• 제목/요약/키워드: $CO_2$ recovery

검색결과 842건 처리시간 0.024초

과산화수소 관장이 급성 일산화탄소중독의 회복에 미치는 영향 (Effect of Hydrogen Peroxide Enema on Recovery of Carbon Monoxide Poisoning)

  • 박원균;채의업
    • The Korean Journal of Physiology
    • /
    • 제20권1호
    • /
    • pp.53-63
    • /
    • 1986
  • 과산화수소$(H_2O_2)$가 급성 일산화탄소(CO)중독의 회복에 미치는 영향을 알아보기 위하여 가토를 1% Corktm에 30분간 노출시킨후 자연회복군, 100%산소 흡입군 및 $H_2O_2$관장군(10ml/kg의 0.5% $H_2O_2$용액을 2ml내외의 사람혈액과 함께 관장)으로 나누어, 회복기 15,30,60 및 90분에 동맥혈의 $pH,\;PCO_2,\;CO_2$ 및 HbCO 포화도를 측정하여 다음과 같은 결론을 얻었다. pH는 급성 CO중독시 3개군 모두에서 감소하였고, 회복기에는 서서히 증가하여 자연회복군과 100%산소 흡입군은 회복기 90분에 거의 회복되나, $H_2O_2$관장군에서는 pH의 회복이 다른군보다 늦었다. $PaCO_2$는 급성 Co중독시 3개군 모두에서 감소하였고, 회복기에는 서서히 증가하였으나, 자연회복군의 $PaCO_2$는 회복기 90분에 거의 회복하는데 반하여 100%산소흡입군과 $H_2O_2$관장군의 $PaCO_2$는 회복이 늦었고 회복기 90분에도 완전히 회복되지 못하였다. $PaO_2$는 급성 Co중독시 약간 감소하였다가 회복기에는 회복기 15분부터 급격히 증가하였고 회복기 90분까지 대조치보다 높은 $PaO_2$를 유지하였다. 회복기동안 $H_2O_2$관장군의 $PaO_2$$102{\sim}107mmhg$로 자연회복군보다 약 10 mmhg 높은 수준을 보였다. HbCO 포화도는 급성 CO중독시 $54{\sim}72%$까지 증가하였다. 회복기에는 $H_2O_2$관장군의 HbCO 포화도의 회복이 자연회복군이나 100%산소 흡입군보다 빨랐으며, 100%산소 흡입군은 회복기 30분에서 60분사이에 자연회복군보다 더 빠른 회복을 보였다. 이상의 결과에서 0.5% $H_2O_2$관장은 CO중독시 혈액의 산소분압을 어느정도 증가시킬 뿐 아니라 혈색소와 결합된 CO의 해리를 촉진시켜, 단독요법 또는 산소요법과 병행하여 사용할 때 급성CO중독에 효과적인 치료법이 될 수 있을 것으로 사료된다.

  • PDF

CCS와 연계한 석유회수증진 기술 동향 및 현장사례 분석 (A Review of Enhanced Oil Recovery Technology with CCS and Field Cases)

  • 박혜리;장호창
    • 한국가스학회지
    • /
    • 제27권3호
    • /
    • pp.59-71
    • /
    • 2023
  • 온실가스 감축과 탄소 중립의 실현을 위해서 탄소의 포집, 저장(carbon capture, and storage, CCS) 기술은 매우 중요하다. CCS는 CO2 저장을 중점적으로 함으로써, 포획된 CO2를 지하 저류층 내부에 영구적으로 보관하는 역할을 한다. CO2--EOR(enhanced oil recovery)은 CCS의 한 형태로, 오일 회수 촉진을 위해 CO2를 지하 내부로 주입시켜 잔류 오일 회수에 도움을 줄 뿐만 아니라 CO2가 지하에 저장되어 탄소 중립에도 기여하는 기술이다. 이 CO2-EOR은 혼화공법과 비혼화공법으로 분류하며 혼화공법의 대표적인 방식인 CO2-WAG(water alternating gas)는 물과 CO2를 저류층 내부에 교대로 주입하여 오일을 생산하고 CO2를 저장하는 공법이다. WAG 방식은 주입 유체의 돌파를 조절할 수 있어 오일 회수에 유리한 특징을 보이며, 흡입과 배출 과정 중에 상대투과도의 이력현상을 유도해 CO2의 잔류 격리량을 확대할 수 있다. 본 연구에서는 CO2-EOR 과정에서의 석유회수증진 효과와 CO2가 지중에 저장되는 메커니즘을 설명하였으며, CCS와 연계한 CO2-EOR 적용 사례를 소개하였다.

An Energy Recovery Circuit for AC Plasma Display Panel with Serially Coupled Load Capacitance-SER1

  • Yang, Jin-Ho;Whang, Ki-Woong;Kang, Kyoung-Ho;Kim, Young-Sang;Kim, Hee-Hwan;Park, Chang-Bae
    • Journal of Information Display
    • /
    • 제2권4호
    • /
    • pp.63-67
    • /
    • 2001
  • The switching power loss due to the panel capacitance during sustain period in AC PDP driving system can be minimized by using the energy recovery circuits. We proposed a new energy recovery circuit, SER1 (Seoul national univ. Energy Recovery circuit 1st). The experimental results of its application to a 42-inch surface discharge type AC PDP showed superior performance of SER1 in energy recovery efficiency and low distortion voltage waveform. Energy recovery efficiency of SER1 was measured up to 92.3 %, and the power dissipation during the sustain period was reduced by 15.2 W in 2000 pulse/frame compared with serial LC resonance energy recovery circuit.

  • PDF

석탄층 메탄가스 회수증진공법에서 CO2/N2 주입가스의 혼합 비율 최적 설계 (Optimum Design on the Mixed Ratio of Injection Gas with CO2/N2 in Enhanced Coalbed Methane Recovery)

  • 유현상;김영민;이정환
    • 한국가스학회지
    • /
    • 제21권2호
    • /
    • pp.1-9
    • /
    • 2017
  • 최근 석탄층 메탄가스(Coalbed Methane, CBM)의 회수증진을 위해 석탄층에 $CO_2$$N_2$ 가스를 주입하는 ECBM (enhanced coalbed methane recovery)공법이 주목받고 있다. ECBM공법은 일반적인 생산기술인 탈수(dewatering)공법에 비해 회수율이 높지만 주입가스의 특성에 따라 메탄가스의 생산 효율이 다르므로, 이를 고려한 주입가스의 혼합 비율 분석이 필요하다. 본 연구에서는 ECBM공법에서 주입가스의 혼합 비율이 메탄가스 회수에 미치는 영향을 분석하고자, CBM 저류층 모델을 구축하고 주입가스의 혼합비율에 따른 메탄가스 회수량 분석과 경제성 평가를 수행하였다. 그 결과, ECBM공법 적용 시 탈수공법을 적용하였을 때 보다 약 2배의 회수율 향상을 보였으며, 혼합가스 주입 시 $CO_2$ 10%와 $N_2$ 90%일 때 메탄가스의 회수량이 가장 높게 나타났다. 그러나 탄소배출권 거래이익, 주입가스의 비용 및 재생산된 $N_2$ 가스 처리비용 등을 고려한 경제성 평가 결과, 주입가스의 혼합비율이 $CO_2$ 20%와 $N_2$ 80%일 때 최종생산이익이 가장 높게 나타남을 확인하였다. 따라서 향후 ECBM 공법 적용 시 메탄가스의 회수율뿐만 아니라 경제성을 고려한 기준으로 주입가스의 혼합비율을 설계해야 한다.

Sweep Co-Distillation 법에 의한 산화방지제의 추출법 (Extraction Method of Antioxidants in Soybean Oil)

  • 황혜정
    • 한국식품영양학회지
    • /
    • 제12권4호
    • /
    • pp.358-363
    • /
    • 1999
  • This study was conducted to evaluate the extraction methods for the determination of antioxidants in soybean oil. Recovery rates of various antioxidants in soybean oil showed similar rates as 80.4~102.1% by solvent/solvent extraction method and 89.9~106.4% by sweep co-distillation method except 46.6~61.2% of PG at corresponding spiked concentractions. The maximun recovery rates of antioxidnts were obtained when extraction time and extraction temperature used in UNITREX were 20min and 21$0^{\circ}C$ respectively. In the recovery rates with the activation of florisil when 2% ofwater was added to florisil the highest recovery rates for TBHQ, BHA, BHT were obtained by sweep co-distillation met-hod. Therefore sweep co-distillation method showed less solvent simple operation and high recovery rate compared with solvent/solvent extraction method.

  • PDF

WC/Co 초경합금 가공 슬러지로부터 알칼리침출 정련공정에 의한 W 회수 (Recovery of Tungsten from WC/Co Hardmetal Sludge by Alkaline Leaching Hydrometallurgy Process)

  • 이길근;권지은
    • 한국분말재료학회지
    • /
    • 제23권5호
    • /
    • pp.372-378
    • /
    • 2016
  • This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of $WO_3$ and $CoWO_4$. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above $90^{\circ}C$ and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of $Na_2S{\cdot}9H_2O$. The tungsten is precipitated as high-purity $H_2WO_4{\cdot}H_2O$ by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.

온실용 축열 연소기형 이산화탄소 발생기의 배기 및 열회수 특성 (Emission and heat recovery characteristics of heat recovery and combustor-type CO2 generator for greenhouses)

  • 최병철;이정현
    • 동력기계공학회지
    • /
    • 제18권4호
    • /
    • pp.52-59
    • /
    • 2014
  • The purpose of this study is to evaluate the performance of after-treatment equipment and thermal storage devices for a heat recovery and combustor-type $CO_2$ generator fuelled a kerosene. To reduce the levels of harmful exhaust gases produced by a $CO_2$ generator, a catalyzed particulate filter(CPF) has been selected as an after-treatment device, by considering back pressure and exhaust gas temperature. The CO conversions of the catalyzed SiC filter(full plugging) were 92%, and the concentration of PM(particulate matter) was near ambient. A thermal recovery device was used to recover 13% of the heat energy from the exhaust gas through heat exchangers installed on the exhaust line of the $CO_2$ generator. 69% of the moisture within the exhaust gases was removed by condensing water, in order to minimize excessive humidity within the greenhouse.

고온 고압 스팀을 주입하는 SAGD 공정에서 CO2주입이 오일샌드 역청 회수율에 미치는 영향 (Effect of CO2 Injection in SAGD Process for Oil Sand Bitumen Recovery)

  • 송병진;유난숙;이재훈;이철위
    • 공업화학
    • /
    • 제25권3호
    • /
    • pp.262-267
    • /
    • 2014
  • 오일샌드에서 비투맨(bitumen)을 회수하는 지하회수방식 중 가장 많이 사용하는 기술인 SAGD (steam assisted gravity drainage)공정으로부터 비투맨의 회수율을 향상시키고자 스팀과 함께 주입한 첨가제의 효과와 매커니즘에 대해서 연구하였다. 실제 광구에서 쓰이는 SAGD공정을 150 : 1로 축소한 실험실 규모의 모사장비가 사용되었으며, 지하 박층을 모사할 수 있는 장치(이하 GM, geological model)가 사용되었다. 초중질유와 글래스비드(glass bead 1.5 mm)의 혼합물은 오일샌드의 모사재료로 사용되었다. 첨가제로서 $CO_2$가 사용되었으며, 스팀 챔버(steam chamber)의 성장 변화를 비교 분석하였다. $CO_2$의 주입방식에 따른 효과를 확인하기 위하여 스팀과 $CO_2$를 연속 주입하는 실험($cCO_2$-SAGD)과 순차적으로 주입하는 실험($sCO_2$-SAGD)을 실시하였다. 그 결과 $sCO_2$-SAGD 실험의 경우 Control 실험 대비 오일 회수율은 60.2%에서 69.3%로 향상되었으며 cSOR의 경우 7.1에서 6.0으로 낮아졌다. 반면에 $cCO_2$-SAGD 실험의 경우 60.2%에서 57.6%, 7.1에서 7.3으로 증가 되었다.

Thermal Recovery Characteristics of a CO2 Mixture Gas Circuit Breaker

  • Oh, Yeon-Ho;Song, Ki-Dong;Lee, Hae-June;Hahn, Sung-Chin
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권4호
    • /
    • pp.969-973
    • /
    • 2016
  • Interruption tests were conducted using the same circuit breaker for an initial pressure of SF6 0.5 MPa (gauge pressure) and CO2 mixture 1.0 MPa, 0.8 MPa, and 0.6 MPa. The pressure-rises in the compression and thermal expansion chambers were measured for verifying the computational results using a simplified synthetic test facility. Further, the possibility of the CO2 mixture substituting SF6 gas was confirmed. Moreover, in view of the thermal recovery capability, it has also been confirmed that the pressure of the CO2 mixture can be reduced almost to the same value as that of the SF6 gas by optimizing the design parameters of the interrupter.

가스 하이드레이트 형성 원리를 이용한 연소전 탈탄소화 연구 (Pre-Combustion Capture of Carbon Dioxide Using Principles of Gas Hydrate Formation)

  • 이현주;이주동;김양도
    • 한국재료학회지
    • /
    • 제18권12호
    • /
    • pp.650-654
    • /
    • 2008
  • The emission of carbon dioxide from the burning of fossil fuels has been identified as a major contributor to green house emissions and subsequent global warming and climate changes. For these reasons, it is necessary to separate and recover $CO_2$ gas. A new process based on gas hydrate crystallization is proposed for the $CO_2$ separation/recovery of the gas mixture. In this study, gas hydrate from $CO_2/H_2$ gas mixtures was formed in a semi-batch stirred vessel at a constant pressure and temperature. This mixture is of interest to $CO_2$ separation and recovery in Integrated Coal Gasification (IGCC) plants. The impact of tetrahydrofuran (THF) on hydrate formation from the $CO_2/H_2$ was observed. The addition of THF not only reduced the equilibrium formation conditions significantly but also helped ease the formation of hydrates. This study illustrates the concept and provides the basic operations of the separation/recovery of $CO_2$ (pre-combustion capture) from a fuel gas ($CO_2/H_2$) mixture.