• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.205-210
• /
• 2015

In this paper, microalgae lipid extractions were performed using conventional organic solvent and supercritical carbon dioxide (SC-$CO_2$) for biodiesel-convertible lipid fractions. The highest levels (58.31%) of fatty acid methyl ester (FAME) content in the lipid extracted by SC-$CO_2$ was obtained, and 18.0 wt.% crude lipid yield was achieved for Bligh-Dyer method. In the SC-$CO_2$ extraction, methanol as a co-solvent was applied to increase the polarity of extract. The experimental results indicated that crude lipid yield, FAME content and yield extracted by combination of SC-$CO_2$ with methanol were 12.5 wt.%, 56.32% and 7.04 wt.%, respectively, and this method could reduce the extraction time from 2 hour to 30 min when compared to SC-$CO_2$ extraction. Therefore, SC-$CO_2$ extraction is proven to be an environmentally-friendly and an effective method for lipid extraction from microalgae.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.36-41
• /
• 1998

In this study, the extraction of Co(Ⅱ) and Cu(Ⅱ) into chloroform solution of dithizone, distribution ratios, extractabilities and extraction rate constants of the metal complexes were compared in each case with which thiocyanate ion was or not used as the auxiliary ligand. The use of the thiocyanate ion increased threefold the distribution ratio for Co(Ⅱ) complex in a basic solution and twofold for Cu(Ⅱ) complex in a wide pH range. And the extractability was also augmented from about 90 to 99 for Co(Ⅱ) and from 95 to 99 for Cu(Ⅱ) in a given period. The extraction rate constants were $k_1\;:\;1.2{\times}10^5$, $k_2\;:\;1.34{\times}10^{17}\; mol^{-1}dm^3s^{-1}$ in case of Co(Ⅱ) and$k_1\;:\;1.1{\times}10^8$, $k_2\;:\;2.83{\times}10^{10}\; mol^{-1}dm^3s^{-1}$ in case of Cu(Ⅱ) on the extraction of dithizonate complexes into chloroform solution.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.177-183
• /
• 2000

A supercritical fluid extraction was performed for the extraction of phenolics from grape seeds which up to now have been discarded. The optimum condition for extraction process was predicted through response surface methodology using central composit experimental design. The extraction amount of grape seed phenolics was increased by increasing extraction temperature, pressure, and concentration of co-solvent (ethanol). The optimum extraction conditions were 84.83$^{\circ}$C, 51.50MPa and 1.27% ethanol. The yield of phenolics using SFE was higher with 3 folds than ethanol and 4 folds than hexane but less than 80% methanol. In the respects of food poisoning, the approved solvents were restricted to ethanol and hexane. So, SFE for extraction of phenolics could be powerful alternative method for solvent extraction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.99-106
• /
• 2008

Metal ions such as Cu and Cr were extracted from the Cu, Cr and Ag impregnated active carbon by contacting the solid surfaces with supercritical carbon dioxide(Sc-$CO_2$) containing chelating agents. About 10g of the active carbon sample were loaded in a vertical tube extractor contacting with $CO_2$ flowing from the bottom of the tube for 6hrs. The ligands used were acetyl acetone(AA) and Cyanex-302(C-302). Water and methanol were used as entrainers to study the effect of co-solvent to $CO_2$. Experimental results showed that C-302 was more effective than AA in removing Cu with the maximum extraction of 42.0wt%, while 57.6wt% of Cr was extracted with AA from the sample.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.423-427
• /
• 2005

The bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex-272) and sodium diethyl- dithiocarbamate (NaDDC) ligands were used to extract of metal ions ($Cd^{2+},\;Co^{2+},\;Cu^{2+},\;Pb^{2+},\;Zn^{2+}$) in supercritical $CO_2$. Experiments showed a strong synergistic effect and better extraction efficiency if the two ligands were used together. In-situ UV-visible observation indicates that NaDDC in the water/supercritical $CO_2$ started to decompose slowly. The synergistic effect seems to come from the deprotonation of the organophosphorus ligand by amines from the decomposed NaDDC. The enhancing role of amines was confirmed using the mixture of Cyanex-272 and diethylamine(DEA) in the metal extraction.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.660-667
• /
• 2016

Conventional decontamination methods utilize water-based systems, which generate high amounts of secondary wastes. Herein, we describe an environmentally benign decontamination method using liquid and supercritical $CO_2$. The use of $CO_2$ as a solvent affords effective waste reduction by its ability to be recycled, thereby leaving be hind only the contaminants upon its evaporation. In this study, a $CO_2$ solution process was assessed using t-salen(t-butylsalen), DC18C6 (dicyclohexano-18Crown6), 8-HQN(8-hydroxyquinoline), NEt4PFOSA(perfluoro-1-octanesulfonic acid tetra-ethyl ammonium salt), and NEt4PFOA(pentadecafluorooctanoic acid ammonium salt) to extract spiked radioactive contaminants(Nb,Zr,Co,Sr) from an inert sample matrix, namely filter paper. With the static extraction method, Sr was extracted with a maximum extraction rate of 97%, and Nb was extracted with a maximum extraction rate of 75%. Additionally, we were also able to extract Co and Zr with maximum extract ion ratesof 73% and 64%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.851-856
• /
• 1989

The physical properties of essential oil of nutmeg extracted in different methods (SDE, Solvent, $CO_2$) were investigated and also the components of essential oil were analyzed using G.C. and G.C./ Mass. Solvent extraction yield was 23% and was higher than those of SDE extraction and $CO_2$ extraction. From the analysis result and physical properties of nutmeg oil, it was conformed that the nutmeg used In this experiment was similar to East Indies type. The content of sabinene was 3.6-14.1%, 28.4-48.7% for myristicin, 1.2-2.1% for elemicin, and 3.6-5.6% for safrole. The camphene was identified in SDE extracts but not in $CO_2$ extracts. The volatile components of SDE extracts and solvent extracts contained large amount of monoterpene and terpene alcohol but $CO_2$ extracts aminly contained aromatic compounds.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.307-316
• /
• 2016

Objectives: In general, NIOSH method 5506 is most widely used for the occupational exposure measurement of PAHs, but 2-4 ring PAHs have poor desorption efficiency, especially for a filter. The purpose of this study was to determine a method to increase the desorption efficiency of 16-PAHs using an ultrasonic extraction procedure. Methods: Test samples prepared spiked XAD-2 tubes and PTFE filters in the range of $0.01-1.0{\mu}g/mL$ for desorption efficiency study. Four different extraction solvents, acetonitrile, acetone, tetrahydrofuran and dichloromethane, were tested in order to select the most suitable solvent for the extraction of the 16 PAHs. The addition of dimethyl sulfoxide and sonication time were considered in order to determine the method with the highest extraction efficiency. All samples were made in three sets and analysis was replicated seven times by HPLC. Results: Acetonitrile and acetone were the optimized as an extraction solvent and desorption efficiency of 2-ring PAHs such as naphthalene, acenaphthylene were increased 3~19% with dimethyl sulfoxide for XAD-2. Acetone was the best extraction solvent for PTFE filter and the desorption efficiency was increased 3~13% for 2- to 4-ring PAHs. The optimum sonication time was 60 minutes and desorption efficiency increased with extraction time. Conclusions: As a result, the best extraction solvent was acetone with dimethyl sulfoxide for ultrasonic extraction procedure and the desorption efficiency of this method was better than NIOSH 5506's. This study could be applied as a method for occupational exposure measurement of PAHs.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.159-165
• /
• 2014

In this study, Krill Eupausia superba oil was extracted using different solvents and supercritical carbon dioxide (SC-$CO_2$). During SC-$CO_2$ extraction, the pressure was set at 40 MPa and temperatures ranged from $40^{\circ}C$ to $55^{\circ}C$. We examined the differences in volatile compounds and safety profiles among extraction methods. Volatile compounds were determined using the thermal desorption system integrated with gas chromatography-mass spectrometry (GC-MS). Heavy metal content was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). According to our results 10 volatile compounds were identified in krill sample. After SC-$CO_2$ extraction of oil, the concentrations of volatile compounds decreased, but increased after solvent extraction. In krill, heavy metal concentrations remained within the permissible limit. Moreover, Zn and Fe which have health benefits were detected at high concentrations. During a 90 days storage period at different temperatures, microbial activity was found to be lowest in SC-$CO_2$ extracted residues. Thus, the quality of krill oil and the residues obtained using SC-$CO_2$ extraction was higher and the oil was safer than those obtained using conventional solvent extraction. These results can be applied to the food industry to maintain high quality krill products.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.29-34
• /
• 2010

Distribution diagram of $CoCl_2$ and $MnCl_2$ was obtained by analyzing ionic equilibria of the two metals in HCl solution. In the HCl concentration range of 4 and 10 M, most of cobalt exists as $CoCl_2$, whereas Mn exists $MnCl_{3}^-$ and $MnCl_2$. Extraction isotherm of Co(II) and Mn(II) was calculated by using the equilibrium constant for the solvent extraction of the two metals by Alamine336. Although the equilibrium constant for the solvent extraction of Mn was higher than that of Co, extraction isotherm indicated that cobalt could be extracted more efficiently than manganese at the same initial extraction conditions.