• 분석과학
• /
• 제22권4호
• /
• pp.307-312
• /
• 2009

수용액 중의 carbaryl을 형광분광법을 이용하여 정량하기 위한 분석방법에 대하여 연구하였다. 분석의 최적 조건을 구하기 위해서 들뜸 파장, 계면활성제의 농도, 보조계면활성제인 ethanol의 농도 및 방출 파장의 방출 세기에 대한 영향을 조사하였다. Carbaryl 용액에 계면활성제인 sodium dodecyl sulfate (SDS)을 첨가하였을 때 방출세기가 조금 증가하였으며 보조계면활성제인 ethanol을 첨가하였을 때 방출 세기가 현저히 증가함을 관찰하였다. 최적 분석 조건의 들뜸 파장, 계면활성제의 농도, 보조계면활성제인 ethanol의 농도 및 방출 파장은 각각 281 nm, $1.0{\times}10^{-2}mol/L$, 20% (v/v), 349 nm 이었다. 최적 분석조건에서 carbaryl의 검정곡선의 감응범위와 검출한계($3{\sigma}$)는 각각 $5{\times}10^{-7}$에서 $1.0{\times}10^{-4}mol/L$ 및 $1.1{\times}10^{-8}mol/L$이었다. 검정곡선에서 직선성이 성립하는 농도 범위에서 상관계수(S/N=3)는 0.9996이었다.

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.95-105
• /
• 2009

Land Use Changes (LUCs) have effects on greenhouse gas emissions and carbon stocks in soil and vegetation. Therefore, predictions for LUC are very important for achieving quantitative targets of $CO_2$ reduction rates. Some research exists on carbon fluxes and carbon cycles to estimate carbon stocks in terrestrial ecosystems in Korea. However, these researches have limitations in terms of helping us understand future potential reductions of $CO_2$ that reflect the influence of LUC. The aim of this study is to analyze the reduction levels of $CO_2$ emissions while considering LUC scenarios that effect carbon fluxes for LCS basic study in the year 2030. In this study, a common approach to model the effects of LUC on carbon stocks is the use of CA-Markov technical process with LUC patterns in the past. Potential reduction of $CO_2$ is calculated by change of land use that contains different soil organic carbon, each land use type, and biomass in vegetation. An IPCC analytical method of natural carbon sink and coefficient results from previous study in Korea is used as a calculation method for potential reduction of $CO_2$. As a result, 12,419 KtC will be reduced annually, which is 8.3% percent of 2005 $CO_2$ emissions in Korea. This will result in 3,226 hundred million won of economic efficiency. In conclusion, conservation of natural carbon sinks is necessary even if the amount of potential reduction change is little.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.94-100
• /
• 2022

Even in non-road UTV (Utility Terrain Vehicle), spark ignition engines are often used to reduce emissions. In this study, gasoline and LPG (Liquified Petroleum Gas) fuels were applied to UTV engines, and the exhaust gas and combustion stability were compared through engine tests. A 0.8-liter two-cylinder SI engine was used in the experiment. Experiments were conducted while changing the IVO (Intake Valve Open) and EVC (Exhaust Valve Close) at 1500 rpm 14 N·m, 40 N·m, and 3000 rpm 17 N·m, 44 N·m conditions. As a result of the experiment, when the valve overlap increased according to the change of IVO and EVC, combustion stability decreased and THC emission increased, but NOx decreased. Comparing the LPG engine with the gasoline engine, the amount of CO₂ and PN (Particulate Number) generation decreased in the LPG engine, and the combustion stability was good.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.763-771
• /
• 2014

최근 국내에서는 원유 정제과정에서 많은 양의 부생황이 발생하고 있다. 유황콘크리트는 시멘트 풀을 유황개질 바인더로 대체한 콘크리트로서 시멘트 제조시에 대량으로 발생되는 $CO_2$의 저감 및 원유 정제산업에서 부생되는 황을 활용할 수 있는 이점이 있다. 또한 유황콘크리트는 반복해서 재활용할 수 있는 친환경적이고 지속가능한 재료이다. 이 연구에서는 개질유황 바인더를 사용한 유황콘크리트의 물리적 특성을 실험을 통하여 검토하였다. 실험 결과, 유황콘크리트는 대체적으로 50~80MPa 이상의 고강도 특성을 보였다. 단위질량, 탄성계수 및 인장강도는 포틀랜드 시멘트 콘크리트(PCC)와 유사하였다. 순환굵은골재를 유황콘크리트에 적용하는 경우 순환골재의 단점을 보완하는 동시에 고강도콘크리트 제조가 가능하다. 유황콘크리트의 열팽창계수는 PCC보다 다소 큰 값으로 나타내고 있으나, 채움재를 혼입하여 일반 콘크리트 수준의 열팽창계수를 보이는 것으로 나타났다.

• 한국인공지능학회지
• /
• 제8권2호
• /
• pp.17-22
• /
• 2020

Purpose: After entering the 21st century, a new industrial revolution, i.e. industrial revolution 4.0, which is characterized by intelligence, automation and networking, has opened the curtain of the "industry 4.0" era. In recent years, "low-carbon economy" has been a development goal that has been paid close attention to and adhered to at home and abroad. As a major economic province, Shandong Province has not only brought about rapid economic growth, but also caused rapid environmental deterioration due to its high energy consumption, high dependence and high environmental pollution. In this environment, low-carbon economy has become an inevitable trend in the development of foreign trade in Shandong Province. Based on the current situation of foreign trade in Shandong Province and various existing problems, this paper explores the relationship between low-carbon economy and foreign trade in Shandong Province under this strategic background. Research design, data and methodology: By selecting the data from 2008 to 2017, using the carbon emission coefficient method to measure the CO2 emissions in the past decade, analyzing the impact of ecological factors on trade, selecting the most representative GDP and total imports for regression analysis, it is proved that they have a real impact on CO2 emissions. The total GDP is positively correlated with carbon emissions, while the total import is negatively correlated with carbon emissions. Results:This paper discusses the impact of low-carbon economy on foreign trade of Shandong Province from the perspective of foreign trade. Especially in today's "low-carbon economy" background. Conclusions:it is helpful for relevant departments to formulate relevant policies and promote the sustainable development of foreign trade in Shandong Province.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.957-962
• /
• 2018

The gamma radiation shielding capability (GRSC) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated by determine theoretically and experimentally the mass attenuation coefficient, ${\mu}/{\rho}(cm^2g^{-1})$ of the clay materials at photon energies of 609.31, 1120.29, 1173.20, 1238.11, 1332.50 and 1764.49 keV emitted from $^{214}Bi$ ore and $^{60}Co$ point source. The mass attenuation coefficients were theoretically evaluated using the elemental compositions of the clay-materials obtained by Particle-Induced X-ray Emission (PIXE) elemental analysis technique as input data for WinXCom software. While gamma ray transmission experiment using Hyper Pure Germanium (HPGe) spectrometer detector to experimentally determine the mass attenuation coefficients, ${\mu}/{\rho}(cm^2g^{-1})$ of the samples. The experimental results are in good agreement with the theoretical calculations of WinXCom software. Linear attenuation coefficient (${\mu}$), half value layer (HVL) and mean free path (MFP) were also evaluated using the obtained ${\mu}/{\rho}$ values for the investigated samples. The GRSC of the selected clay-materials have been compared with other studied shielding materials. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their GRSC.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.137-149
• /
• 2019

Traffic emissions are the main cause of environmental pollution in cities and respiratory problems amongst people. This study developed a model based on an integration of support vector regression (SVR) algorithm and geographic information system (GIS) to map traffic carbon monoxide (CO) concentrations and produce prediction maps from micro level to macro level at a particular time gap in a day in a very densely populated area (Utara-Selatan Expressway-NKVE, Kuala Lumpur, Malaysia). The proposed model comprised two models: the first model was implemented to estimate traffic CO concentrations using the SVR model, and the second model was applied to create prediction maps at different times a day using the GIS approach. The parameters for analysis were collected from field survey and remote sensing data sources such as very-high-resolution aerial photos and light detection and ranging point clouds. The correlation coefficient was 0.97, the mean absolute error was 1.401 ppm and the root mean square error was 2.45 ppm. The proposed models can be effectively implemented as decision-making tools to find a suitable solution for mitigating traffic jams near tollgates, highways and road networks.

• 대기
• /
• 제31권5호
• /
• pp.625-635
• /
• 2021

South Korea established the 2050 Carbon Neutral Plan in response to the climate crisis, and to achieve this policy, it is very important to monitor domestic carbon emissions and atmospheric carbon concentration. Both CO₂ and CO are emitted from fossil fuel combustion processes, but the relative ratios depend on the combustion efficiency and the strength of local emission regulations. In this study, the relationship between CO₂ and CO was analyzed using ground observation data for the period of 2018~2020 at Anmyeon-do site and the CO/CO₂ ratio according to regional origin during high CO₂ cases was investigated based on the footprint simulated from Stochastic Time-Inverted Lagrangian Transport (STILT) model. CO₂ and CO showed a positive correlation with correlation coefficient of 0.66 (p < 0.01), and averaged footprints during high CO₂ cases confirmed that air particles mainly originated from eastern and north-eastern China, and inland of Korean Peninsula. In addition, it was revealed that among the cases of high CO₂ concentration, when the CO/CO₂ ratio is high, the industrial area of eastern China is greatly affected, and when the ratio is low, the contribution of the domestic region is relatively high. The ratio of CO₂ and CO in this study is significant in that it can be used as a useful factor in determining the possibility of domestic and foreign origins of climate pollutants.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.433-433
• /
• 2012

As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.162-172
• /
• 1998

A numerical study of premixed combustion within a porous ceramic burner (PCB) is performed to understand flame behavior with respect to various model parameters. Basic flame structure within the porous ceramic burner and species profiles such as NO and CO are examined. Sensitivity analysis of flame speed, gas and solid temperature, NO and CO emission from the burner with respect to reaction steps and various physical properties of the ceramic material is applied to find the most significant parameters in selection of porous materials for the porous ceramic burner. Effects of thermal conductivity, extinction coefficient and scattering albedo on the burner characteristics are studied through the sensitivity analysis. The results of sensitivity study reveal the order of importance in ceramic material properties to get suitable burner performance. Scattering albedo, which governs the ratio of absorbed energy by the ceramic material to total radiative energy transferred, is one of the most important parameters in the material properties since it affects the actual absorbed radiation rate and thus it largely affects the flame structure. Through the study, it is found that the sensitivity study can be used to estimate the flame behavior within the porous ceramic burner more effectively.