• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.143-148
• /
• 2001

We measured emission indices for $NO_x$, CO, temperature and radical characteristics for partially premixied flames formed by suction & blow fans air condition. At sufficiently high levels of partial premixing a double flame structure consisting of a rich premixed inner flame and outer diffusion flame was established similar to that previously observed in premixed flames. $NO_x$, Temperature, CO values were experimented with approximately constant air flow rate and decreasing equivalence ratios. The reduction in $NO_x$ and temperature at suction condition as compared with that for blow condition was approximately 20%, but on the contrary, CO emission was increased. In addition, We measured temperature distributions and found that temperature increased continuously with increasing partial premixing. We also estimated CH, $C_2$ radical intensity. CH and $C_2$ radicals provide evidence that, for the present measurement, CH and $C_2$ radicals intensity was associsated with their premixed component. And we observed stronger $C_2$, CH radicals intensity at suction conditions than blow conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.126-130
• /
• 1985

Photoinhibition studies were conducted with ginseng (Panax ginseng) grown under shade and tobacco (N. tobaccum cv. Bulgaria) grown under full sunlight. The plants were exposed to light intensity of 580, 1280, 1770, 2580 ${\mu}$E/㎡/sec in normal air for 3.6 9 hours. Light saturation of ginseng was observed at 550 ${\mu}$E/㎡/sec and that of tobacco was at 1600 ${\mu}$E/㎡/sec. Tobacco exposed to high light intensity and long duration of light irradiation didn't show entire reduction in photosynthetic capacity. But in ginseng, 20.3% of photosynthesis was reduced in light intensity of 2,580 ${\mu}$E/㎡/sec during 9 hours. Light response in photosynthesis differed considerably between tobacco and ginseng, and ginseng exposed to high light intensity showed remarkable reduction in photosynthesis. The extent of photoinhibition of ginseng was dependent on the length of exposure to the high light intensity. Stomatal resistance of ginseng seemed not to be changed by photoinhibition but mesophyll resistance was increased.

• Journal of Korea Water Resources Association
• /
• v.37 no.2
• /
• pp.163-172
• /
• 2004

In this paper, the sub-soil storage system for utilizing urban instream flow of rainfall runoff was developed and examined through experiments. The artificial rainfall facility and sub-soil storage were installed in the experimental area. The effect of the water qualify improvement and the storage effect were analyzed through the several experiments. Through the experiments of rainfall intensity variation, which are the rainfall intensity of 20mm/hr, 30mm/hr, 40mm/hr, 50mm/hr was indicated SS concentration can be reduction until 68％. Also, the ration of the storage volume is varied from 42.8％∼79.9％ based on the rainfall intensity. The reduction rate of the BOD, CO $D_{Mn}$, SS, T-N, T-P was 30％, 42％, 68％, 39％, 26％. As the result, water quality of runoff and efficient of runoff reduction by the system are much improved. The rainfall runoff with the installation of sub-soil storage could be used for instream flow.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.211-235
• /
• 2012

This paper presents an alternative decomposition technique to identify the relative importance of factors associated with changes in $CO_2$ emissions by using directional distance function to model the joint production of desirable and undesirable outputs. The key feature of the proposed approach is the introduction of fossil and non-fossil fuel energy input efficiencies, productivity change and emission intensity change. For the 27 OECD countries as a whole, the empirical results indicate that economic growth is the most important contributor to $CO_2$ emissions increase, while efficiency change is the most important component to $CO_2$ emissions reduction between 1980 and 2007. For more extensive insights, this paper divided 3 groups according to the emission growth rate and find out that high emission countries show relatively low production efficiencies and technical changes contributing $CO_2$ emissions increase. The results also provide that more strict environmental regulations are needed to improve the pollution intensity in these countries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.191.2-191.2
• /
• 2014

Cu/ZnO/$Al_2O_3$ is widely used methanol synthesis catalyst at elevated pressures P (50 to 100 bar) and temperatures T (473 to 573 K) using $CO_2$, CO, $H_2$ syngas mixture. Although Cu step and planar defects have been regarded as active sites in this catalyst, detailed $CO_2$ hydrogenation procedure has been still unknown and debated as well as initial intermediate. In this study, we investigated the mechanism of $CO_2$ hydrogenation on Cu(111) model surface at P (1 bar) and T (298 to 450 K) using reflection absorption infrared spectroscopy (RAIRS). Two distinct formates by hydrogenation of $CO_2$, on step and on terrace, show different behavior with elevating temperature. The peak intensity of on step formate was continuously decreased above 360 K up to 450K in contrast to the increase of on terrace formate. These phenomena are strong possibilities that the formate is initial intermediate and is desorbed by hydrogenation reaction because thermal desorption temperature of formate (~470 K) is much higher than desorption of on step formate. And the formate production peak of on step site was weakly correlated with CO formation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.349-352
• /
• 2001

Dental laser provides many advantages to the clinicians. Those are excellent hemostatic effect, good operating sight, minimal adjacent tissue injury, reduction of postoperative swelling & pain, reduction of postoperative infection, reduction of scar tissue & contraction, etc. The purpose of this study is to observe how these advantages work after surgical extraction of impacted third molar. From march 2000 to july 2000, we have randomly divided the patients who had been surgically extracted unilateral impacted third molar into two groups. The first group comprised $CO_2$ laser illumination with 3 watts, defocusing & continuous mode, rotating motion for about 3 minutes after finishing of surgical extraction & suture. The other group patients were not irradiated. The medications in two groups were same. We measured pain, swelling and trismus three times(pre-operation, first day after operation, and 7th day after operation). The number of the patients who had measured three times all are 64, laser irradiated groups are 36 and non-irradiated groups are 28. The age ranged from 19 to 50, with a mean of 27.9 years. The operative time ranged from 3 minutes to 50 minutes, with a mean of 12.1 minutes. In the $CO_2$ laser group, the pain intensity of the 7th day after operation was still increased significantly comparing with that of the pre-operation and the distance which were measured for the swelling was different significantly. In the other group, the mouth opening limitation was still decreased significantly.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.

• Architectural research
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2013

The Korean government recently has rediscovered the potential value of Han-Ok, the Korean traditional house, as an eco-friendly building. In order to objectively verify the environmental performance of Han-Ok as a low carbon green building, this paper suggests the analysis method of GHG emission load of Korean traditional house, based on Life Cycle Assessment, which is commonly abbreviated to "LCA". The environmental impacts caused by building construction and operation can be analyzed through the sum of input and output data from every phase. The study particularly describes the GHG reduction effect by using traditional building materials such as wood products, traditional clay roof tiles, and mud, which are mainly used to construct Han-Ok. Also the study proposes the method for comparative analysis of quantity of GHG emissions in building's entire life cycle so that the data can be used as a reliable basis to optimize the environmental performance of building.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.474-480
• /
• 2017

This study was to estimate the reduction effect of nonpoint source pollutants according to the rainfall intensity and drainage of infiltration grate inlet. Soil infiltration flow was measured on-site and SS load by the filter part was calculated by the experimental data in laboratory reactor test. Soil infiltration flow was measured to be about $1m^3/hr$ in soil condition saturated with water. The filter part of the infiltration grate inlet was a hydraulic equipment unhindered by soil infiltration on the bottom of the storage tank, because the infiltration flow was measured to be about $3m^3/hr$ continuously in the closing infiltration hole condition. Infiltration flow and SS load were over about $1m^3/hr$ and 1.71 kg according to laboratory results by the filter part using the artifical sample. Therefore, the above values could be presented as the limitted value to start the reduction of filtration effect. Reduction efficiencies of SS load by the filter part for the rainfall intensity were about 87 % at 5 mm/hr and about 61 % at 10 mm/hr in consideration of one infiltration grate inlet got the drainage area about $200m^2$. The reduction efficiency of nonpoint source pollutants was very effective in the first flush rainfall. However, the reduction efficiency by rainfall density was higher than by flow.

• Journal of Navigation and Port Research
• /
• v.48 no.2
• /
• pp.97-103
• /
• 2024

As there is growing concern about the environmental impact of greenhouse gas emissions from ships, the International Maritime Organization (IMO) has introduced several regulations targeting reductions in carbon dioxide emissions of 50% by 2050. This study pays particular attention to the carbon intensity indicator (CII) and investigates the impact of slow steaming, one of the short-term measures in the regulation, on containership operations. To this end, a dataset of 8 containerships with various ages and sizes was collected. Based on operation data in 2021, the CII ratings of the containerships were estimated in the business-as-usual scenario for the 2023-2030 period. Then, the speed reductions required to keep the minimum CII rating were calculated for individual containerships. Finally, working day losses resulting from the speed reductions were calculated. The findings in this study were threefold. First, it was found that containerships will undergo degradation in the CII rating every 3 or 4 years without slow steaming. Second, a speed reduction of 2 knots between 2023 and 2030 is required to keep the minimum CII rating. Finally, speed reductions result in the loss of as many as 6 or 7 working days per year.