• 제목/요약/키워드: $CO_2$ separation

검색결과 841건 처리시간 0.031초

전기로 제강분진의 재활용과정에서 발생되는 Fe-Clinker의 자원화에 관한 연구 (A Study on the Resource Recovery of Fe-Clinker generated in the Recycling Process of Electric Arc Furnace Dust)

  • 윤재홍;윤치현
    • 자원리싸이클링
    • /
    • 제32권1호
    • /
    • pp.50-59
    • /
    • 2023
  • 전기로에서 고철(Scrap)의 용해과정에서 발생되는 분진량은 고철장입량의 약1.5%정도이며, 주로 백필터(Bag Filter)에서 포집된다. 전기로 제강분진의 주요한 구성원소인 아연(Zn)과 철(Fe)중에서 아연성분은, 제강분진에 탄소계의 환원재(코크스, 무연탄)와 석회석(C/S제어)을 첨가하여 Pellet형태로 가공한 후에 반응로(Rotary Kiln 또는 RHF)에 장입하여 환원, 휘발, 재산화의 단계적인 세부반응을 거쳐서, 60wt%Zn을 함유한 조산화아연(Crude Zinc Oxide)으로 회수된다. 한편 제강분진 중의 철(Fe)성분은, Fe-Base의 Clinker(2차부산물)라고 하는 고형물의 형태로 반응기로부터 배출된다. 기존의 Fe-Clinker의 처리방법은, 각국의 상황에 따라서 다양한 방안들이 시행되고 있는데, 대표적인 처리방법으로는 매립, 재활용(로반재, 콘크리트용 골재, 시멘트제조용 Fe-Source), 그 외에 다양한 처리방법들이 있다. 이들 방법들 중에서 매립의 경우는, 침출수에 의한 환경오염, 고가의 매립비용, Fe자원의 낭비 등의 이유로, 결코 바람직한 처리방법이라고 할 수는 없다. 그러나 Fe-Clinker중의 Fe성분을 전기로를 이용하여 직접적으로 재활용하는 방법에 대한 연구결과는 거의 찾아볼 수 없었다. 따라서 본 연구에서는 Fe-Clinker중의 Fe성분을 보다 적극적으로 회수하기 위한 방법으로서, 먼저 Fe-Clinker를 분쇄하고 이어서 비중선별과 자력선별을 순차적으로 실시하여, Fe-성분이 농축된 조분(Coarse particle, >약10㎛)과 슬래그성분을 주로 함유한 미분(Fine particle, <약10㎛)으로 분리하였다. 이렇게 분리한 조분에 탄소계 환원제(코크스, 무연탄)와 점결재(전분)를 첨가하여 단광 Clinker를 제조하여, 전기로에 고철을 장입할 때에 소량(1~3wt%)의 단광Clinker를 함께 장입하여, 단광Clinker의 첨가재(가탄재, Fe-Source, 발열재 등으로서의 역할)로서의 사용가능성을 조사하였다. 그 결과, 비록 소량이지만, 전력원단위와 생산수율이 다소 향상되는 효과를 나타내었으며, 용융금속에 대한 가탄효과도 확인할 수 있었다.

LC-MS/MS를 이용한 퇴비 및 액비 중 항생제 동시 분석법 개발 (Development of Simultaneous Analytical Method of Veterinary Antibiotics in Manure using Liquid Chromatography Coupled with Tandem Mass Spectrometry)

  • 정형석;이영준;이한솔;;;박병준;김장억;심재한
    • 한국환경농학회지
    • /
    • 제36권3호
    • /
    • pp.201-210
    • /
    • 2017
  • 전국의 퇴비 및 액비 시료에서 대상 항생제 종9 (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, tylosin)을 pH 6 McIlvaine buffer를 사용하여 아세트산 함유 아세토니트릴, $Na_2Cit.5H_2O$, $Na_3Cit.2H_2O$로 추출 후 $C_{18}$과 PSA로 정제하여 LC-MS/MS로 분석하는 모니터링을 수행하였다. 그 중 5종의 항생제 sulfamethazine, sulfathiazole, tylosin, tiamulin 및 clopidol이 국내 퇴액비 시료에서 검출되었으며 제안한 분석법은 퇴 액비 중 잔류 항생제 모니터링을 위한 빠르고 간편한 시험법이라 사료 된다. 본 실험을 통하여 퇴비 및 액비 중 축산 항생제의 잔류 현황을 파악하여 모니터링 자료를 확보하였고 이를 활용하여 검출된 항생제들이 안전한 토양 및 생태 환경 유지 및 관리의 기초 자료와 더불어 환경기준 예비 항목 및 설정(안)을 위한 기초자료로 제공 및 다양하게 활용될 수 있을 것으로 판단된다.

백로번식지 주변 개발사업의 환경영향평가시 중점평가항목 선정 및 평가방안 연구 (A Study on the Determination of Major Evaluation Items and the Preparation of Report when Evaluating the Environmental Impact of Development Projects around Ardeidae Breeding Habitats)

  • 임혜령;김선구
    • 환경영향평가
    • /
    • 제32권1호
    • /
    • pp.1-14
    • /
    • 2023
  • 백로번식지 주변 개발사업을 진행할 때 환경영향평가 단계에서 갈등을 사전에 예방할 수 있도록 중점평가항목 선정과 저감방안을 제시하여 지속가능한 공존의 방안을 강구하고자 한다. 중점평가항목으로 백로번식지 보전을 위한 동·식물상 항목, 백로번식지로 인한 악취와 소음의 영향을 평가할 수 있는 악취와 소음 항목을 선정한다. 평가항목의 평가방안은 첫째, 동·식물상 항목에서 조사범위는 법정보호종 위주로 국한하지 말고 주요 종 번식지와 철새도래지에 해당하는 백로번식지와 취식지까지 포함하여 조사하고, 번식지와 취식지 면적감소에 따른 보전방안을 세운다. 둘째, 악취 항목에서 조사시기는 6월말에서 7월말까지 악취발생량이 최고인 시점을 포함한다. 악취 평가기준은 농도규제인 복합악취 배출허용기준과 사람이 느끼는 악취농도는 2~5OU/m3, 빈도는 2% 이하로 한다. 셋째, 소음 항목에서 조사시기는 백로류와 어린 새들의 소리가 합해져서 소음 발생이 최대가 되는 시점을 포함하여 5월부터 8월까지 매달 소음을 측정한다. 여름철새인 백로류의 소음은 일정 기간에만 발생하기 때문에 방음벽 설치 등 인공적인 구조물 설치로 소음을 저감하기 보다는 이격거리확보, 완충녹지, 마운딩 조성 등의 방법으로 저감대책을 세운다. 기존 백로번식지가 개체군의 적정한 밀도를 유지하면서 개체군이 다른 곳으로 이동하지 않기 위해서는 영소목 관리와 취식지의 양과 질을 안정적으로 유지해주는 것이 선행되어야 한다.

탈곡기의 제작동요인이 벼의생탈곡성능에 미치는 영향 (Factors Affecting Wet-Paddy Threshing Performance)

  • 남상일;정창주;류관희
    • Journal of Biosystems Engineering
    • /
    • 제5권1호
    • /
    • pp.1-14
    • /
    • 1980
  • Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

  • PDF

이온성액체/유기화합물/초임계이산화탄소계의 상평형 (Phase Equilibria of Ionic Liquid/Organic Compound/Supercritical CO2 Systems)

  • 임방현;김종원;백상민;손보국;이용록;이철수;이흔;나춘섭;심재진
    • 청정기술
    • /
    • 제12권3호
    • /
    • pp.128-137
    • /
    • 2006
  • 초임계이산화탄소 내에서 이온성액체의 부피 변화와 상온 이온성액체와 유기화합물의 혼합물이 두 상으로 분리되는 현상을 고압 view cell을 이용하여 측정하였다. 이온성액체(ionic liquid, IL)로는 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$])와 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][$BF_4$])를 사용하였으며, 유기화합물로는 methanol과 dimethyl carbonate를 사용하였다. 일정한 양의 [bmim][$PF_6$]에 대하여 유기화합물의 양을 증가시킴에 따라 상이 나누어지는 지점인 lower critical end point (LCEP) 압력이 감소하였다. 이온성액체의 수분함량이 증가함에 따라 LCEP가 높게 나타났으며, 일정량 이상의 수분이 함유되어 있으면 LCEP가 나타나지 않았다. LCEP는 같은 부피의 [bmim][$PF_6$]에서보다 [bmim][$BF_4$]에서 약 1.0 MPa 정도 높게 나타났으며, K-point는 이온성액체의 종류와 유기화합물의 양에 따라 거의 변화하지 않았다. 초기시료 중 이온성액체([bmim][$PF_6$])의 농도 (IL/(IL+MeOH))가 7.23 mol% 보다 크면 혼합물의 LECP에서 $L_1$의 부피가 $L_2$의 부피보다 크게 나타났으며, 반대로 작으면 작게 나타났다. 이산화탄소의 존재 하에서 이온성액체의 부피변화는 온도가 증가함에 따라 감소하였으며, 313.15 와 343.15 K 사이에서는 압력이 증가함에 따라 증가하여 300 bar에서는 원래 부피의 123~126 %가 되었다.

  • PDF

산가수분해한 유채대로부터 유리당의 분리 및 이의 잔사로부터 펠릿의 제조 (Separation of Reducing Sugars from Rape Stalk by Acid Hydrolysis and Fabrication of Fuel Pellets from its Residues)

  • 양인;안병준;김명용;오세창;안세희;최인규;김용현;한규성
    • 한국자원식물학회지
    • /
    • 제27권1호
    • /
    • pp.60-71
    • /
    • 2014
  • 본 연구는 유채의 바이오리파이너리 원료화 가능성을 확인하기 위하여 유채대를 DW, AA, OA, SA 및 SH 용액에 침지하였다. 먼저 침지 유채대의 원소를 분석한 결과, 침지를 통하여 질소, 황, 염소의 함량이 효과적으로 감소되는 것을 확인하였다. 이 외에 침지액의 농도와 침지시간을 실험인자로 침지액 내에 존재하는 glucose, xylose, arabinose와 같은 유리당의 양을 조사하였는데, DW- 및 SH-침지액에서는 각각 xylose와 sucrose만 그리고 SA- 및 OA-침지액에서는 소량의 glucose만 검출되었다. 그러나 AA-침지액에서는 많은 양의 glucose와 소량의 arabinose까지 분석되었다. 한편, 유채대 침지에 사용된 산용액의 종류와 농도(1%, 2%)에 따른 glucose 양을 분석한 결과, AA를 침지액의 조제를 위한 산으로 사용하고 AA의 농도를 1%로 조절하는 것이 유채대로부터 효과적으로 glucose를 가수분해할 수 있는 조건인 것으로 조사되었다. 침지시간의 영향을 보면, 72 hr-침지에서 가장 많은 양의 glucose가 검출되었으며, 120 hr까지의 침지시간 연장은 유리되는 glucose 양에 부정적인 영향을 미쳤다. 다음으로, DW, AA, OA 용액에 침지시킨 유채대를 이용하여 펠릿을 제조하였는데, 이 때 산의 농도 그리고 침지시간(24, 72, 120 hr)을 실험 인자로 사용하였으며, 이렇게 제조된 펠릿의 함수율, 겉보기밀도, 회분량, 발열량, 내구성을 측정하였다. 침지 유채대 펠릿의 겉보기 밀도와 발열량은 무침지 유채대 펠릿과 비교하여 크게 높았으며, 실험 인자와 상관없이 EN 규격의 A등급 기준($${\leq_-}600kg/m^3$$, $${\qeq_-}14.1MJ/kg$$)을 각각 상회하였다. 유채대의 침지는 무침지 유채대의 회분량(8.9%)과 비교하여 회분량을 크게 감소시켰으며, 특히 AA-와 DW-침지가 유채대의 회분량 감소에 효과적인 것으로 나타났다. 또한 침지 유채대의 회분량은 EN 규격의 A등급 기준($${\leq_-}5.0%$$)을 만족하였다. 침지 유채대로 제조한 펠릿의 내구성은 전반적으로 무침지 유채대 펠릿(97.40%)보다 낮았으며, 특히 OA-2%에 120 hr 침지시킨 유채대 펠릿을 제외하고 나머지 조건은 EN 규격의 B등급($${\qeq_-}96.00%$$) 기준에 만족하지 않는 것으로 조사되었다. 침지 유채대의 원소 및 유리당 분석 그리고 펠릿의 품질 시험 결과를 종합하면, 1% 농도의 AA 용액에 유채대를 72 hr동안 침지시키는 것이 유채대의 바이오에탄올 및 펠릿 원료화를 위한 최적조건이라는 결론을 얻었다. 따라서 이 조건에서 1 kg의 유채대를 침지시켰을 경우, 산술적으로 바이오에탄올 생산용 원료인 50 g의 glucose를 얻을 수 있으며, 나머지 950 g의 잔사는 아그로펠릿의 원료로 사용이 가능할 것으로 생각한다. 그러나 AA-침지 유채대로 제조한 펠릿의 낮은 내구성 문제를 해결하기 위하여 세분화된 범위의 침지 조건 탐색, 목분과의 혼합 펠릿 제조, 바인더의 첨가 등과 같은 추가 연구가 수행되어야 할 것으로 생각한다.

DECO 필름 제조시 발생하는 PET·OPP 합성 폐필름 재활용의 경제성 분석 연구 (An Economic Analysis Study of Recycling PET·OPP Laminated Film Waste Generated during DECO Film Manufacturing)

  • 박미숙;김다연;양수진;이성유;김춘산;정옥진;황용우
    • 자원리싸이클링
    • /
    • 제32권3호
    • /
    • pp.57-67
    • /
    • 2023
  • 폐플라스틱에 대한 국가 간 수출입 제한에 따라, 폐플라스틱의 국내 처리 및 재활용 방안을 모색할 필요성이 커지고 있다. 본 연구에서는 국내 A 기업의 폐필름 발생 현황 및 운영 정보를 참고하여 가구 표면 마감용 sheet 및 edge 제조시 발생하는 PET·OPP 합성 폐필름의 재활용사업에 대한 비용 편익을 분석하였다. 폐플라스틱 처리는 그간 영세업체에 맡겨져 현황 파악이 어렵고 수익성 담보가 되지 않아, 재활용 기술이 있더라도 활용되기에 어려움이 따랐다. 본 연구에서는 폐플라스틱 물질 재활용 방안의 하나로써, 폐필름 발생 사업장에서 PET·OPP 합성 폐필름을 박리하여 폐PET 재활용이 이루어지는 것으로 가정하되, 재활용 비율은 정부가 「전주기 탈 플라스틱 대책」에서 제시한 수치를 활용하여 2%, 10%, 20%, 30% 재활용할 경우 비용편익을 분석하였다. 본 연구에서는 폐PET 재활용 방안으로 물리적 박리 기술이 도입되는 것으로 가정하여 폐PET 재활용 비율에 따른 비용편익분석을 수행하였다. 그 결과 폐PET의 재활용 비율이 30% 이상일 경우에만, 비용 편익비율(Benefit-cost ration, BCR)이 BCR ≥1 에 해당하여 최소비용 편익비율을 충족하는 것으로 나타났으며 이 때, BCR 값은 1.32였다. 향후 정부의 지원금 할당비율과 단가가 상향될 것으로 예상됨에 따라 비용 편익비율은 더욱 높아질 것으로 사료된다. 해당 사례는 유사 업종의 사업장에 폐PET 재활용 및 수익 창출을 위한 시범 Case가 될 것으로 기대된다.

충남 서산 대로리 일대 토양 내 석면의 광물학적 특성 (Mineralogical Characterization of Asbestos in Soil at Daero-ri, Seosan, Chungnam, Korea)

  • 김재필;정혜민;송석환;임호주;이우석;노열
    • 자원환경지질
    • /
    • 제47권5호
    • /
    • pp.479-488
    • /
    • 2014
  • 최근 석면의 효과적인 관리를 위해 산업적 이용 규제 및 석면포함물질 처리 뿐 아니라 자연발생석면의 이해와 정화 필요성도 제기되고 있다. 그러나 국내에서 암석 내 산출되는 자연발생석면의 특성이나 풍화작용을 거쳐 토양 내 잔류하는 자연발생석면에 대한 기존 연구는 미비한 상황이다. 따라서 이 연구에서는 변성퇴적암류가 기반암인 충남 서산 대로리 일대의 토양 내 자연발생석면의 존재를 확인하고 석면형(asbestiform) 광물의 산출양상 및 광물학적 특성을 통해 석면오염토양의 효과적인 정화 방안에 대해 알아보고자 하였다. 토양의 입도 분리 및 광물학적 분석을 실시한 결과, 토양 내 무게 백분율은 모래가 26~93%, 미사가 4~23%, 점토가 3~70%이며, 토성은 사토(sand), 사양토(sandy loam), 사질 식토(sandy clay), 식토(clay) 등 다양하게 나타났다. 연구 결과 모든 시료에서 석면형 투각섬석과 석면형 양기석이 함께 산출되었고 석면의 함량은 평균 1.5%로 미국 EPA 기준(1% 이상)에 따라 석면 포함물질로 분류되었다. 모래에 존재하는 투각섬석은 벽개가 발달한 주상 형태로 평균 길이 $288{\mu}m$, 폭 $69{\mu}m$, 종횡비 4.1:1의 특징을 보인 반면, 미사에 존재하는 투각섬석은 평균 길이 $49.2{\mu}m$, 폭 $5.8{\mu}m$로 크기는 더 작고 종횡비가 8.5:1인 개별섬유 형태로 나타났다. 이는 투각섬석이 풍화작용을 받으면서 종횡비는 커지고 형태는 비산이 가능한 개별 섬유로 바뀐 것으로 사료된다. $5{\mu}m$ 이상 크기의 석면형 투각섬석과 석면형 양기석의 함량은 토양 중 미사에서 가장 높게 나타났으며 이를 통해 석면오염토양 정화 시 입도 분리를 이용한 선택적인 석면 제거의 가능성을 확인하였다.

고려시대 공적·사적경호의 특성과 현대경호와의 비교연구 (A comparison study of the characteristics of private and public security service of Koryo dynasty and modern security service)

  • 이성진
    • 시큐리티연구
    • /
    • 제36호
    • /
    • pp.417-442
    • /
    • 2013
  • 고려건국 후 왕의 측근 친위군에 대한 제도적 정비는 성종시대에 이루어졌다. 건국 후 국가제도를 정비하는 법제의 확립과 더불어 2군 6위에 소속된 금군으로 거듭나게 되었다. 금군의 핵심부대는 견룡이며, 그들은 필요에 따라 국왕의 가까운 위치에서 호위하거나 궁성을 수비하고 방어하는 부대로 성장하면서 제도적 위상을 갖추었다고 볼 수 있다. 사적경호제도인 도방(都房)의 창설은 경대승이 신변 안전을 위하여 자신을 따르는 무술이 뛰어난 군졸들과 침식을 같이하면서부터 시작되었다. 경대승이 병사하고, 그의 도방도 곧 해체되었다. 최충헌은 집권 후 경대승의 도방을 부활시켜 이를 보완하고 발전시켰다. 최충헌은 그의 문하에 문무를 두루 겸비한 문객들이 많은 가운데 유능한 인물을 영입하여 군사기반을 강화하는 한편, 문신들의 조언도 받아들이며 도방의 세력을 확대하였다. 이로써 자신의 정권을 위협할 수 있는 금군의 힘을 약화시킴으로써 정치적 입지를 굳혔다. 최우의 집권 이후 6번 도방을 내외도방으로 확장, 개편하여 실질적인 도방으로 발전시켰다. 또 야별초를 창설하여 도방의 위기를 방지하는 효력도 발휘하였다. 고려시대의 공경호인 금군은 왕권이 무력화된 무신집권시대에도 그 제도는 존속되었으나, 군권을 위시한 실권은 사적경호 조직인 도방이 행사하였고 왕은 다만 상징적인 존재로 명맥을 유지하였다. 고려시대의 경호와 현대 경호를 비교해 볼 때 공통점과 차이점을 발견할 수 있으나, 경호의 본질에 있어서는 경호대상자의 안전을 보장한다는 공통점이 있다. 차이점으로는 고려시대의 충성심과 현대의 이익추구가 각각 그 특징으로 대비되며, 고려시대 경호가 무력에 의한 강압으로 다스려진 것이라면, 오늘날의 경호는 자유의지에 의한 의무와 책임감의 수행으로 이루어진 것이라고 볼 수 있다.

  • PDF

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.