• 제목/요약/키워드: $CO_2$ generator

검색결과 215건 처리시간 0.031초

레미콘회수수를 이용한 액상탄산화 Pilot plant(System) 최적화에 관한 연구 (Study on optimization of liquid carbonation pilot plant (system) using sludge water of ready-mixed concrete)

  • 김재강;신재란;김해기;강호종
    • 한국응용과학기술학회지
    • /
    • 제33권2호
    • /
    • pp.239-246
    • /
    • 2016
  • 본 연구에서는 건축폐기물로 분류되는 레미콘회수수를 재활용함과 동시에 지구온난화의 주범인 $CO_2$의 자원화를 위한 시스템의 공정최적화를 진행하였다. 레미콘회수수를 이용한 액상탄산화 반응에서 가장 중요한 공정은 $Ca^{2+}$를 용출하는 공정이다. 일정량의 레미콘회수수를 이용해 고순도의 $CaCO_3$을 생성하기 위해 $Ca^{2+}$ 용출시 질산에 의해 낮아지는 pH 농도를 기준으로 실험을 진행하였으며, $CO_2$는 발전기 배기가스를 이용해 MEA용액에 포집하였다. 본 연구를 통해 1톤의 레미콘회수수에서 최대 11 kg의 $CaCO_3$를 합성할 수 있었다. 생성된 $CaCO_3$ 분석결과 제지용으로 사용 가능한 것을 확인하였다.

DLL을 이용한 다중 변조 비율 확산대역클록 발생기 (Spread Spectrum Clock Generator with Multi Modulation Rate Using DLL (Delay Locked Loop))

  • 신대중;유병재;김태진;조현묵
    • 전기전자학회논문지
    • /
    • 제15권1호
    • /
    • pp.23-28
    • /
    • 2011
  • 본 논문에서는 CMOS 회로를 이용한 스프레드 스펙트럼 클록 발생기(SSCG)를 제안하고 구현하였다. 지연고정루프(DLL)의 저역통과필터(LPF)에 스프레드 스펙트럼 클럭 변조 로직에 의해 조절되는 전하펌프를 연결하여 전압 제어지연로직(VCDL)에 가해지는 제어전압을 조절함으로써 주파수의 변화를 유도하는 방법을 사용하였다. 이와 같은 구조에서는 변조 비율을 조절하기 위한 부가적인 회로가 필요없기 때문에 레이아웃 면적이 작아지게 되고 전력소모가 작아지는 장점을 갖는다. 스프레드 스펙트럼 클록 발생기는 UMC 0.25um 공정을 이용하여 시뮬레이션 및 레이아웃을 수행하였으며 전체 면적은 290um${\times}$120um^2 이다.

A Stable Operation Strategy in Micro-grid Systems without Diesel Generators

  • Choi, Sung-Sik;Kang, Min-Kwan;Lee, Hu-Dong;Nam, Yang-Hyun;Rho, Dae-Seok
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권1호
    • /
    • pp.114-123
    • /
    • 2018
  • Recently, as one of the countermeasures to reduce carbon dioxide($CO_2$) for global warming problems, operation methods in micro-grid systems replacing diesel generator with renewable energy sources including wind power(WP) and photovoltaic(PV) system have been studied and presented in energetic manners. However, it is reported that some operation problems in micro-grid systems without diesel generator for carbon-free island are being occurred when large scaled WP systems are at start-up. To overcome these problems, this paper proposes an operation strategy in micro-grid systems by adapting control devices such as CVCF(constant voltage constant frequency) ESS(energy storage system) for constant frequency and voltage regulation, load control ESS for balancing demand and supply and SVC(static-var compensator) for reactive power compensation. From the simulation results based on the various operation scenarios, it is confirmed that the proposed operation strategy in micro-grid systems without diesel generators is a useful tool to perform a stable operation in micro-grid systems without diesel generator and also make a contribution to reduce carbon dioxide in micro-grid systems.

알칼리 수전해 수소제조의 이온 교환막 변화 분석 (A Study on the Variation of Anion Exchange Membrane of Hydrogen Generator of Alkaline Electrolysis)

  • 변창섭;임수곤;김수곤;신훈규
    • 한국전기전자재료학회논문지
    • /
    • 제26권7호
    • /
    • pp.563-566
    • /
    • 2013
  • We investigated the variation of anion exchange membrane of hydrogen generator of alkaline electrolysis. We detected the variation of elements and change of anion exchange membrane using EDS and FE-SEM. We detected two different sites of membrane because of different structure of membrane. $Sp_1$ shows that the distribution ratio of C, O, Al is 98% very higher than $Sp_2$ of 78%. Especially, the main elements of STS316 which is P, S, Fe, Ni were more detected at $Sp_2$ than $Sp_1$. We think that this result depends on the structure of membrane. This also affect the resistance, lifetime of membrane and decrease the efficiency of hydrogen production. We hope that this article is a foundation of developing of hydrogen production technology.

$CO_2$ 배출량제약을 고려한 최적전원구성 (The Best Generation Mix considering CO2 Air Pollution Constraint)

  • 이상식;트란트룽틴;권중지;최재석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.149-151
    • /
    • 2005
  • A new approach considering CO2 air pollution constraints in the long-term generation mix is proposed under uncertain circumstances. A characteristic feature of the presented approach in this paper is what effects give the air pollution constraints in long term best generation mix. Best generation mix problem is formulated by linear programming with fuel and construction cost minimization with load growth, reliability (reserve margin rate) and air pollutionconstraints. The proposed method accommodates the operation of pumped-storage generator. It was assumed in this study that the construction planning of the hydro power plants is given separately from the other generation plans. The effectiveness of the proposed approach is demonstrated by applying to the best generation mix problem of KEPCO-system, which contains nuclear, coal, LNG, oil and pumped-storage hydro plant multi-years.

  • PDF

2MW급 이중여자 유도형 풍력발전기용 Power Conditioner Unit 개발 (Development of Power Conditioner Unit for 2MW Doubly-Fed Induction-type Wind Generator)

  • 정병창;김희중;정용호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1236-1237
    • /
    • 2007
  • 본 논문에서는 이중여자 유도형 풍력발전기를 제어하기 위한 Power Conditioner Unit을 개발하였다. Power Conditioner Unit은 크게 전력변환을 담당하는 컨버터와 제어기로 구성된다. 컨버터는 2대를 back-to-back 구조로 연결하여 전력을 양방향으로 제어한다. 제어기는 계통의 전압 상태, 발전기의 회전속도와 발전량, 그리고 계통 운영자의 요구에 따라서 발전기의 발전량과 발전 시스템의 출력 역률 또는 계통전압을 제어한다.

  • PDF

A Spread Spectrum Clock Generator for SATA II with Rounded Hershey-Kiss Modulation Profile

  • Moon, Yong-Hwan;Lim, Wan-Sik;Kim, Tae-Ho;Kang, Jin-Ku
    • 전기전자학회논문지
    • /
    • 제15권2호
    • /
    • pp.129-133
    • /
    • 2011
  • A spread spectrum clock generation is an efficient way to reduce electro-magnetic interference (EMI) radiation in modern mixed signal chip systems. The proposed circuit generates the spread spectrum clock by directly injecting the modulation voltage into the voltage-controlled oscillator (VCO) current source for SATA II. The resulting 33KHz modulation profile has a Hersey-Kiss shape with a rounded peak. The chip has been fabricated using $0.18{\mu}m$ CMOS process and test results show that the proposed circuit achieves 0.509% (5090ppm) down spreading at 1.5GHz and peak power reduction of 10dB. The active chip area is 0.36mm ${\times}$ 0.49mm and the chip consumes 30mW power at 1.5GHz.

성능시험 결과를 이용한 D발전소의 $CO_2$ 대기배출량 계산 ($CO_2$ Emission Calculation of D Thermal Power Plant using Performance Test Results)

  • 문홍규;이상중
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 추계학술대회 논문집
    • /
    • pp.341-344
    • /
    • 2007
  • 교토의정서(Kyoto Protocol)는 1997년 일본 교토에서 채택되어 2005년 2월에 공식 발효되었다. 우리나라는 현재 온실가스 감축의무 부담이 없지만 2013년부터 감축의무가 거의 확실시되고 있는 상황이다 국내 온실가스 배출량의 25%를 차지하는 발전산업은 화석연료를 사용하고 있어 전력생산에 따른 $CO_2$ 배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 - D발전소의 성능시험에 대하여 기술하고, - 성능시험 결과 얻어진 D발전소 성능시험 Data a, b, c 특성계수를 이용, LNG와 중유 연소시 각각 연료소모량에 대한 $CO_2$ 대기 배출량을 계산 비교하였으며, - 화학적인 방법에 의한 $CO_2$ 대기 배출량 산정방법을 간략히 언급하였다.

  • PDF

차세대 LNG선 컴프레서룸의 위험성 해석 (Risk Assessment of Compressor Room for Next Generation LNG Carriers)

  • 문기호;송석용;정삼헌;하종필
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2008년도 특별논문집
    • /
    • pp.76-83
    • /
    • 2008
  • New and more efficient propulsion systems are required for LNG carriers. One of the proposed systems is a combination of a gas turbine with a heat recovery steam generator. This system constitutes a novel approach, which needs to be analyzed by system analysis and risk assessment to compensate for the lack of field experience. Of specific concern is the high pressure fuel supply system. This paper describes the dispersion and fire analysis performed to identify for safety and design improvement of proposed system.

  • PDF

Development of a 300W Generator for Lightweight Wind Turbine

  • Lee, Hee-Kune;Lee, Hee-Joon;Kim, Sun-Hyung
    • 한국정보기술학회논문지
    • /
    • 제15권12호
    • /
    • pp.181-188
    • /
    • 2017
  • 레저 활동 인구의 증가와 다양화로 이동용 전력 시스템에 대한 수요가 많고 친환경적인 전력 발전 시스템에 대한 요구가 늘어나고 있으며 이를 충족 시킬만한 발전 장비로 소형 풍력 발전시스템이 대안으로 떠오르고 있다. 이동용 소형 풍력발전기를 개발할 때 가장 중요한 사항으로는 발전기의 무게를 줄이고 효율을 증가시키는 것이다. 기존의 300W급 풍력 발전기의 무게는 10kg정도로 이를 4kg이하로 줄여서 휴대가 용이하게 하면서 고 효율의 풍력 발전기용 발전기를 설계 제작하였다. 또한, 돌풍이 발생하는 한국의 풍량과 지형의 특성상 미풍에서도 발전이 가능하고 도심 및 농어촌 등에서도 독립적으로 사용할 수 있는 소형 풍력발전기를 설계 제작하였다. 기초설계 및 최적화설계를 통해 가볍고 효율이 높은 발전기를 제작하였다. 본 논문에서는 중량을 줄인 300W급 풍력발전기를 설계하고 시제품으로 제작 하였다. 제작한 300W 풍력발전기는 무부하 시험 시 정격속도 900rpm에서 평균출력전압이 24.7V이었으며, 제작된 발전기의 부하시험시 평균 선간전압 : 36.8V, 평균 상전류 : 2.62A로 기계적 입력이 339.84W일 때 출력전력은 289.5W로 측정되었고 이때의 효율은 85.18%이었다. 제작된 발전기 무게는 3.84kg이었다.