• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1163-1168
• /
• 2011

Compared with the spark-ignition gasoline engine, the compression-ignition diesel engine has reduced fuel consumption due to its higher thermal efficiency. In addition, this reduction in the fuel consumption also leads to a reduction in $CO_2$ emission. Diesel engines do not require spark-ignition systems, which makes them less technically complex. Thus, diesel engines are very suitable target engines for using biofuels with high cetane numbers. In this study, the spray characteristics of biofuels such as vegetable jatropha oil and soybean oil were analyzed and compared with those of diesel oil. The injection pressures and blend ratios of jatropha oil and diesel oil (BD3, BD5, and BD20) were used as the main parameters. The injection pressures were set to 500, 1000, 1500, and 1600 bar. The injection duration was set to $500{\mu}s$. Consequently, it was found that there is no significant difference in the characteristics of the spray behavior (spray angle) in response to changes in the blend ratio of the biodiesel or changes in the injection pressure. However, at higher injection pressures, the spray angle decreased slightly.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.423.2-424
• /
• 2002

The present study evaluates the pharmacokinetics and tissue distribution of GX-12, a multiple plasmid DNA vaccine for the treatment of HIV-1 infection. PCR analysis after i.v. injection in mice showed that plasmid DNA was rapidly degraded in blood with a half-life of 1.34 min and was no longer detectable at 90 min post-injection. Plasmid DNA concentration also rapidly declined at the injection site after i.m. injection. with less than 1 % of the initial concentration remaining at 90 min post-injection. (omitted)

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3090-3095
• /
• 2008

In this study, variable compression ratio system(VCRS) was applied on the heavy-duty CNG engine and the characteristics of power and emission was investigated according to the increasing of compression ratio. As compression ratio increasing, the increasing of thermal efficiency in direct injection is three times higher than that in port injection. The emission of HC and CO in direct injection is reduced about 14.2%, 17.7% but NOx is increased because of increasing temperature in cylinder.

• Journal of Ginseng Research
• /
• v.17 no.1
• /
• pp.29-34
• /
• 1993

This study was undertaken to investigate the effect of red ginseng extract (5.5 mg/mouse ip) on the activities of superoxide dismutase (SOD), peroxidase and catalase in the liver of the gamma ray irradiated male mice. The experimental groups consisted of control, red ginseng extract injection group, irradiation (8 $Gy^{60}$Co) group and red ginseng extract injection after irradiation group. in red ginseng extract injection group, SOD, peroxidase and catalase activities were similar to that in the control group. In irradiation group SOD, peroxidase and catalase activities increased progressively until the 2nd day after the treatment and then decreased thereafter, whereas red ginseng extract injection after irradiation group recovered more rapidly than irradiation group. The above results suggested that red ginseng extract injection after irradiation group have the recovery effects on the activities of SOD, peroxidase and catalase after radiation injury in the liver of male mice.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.223-232
• /
• 2018

The viscous force of fluids and the capillary force acting on the pore network of the porous media are important factors determining the immiscible displacement during geological $CO_2$ sequestration, these were directly affected by geological formation conditions and injection conditions. This study aimed to observe the migration and distribution of injected fluid and pore water, and quantitatively investigate displacement efficiency on various injection temperatures. This study aimed to perform micromodel experiments by applying n-hexane used as a proxy fluid for supercritical $CO_2$. In this study, immiscible displacement process from beginning of n-hexane injection to equilibrium of the distribution of the n-hexane and pore water was observed. The images from experiment were used to observe the displacement pattern and estimate the areal displacment efficiency of the n-hexane. For investigate the affects of the injection temperatures on the migration in macroscopic, migration of n-hexane in single pore was analyzed. The measurement revealed that the displacement efficiency at equilibrium state decreases as the temperature increases. The result from experiments indicate that the temperatures can affect the displacement pattern by changing the viscous forces and the capillary forces. The experimental results could provide important fundamental information on reservoir conditions and fluid injection conditions during geological $CO_2$ sequestration.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.9-14
• /
• 2017

The design and manufacturing tehcnology of IC sockets beyond 0.3mm pitch were presented. We compared the developed IC socket with the conventional one especially on the core metal-insulation part. Advanced machining techniques were employed to provide high precision. Our wire electrodischarge machining and high speed machining centers were able to maintain the micro-scale precision. We performed an injection molding analysis using a commercial analysis tool to predict the performance of the developed IC socket. We found that the solidification of the plastic resin and the high level of the clamping force are responsible for the defects such as incomplete filling and short shot. From these results, we modified the IC socket and successfully remove the defects. We were also able to find out that the new design socket needs less maintenance cost.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2175-2180
• /
• 2008

Oxy-fuel combustion has been gaining its significance as a means of migrating the green house effects. Some experimental measurements were conducted to investigate the characteristics of oxy-fuel combustion and to aid a fundamental design of a lab-scale oxy-fuel combustor with a coaxial burner. CO emission was measured along the combustor centerline while combustion of methane and oxygen diluted by CO2 took place. Substitution of CO2 with N2 indicates a possibility that some CO is formed by dissociation of CO2. Some parametric tests were also performed to see the mixing effects of reactant gases on CO emission by changing the gas injection velocity at the burner nozzles with various heat loads. The overall results indicate that CO emission was reduced when the reactants are injected at higher velocities of similar magnitude.

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.4-11
• /
• 2006

The idea of $CO_2$ sequestration in the ocean is proposed to be an effective mitigation strategy to counteract potential global warming due to the greenhouse effect. Therefore, in the present study, calculations of the dissolution behavior of $CO_2$ hydrate when liquid carbon dioxide is released at 1,000m and 1,500m in depth are performed. The results show the liquid $CO_2$ injected in the ocean becomes $CO_2$ bubble at between 350 m in depth, and the injection from a moving ship is a more effective method of dissolution than through a fixed pipeline. It so also noted that the ultimate plume generated from $CO_2$ bubbles repeats expansion and shrinking due to the peeling from a fixed pipeline.

• Archives of Pharmacal Research
• /
• v.26 no.2
• /
• pp.168-172
• /
• 2003

Radiation synovectomy is one of the most useful methods for treating patients with refractory synovitis because of its convenience, long-term effects, repeatability and the avoidance of surgery. In this study, we investigated the toxicity, stability and biodistribution of a rhenium-188 ($^{188}$Re)-tin colloid to evaluate its suitability as a synovectomy agent. Twenty four hours after injecting the $^{188}$Re-tin colloids (74 KBq/0.1 mL) into the tail vein of ICR mice, most of the $^{188}$Retin colloidal particles was found in the lungs. In addition, there were no particle size changes at either room temperature or at $37^{\circ}C$ after injecting the $^{188}$Re-tin colloids in human plasma and synovial fluid. In vitro stability tests showed that the $^{188}$Re-tin colloid remained in a colloidal form without a critical size variation over a 2-day period. We investigated the leakage of $^{188}$Retin colloids from the intraarticular injection site with gamma counting in New Zealand white rabbits. The $^{188}$Re-tin colloids (55.5 MBq/0.15 mL) were injected at the cavum articular and the mean retention percentage of the $^{188}$Re-tin colloid was 98.7% for 1 day at the injection site, which suggests that there was neither change in the particle size nor leakage at the injection sites. In the biodistribution study with the SD rats, the liver showed the highest radioactivity (0.0427% ID/organ) except for the injected knees (99.49%). In the SD rats, mild toxicities including the skin or a synovium inflammation were observed as a result of a radioactivity of 15 mCi/kg at the intraarticular injection site. However, there was no systemic toxicity. In the Ovalbumin (OVA)-induced arthritic rabbits, the $^{188}$Re-tin colloid improved the macroscopic, the histological score and reduced the knee joint diameter when compared to the arthritic control. In conclusion, a $^{188}$Re-tin-colloid is considered as a strong candidate for radiation synovectomy with a superior efficacy and safety.

• Journal of ILASS-Korea
• /
• v.7 no.1
• /
• pp.7-13
• /
• 2002

This paper is study on simultaneous reduction of NOx and soot for direct injection diesel engine using high and low cetane fuels. The stratified injection system was applied for diesel engine to use high and low cetane fuel. In this study, diesel fuel was used as high cetane fuels, methanol was used as low cetane fuels. Some parts of the injection system, ie. Nozzle holder. delivery vale, was remodeled to inject dual fuel sequentially from one injector. The leak injection quantity ratio of dual fuel was certificated by volumetric ratio at injection quantity experiment. According as concentration of low cetane fuel was varied, combustion experiment was performed using Toroidal and Complex chamber. Also, exhaust gas and fuel consumption were measured at the same time. Simultaneous reduction of NOx and soot was achieved at complex chamber regardless of concentration of low cetane fuel. However, according as concentration of low cetane fuel was increased, THC and CO was increased.