• 제목/요약/키워드: $CO_2$ corrosion

검색결과 466건 처리시간 0.031초

Dual Fuel 엔진용 이중관 벨로우즈 제작 공정의 최적화에 관한 연구 II - 용접공정의 최적화 - (A study on the optimization of manufacturing processes of double wall bellows for dual fuel engine II - Optimization of welding process -)

  • 김평수;김종도;송무근
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권6호
    • /
    • pp.504-509
    • /
    • 2016
  • 이중관 벨로우즈는 우수한 성형성과 내식성을 고려하여 오스테나이트계 스테인리스강인 STS 316L 소재를 사용하여 2겹으로 내부 및 외부 벨로우즈를 각각 제작한 후 다양한 조건과 용접 방법을 적용하여 이중관 벨로우즈를 제작한다. 하지만 제품의 성형 또는 사용시 균열이나 파단에 가장 취약한 부분이 용접부이기 때문에 제품의 신뢰성을 획득하기 위하여 각각의 용접부에 대한 미세조직을 관찰하여 결함 발생 여부를 측정해야 한다. 본 연구에서는 다양한 용접 공정을 거쳐 제작된 벨로우즈의 용접부를 검사하고 미세조직을 분석하여 최적의 용접 조건을 도출하였다. 또한 용접부의 경도 측정을 통해 모재와 용접부 그리고 열영향부 등 용접영역의 기계적 특성을 평가하였다.

순티타늄판의 Nd:YAG 레이저 용접성에 관한 연구(IV) - 겹치기 용접 및 실물 열교환기로의 적용 - (A Study of Weldability for Pure Titanium by Nd:YAG Laser(IV) - Lap Welding and Application for Heat Exchanger -)

  • 김종도;곽명섭;이창제;길병래
    • Journal of Welding and Joining
    • /
    • 제28권1호
    • /
    • pp.66-71
    • /
    • 2010
  • With large specific strength and outstanding corrosion resistance and erosion resistance in sea water, titanium and titanium alloy are widely used in heat exchanger production. In particular, pure titanium demonstrates outstanding molding performance and may be considered optimal for production of heat exchanger. Since titanium is very vulnerable to oxidation and embrittlement during welding, processes with less heat input are widely used, and laser welding is widely applied by considering production performance and shield etc in atmosphere. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through oxygen and nitrogen quantitative analysis and hardness measurement, and evaluated welding performance and mechanical properties of butt welding. This study evaluated field applicability of lap welding to heat exchange plate of LPG re-liquefaction device for ships through tensile stress test, hardness test and internal pressure test etc after deducing optimal weding condition and applying to actual heat exchange plate. In bead overlap area, the experiment produced sound welds with no porosity or defect by increasing and decreasing laser power, and tensile-shear test results indicated virtually the same tension and yield strength as base metal. As a result of measuring hardness at lateral cross section and bead overlap zone of actual heat exchanger welds, hardness difference within 20Hv was produced at base metal, HAZ and weldment, and as a result of pneumatic and hydraulic pressure test, no leakage occurred.

공동현상을 고려한 커먼레일용 고압 DME 인젝터 노즐의 최적 설계 연구 (Study on the Optimum Design of High Pressure Common-rail DME Injector Nozzle with Consideration of Cavitation)

  • 정수진;박정권;이상인
    • 한국자동차공학회논문집
    • /
    • 제21권1호
    • /
    • pp.99-106
    • /
    • 2013
  • DME (Di-Methyl Ether) is synthetic product that is produced through dehydration of methanol or a direct synthesis from syngas. And it is able to save fossil fuel and reduce pollutants of emission such as PM and $CO_2$. In spite of its advantages it is difficult to design DME fuelled engine system because DME fuel may cause to severely generate cavitation and corrosion in fuel delivery system due to physical properties of DME. Therefore, in this study three-dimensional internal flow characteristics with consideration of cavitation were predicted in the DME injector using diesel and DME fuel. Moving grid technique was employed to describe needle motion and 1-D hydraulic simulation of injector was also simulated to obtain transient needle motion profiles. The results of simulation show that cavitations was generated at the inlet of nozzle near high velocity region both diesel and DME. And mass flow rate of DME is reduced by 4.73% compared to that of diesel at maximum valve lift because cavitation region of DME is much more larger. To increase flow rate of DME injector, internal flow simulation has been conducted to investigate the nozzle hole inner R-cut effect. The flow rates of diesel and DME increase as R-cut increases, and flow coefficient of DME fuel injector was increased by 6.3% on average compared with diesel fuelled injector. Finally, optimum shape of DME injector nozzle is suggested through the comparison of flow coefficient with variation of nozzle hole inner R-cut.

초합금 단결정 주조용 주형의 실리카 함량에 따른 고온강도 영향 (The Influence of the Silica Contents for High Temperature Strength for Single Crystal Casting Mold of Superalloys)

  • 안성욱;;;임옥동;진영훈;서동이;이재훈;김병호;오제명
    • 한국재료학회지
    • /
    • 제8권10호
    • /
    • pp.879-883
    • /
    • 1998
  • 초합금의 진공정밀주조시에 진공하에서 용해한 합금을 $1000~1700^{\circ}C$로 가열한 세라믹 주형에 주입하고 난 후, 용탕이 장시간 주형안에 노출됨으로써, 주형의 고온강도가 높아야 하므로 고품위의 주형재를 사용하여 왔으나, 저품위의 값싼 소재를 사용하여 고품위의 주형과 동등한 효과를 갖게 하고자 주형내의 Silica 함량을 조절하였다. 그 결과 SiO2 첨가량이 7.7wt.%일 때, 다른 시험편에 비해 소성강도와 고온강도가 10-55%가량 증가 하였다. 따라서 일반적으로 정밀주조 주형으로 사용하는 용융알루미나와 colloidal silica의 혼합비를 제어하여 단결절 주조용 주형을 개발하였다.

  • PDF

아말감과 이종(異種)금속의 거리에 따른 부식에 대한 고찰 (A Study on Corrosion according to Distance between Amalgam and Dissimilar Metals)

  • 김주원;정은경
    • 치위생과학회지
    • /
    • 제4권3호
    • /
    • pp.103-109
    • /
    • 2004
  • 본 실험은 제조회사 매뉴얼과 통법에 의해서 Amalgam 합금, Ni-Cr alloy의 Crown용 Verabond, Denture용 Talladium $^{TM}alloy$로 각각 24개의 총 72의 시편을 하악 제1대구치근 원심 치관 폭경과 임상에서의 MOD cavity를 고려하여 제작하였고 인공 타액 80ml를 담은 200ml 용 비이커에 시편을 넣어 0mm, 7mm, 40mm 거리에서 7일 후 갈바닉 부식을 측정하였다. 유리금속은 유도 플라즈마 방출 분광기(Inductively Coupled Plasma - Atomic Emission Spectrometer(ICP-AES, JY-50P, VG Elemental Co. France)로 전해액내의 Cu, Ag, Ni, Cr, Sn, Zn, Hg를 정량 분석했으며 그 결과 다음과 같은 결론을 얻었다. 첫째, Cu, Sn, Ag, Hg, Zn은 아말감이 금 합금과 접촉했을 때가 크라운용 Ni-Cr alloy와 덴쳐용 Talladium alloy 보다 아주 많이 유리 했으며 금 합금이 구강조직과 생체 적합성이 가장 좋다지만 아말감과 함께 있을 때 가장 불리 했슴을 알 수 있었다. 둘째, 아말감이 금 합금과 접촉했을 때, 금 합금의 조성에서 Ni, Cr 같은 중금속이 함유되지 않았기 때문인지 전혀 유리되지 않았으나 Sn은 조성에는 없었지만 $227.1{\pm}18.0035{\mu}g/cm^2$나 유리 되었고 Hg도 유리되었는데 이는 아말감 자체의 유리 물질임을 추측할 수 있었다. 셋째, 아말감 합금과 금 합금 사이에서의 0mm, 7mm, 40mm 거리에서는 Cu, Ag는 유의성이 있었으며 Hg는 유의성이 없었다. 이는 금합금은 절대 아말감과 같이 사용해서 안되며 이종 보철물 사이의 거리에 관계없이 사용을 금해야 하는 것으로 사료된다. 넷째, 아말감합금이 Crown용 Ni-Cr 합금과 접촉했을 때 아말감의 Ag이 유리 되지 않았으며 Zn, Ni, Sn, Hg, Cu의 순으로 유리되었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 다섯째, 아말감합금이 Denture용 Talladium alloy 합금과 접촉했을 때 0mm, 7mm, 40mm 거리에서도 유의성이 있었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 여섯째, 인공 타액에서 접촉 시 Amalgam alloy와 Gold, Verabond, Talladium alloy의 Cu, Sn, Ag, Hg, Zn, Ni, Cr의 ICPES 검사 결과 Cu, Hg가 유의성을 있었다. 일곱째, 인공타액에서 아말감합금과 두 비귀금속인 Ni-Cr alloy(crown용), Denture용 Talladium alloy가 접촉한 경우 거리에 따른 Hg, Ni, Cr의 유리 부산물에서 유의성을 확인했다.

  • PDF

ATO 처리후, 플라즈마 전해 산화 처리된 Ti-6Al-4V 합금의 표면 형태 (Surface Morphology of PEO-treated Ti-6Al-4V Alloy after Anodic Titanium Oxide Treatment)

  • Kim, Seung-Pyo;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.75-75
    • /
    • 2018
  • Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

  • PDF

초고속 용사 적용 고속 초고압 왕복동 펌프 플런저의 내구성 특성에 관한 연구 (A Study on Characteristics of Durability for Plunger of High Speed and Ultra-High Pressure Reciprocating Pump Using High Velocity Oxygen Fuel Spraying)

  • 배명환;박병호;정화;박희성
    • 한국자동차공학회논문집
    • /
    • 제22권5호
    • /
    • pp.20-28
    • /
    • 2014
  • The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

PWR 발전소에서의 방사선장 특성 (Radiation Field in PWR Plants)

  • 송명재;김희근;김봉환;장시영
    • Journal of Radiation Protection and Research
    • /
    • 제17권2호
    • /
    • pp.61-70
    • /
    • 1992
  • 국내 원전의 주종인 가압경수로를 대상으로 스펙트로메트리 기법에 의한 감마, 중성자 그리고 베타 방사선장에 대한 특성조사를 수행하였다. 감마선장의 경우, HPGe 반도체 검출기로 구성된 휴대용 감마 스펙트로메타를 사용하여 측정한 결과, 평균 에너지 값의 분포는 가동정지중일 때 원전의 격납용기내에서 $440{\sim}780keV$, 가동중일 때 원전의 보조건물내에서 $280{\sim}760 keV$로 나타났다. 가동중인 원전의 격납용기내 operation deck를 중심으로 5개 지점에 대하여 BMSS (Bonner Multiple Spectrometry System)을 사용하여 중성자선장을 조사하였다. BUNKI 코드를 사용하여 측정스펙트럼을 분해하였으며, 측정 장소에서의 평균 에너지 값의 분포는 $20{\sim}210 keV$이었다. 베타피폭원인 오염에 대하여 가동정지 상태인 원전의 격납용기내와 보조건물의 총 14개 지점의 고방사성 오염지역에서 smearing 시료를 채취하여 표면장벽형 Si 반도체검출기를 사용하여 에너지 스펙트럼을 측정하였다. 그 결과 부식생성물 $^{60}Co$에 의한 베타 에너지가 지배적인 것으로 나타났다.

  • PDF

CFD를 활용한 크래프트 회수보일러 내부 노즈 아치 구조에 따른 열교환 효율 분석 (Analysis on the Heat Exchange Efficiency of Kraft Recovery Boiler by Nose Arch Structure Using CFD)

  • 장용호;박현도;임경필;박한신;김정환;조형태
    • 공업화학
    • /
    • 제32권2호
    • /
    • pp.149-156
    • /
    • 2021
  • 크래프트 회수보일러(kraft recovery boiler)는 펄프 공정에서 생성된 흑액을 연소하여 발전용 스팀을 생산하는 장치이다. 특히 연소로 상단부에 존재하는 과열기(superheater)는 포화 증기가 연소가스와 열교환을 통해 과열 증기로 전환되는 구간으로, 연소가스와 포화 증기 사이의 열교환 효율 향상은 발전용 과열 증기 생산량 증가 및 발전 효율이 증가하므로 매우 중요하다. 과열기 하단부에 위치한 노즈 아치는 과열기의 부식의 원인이 되는 연소로에서 발생한 복사열을 막는 중요한 역할을 하지만, 연소가스 유동을 방해하여 포화증기와 열교환이 끝난 저온의 연소가스가 과열기를 나가지 못하고 재순환되어 열교환 효율을 저하시키는 직접적인 원인이 된다. 따라서 본 연구에서는 CFD를 활용하여 노즈아치 구조에 따른 재순환 영역의 크기와 연소가스 출구 온도를 비교하였다. 결과적으로 노즈 아치 하단부 각도를 106.5°에서 150°로 변경할 경우 연소가스의 재순환 영역이 감소하여 연소가스와 과열기 사이의 열교환 효율이 10.3% 향상되는 것을 확인하였다.

반 건조 하수슬러지와 폐플라스틱 혼합물의 파일롯 규모 연속식 열분해에 의한 생산물과 발생 오염물질 (Products and pollutants of half dried sewage sludge and waste plastic co-pyrolysis in a pilot-scale continuous reactor)

  • 김용화;천승규
    • 한국응용과학기술학회지
    • /
    • 제34권2호
    • /
    • pp.327-337
    • /
    • 2017
  • 반 건조 소화 하수슬러지와 폐플라스틱을 혼합하여 파일롯 규모(85.3kg/hr)의 연속식 저온($510^{\circ}C{\sim}530^{\circ}C$) 열분해 실험을 하였다. 실험결과 열분해가스 발생량은 투입물 건량의 최대 68.3%, 발열량은 $40.9MJ/Nm^3$이었으며, 연속식 열분해에 따른 외기 유입율이 19.6%이었다. 오일은 투입물 건량의 4.2%가 발생하였고, 저위발열량은 32.5 MJ/kg이었으며 시설부식 등을 일으킬 수 있는 황과 염소의 함량이 각각 0.2% 이상이었다. 투입물 건량의 27.5%가 발생한 탄화물의 저위 발열량은 10.2 MJ/kg이었고, 용출시험 결과 지정폐기물에 해당하지 않았다. 열분해가스의 연소 배가스는 일산화탄소, 황산화물, 시안화수소 등의 배출농도가 특히 높았고, 다이옥신 (PCDDs/DFs)은 $0.034ng-TEQ/Sm^3$로서 법적 기준치 이내였다. 건조 배가스 응축으로 발생한 폐수는 수질오염물질 47개 항목 중 총질소, n-H 추출물질, 시안 등의 고농도 항목이 많아 전처리 후 하수처리장 등에서의 병합처리 방식을 고려할 필요가 있었다.