ values of chlorothalonil were 1.332, 1.327 and 1.521, respectively, under the above combined treatment. Depuration rate constants of chlorothalonil in concentration of 0.005 and 0.010 ppm under the single treatment were 0.011 and 0.012. Depuration rate constants of chlorothalonil were 0.011, 0.010 and 0.011, when the concentration of carbofuran and chlorothalonil in combined treatment were 0.05+0.005, 0.05+0.010 and 0.10+0.005 ppm. It was observed that no significant difference of carbofuran and chlorothalonil concentration in fish extracts, test water, BCFs and depuration rate constants of carbofuran and chlorothalonil between combined treatment and single treatment. It was considered that no appreciable interaction at experimental concentrations due to lower concentrations than LC$_{50}$. It is suggested that the difference of BCFs between carbofuran and chlorothalonil due to those of fat composition of fish and solubility of carbofuran and chlorothaionil.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.3
• /
• pp.213-218
• /
• 1996

Hot-water extract, Fr. 1, of Phellinus linteus mycelium was fractionated into Fr. 2, 3, 4, and 5 by the difference of solubility in ethanol. The polysaccharide fractions were studied for their immunostimulating activity on in vitro T-independent polyc1onal antibody response to trinitrophenyl-haptened SRBC (sheep red blood cell). The Fr. 4 with the highest immunostimulating activity was subjected to DEAE-cellulose ion exchange chromatography and gave five fractions, 4-I, II, III, IV, and V. The in vitro immunostimulating assay of the five fractions showed that 4-I and 4-III had a similar activity to that of LPS but the other fractions had low activity. By analyses of chemical composition and HPLC, all fractions obtained were found to be heteropolysaccharide-protein complex. The molecular weights ranged from 9, 000 to 15, 000. Sugar analyses showed that glucose, galactose, mannose, arabinose, and xylose were main component. Uronic acid and amino sugar were also detected in the fractions. It should be noted that the molecular weight (15, 000) of 4-III was very small and the structure of 4-III may be different from the known immunostimulating branched $\beta$-(1longrightarrow3)-glucan.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2383-2386
• /
• 2013

Senescence marker protein 30 (SMP30), a hepatocellular carcinoma (HCC) associated antigen, was earlier shown by our research group to be highly expressed in HCC paracancerous tissues, but have low levels in HCC tissues. In order to detect anti-SMP30 antibody in serum of HCC patients, we established pET30a-SMP30 and pColdIII-SMP30 expression systems in Escherichia coli. However, the expression product was mainly in the form of inclusion bodies. In this research, we used several combinations of chaperones, four molecular chaperone plasmids with pET30a-SMP30 and five molecular chaperone plasmids with pColdIII-SMP30 to increase the amount of soluble protein. Results showed that co-expression of HIS-SMP30 with pTf16, combined with the addition of osmosis-regulator, and a two-step expression resulted in the highest enhancement of solubility. A total of 175 cases of HCC serum were studied by ELISA to detect anti-SMP30 antibody with recombinant SMP30 protein. Some 22 were positive and x2 two-sided tests all showed P>0.05, although it remained unclear whether there was a relationship between positive cases and clinical diagnostic data.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.268-277
• /
• 2001

The MDI(4,4'-diphenyl methane diisocyanate) was mixed with PPG, PEG and trimethylolpropane(TMP) respectively to prepare polyurethane resin. The various physical properties were measured for the mixtures. The gel-time was shortened by adding of PEG and TMP The molecular weight made a greater influence on the gel-time than the number of functional groups. The NCO-OH reaction was more active and faster than the NCO-NCO reaction. The hardness was influenced by crosslinking-density and molecular structure. The NCO-OH reactions yielded the flexible films and the NCO-NCO reactions yielded the brittle films. The increase of crystallinity and shrinkage induced the low adhesion ratio but the adding of TMP induced the high adhesion ratio. The flame-retardancy was influenced by quantity and kinds of flame-retardant. IXOL B-251 was the most excellent among the flame-retardants employed in this study. TCCP was partially separated because of the lack of solubility.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• KSBB Journal
• /
• v.7 no.3
• /
• pp.229-234
• /
• 1992

Alcohol fermentations were carried out to confirm the capacity of ethanol production from glucose, starch and soluble starch(dextrin) by Schwanniomyces castellii NRRL Y-2477. Schw. castellii NRRL Y-2477 was able to produce the 63.9g/l ethanol using 94% subtrate from 150g/l-glucose medium. The direct alcohol fermentation of starch having the maximum solubility of 20g/1 at $30^{\circ}C$ yielded 9.1g/l ethanol upon complete depletion of starch, whereas 34.5g/1 ethanol was produced by utilizing 82% of 100g/1 soluble starch medium. The fermentation of 150g/1 soluble starch produced 52.1g/l ethanol using about 79% of substrate. Thus, it was found that the limiting step of direct alcohol fermentation of starch by Schwanniomyces castellii NRRL Y-2477 was a hydrolysis of starch.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.203-208
• /
• 2011

Effects of particle size and high pressure processing on the extraction rate of oil compounds from soybean powder were evaluated by Soxhlet method using hexane and supercritical fluid extraction (SFE) using $CO_{2}$. SFE was carried out at 4,000 psi and $50^{\circ}C$ for 4 hr. The mean particle sizes were varied from 26.7 to 862.0 ${\mu}m$ by controlling milling time. Saturation solubility increased as the particle size decreased. At large particle size, high pressure processing (HPP) showed higher extraction yield in both hexane extraction and SFE, but, as the particle size decreased, the HPP was irrelevant to the extraction yield in SFE. The higher extraction rate obtained from the smaller particle size. The scanning electronic microscopy of soybean powder treated by HPP showed pores on the surface of the particle. The higher extraction rate and yield from HPP treatment might be due to the less internal resistance of transferring the solvent and miscellar in the solid matrix by collapsing of tissues.