Browse > Article
http://dx.doi.org/10.5916/jkosme.2016.40.6.504

A study on the optimization of manufacturing processes of double wall bellows for dual fuel engine II - Optimization of welding process -  

Kim, Pyung-Su (Hanjo Co., Ltd, Engineering Center)
Kim, Jong-Do (Division of Marine Engineering, Korea Maritime and Ocean University)
Song, Moo-Keun (Graduate school, Korea Maritime and Ocean University)
Abstract
Production processes of double wall bellows can be roughly categorized into two steps. In the first step, inner and outer bellows are made of STS316L in austenite stainless steel due to their excellent formability and corrosion resistance. In the second step, the double wall bellows are manufactured using the welding method with both the inner and outer bellows. The microstructure and defects of each weldment are observed to ensure the reliability of bellows since weldment is a highly vulnerable part, which can crack and fracture when bellows are formed or used. In this study, optimum welding conditions were derived from the analysis of microstructure and inspection of weldment of bellows that were produced using various welding procedure. Moreover, the mechanical properties were evaluated through hardness measurement of substrate, weldment and the heat-affected zone.
Keywords
Double wall bellows; Weldment; Microstructure; Mechanical properties;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 P. S. Kim, H. Y. Choi, S. Y. Choi, Y. S. Kim, and J. D. Kim, "Fundamental study on the weldability and formability of INCOLOY 825 alloys and STS316L alloys," Journal of the Korean Society of Marine Engineering, vol. 38, no. 6, pp. 698-703, 2014 (in Korean).   DOI
2 Y. S. Kim and S. C. Kil, "Latest welding technology for storage and transportation facilities of liquified natural gas," Journal of the Korean Society of Marine Engineering, vol. 40, no. 1, pp. 17-27, 2016 (in Korean).   DOI
3 J. D. Kim, C. J. Lee, and M. K. Song, "Characteristics of fiber laser welding on STS304L for GTT MARK III membrane," Journal of the Korean Society of Marine Engineering, vol. 36, no. 8, pp. 1069-1075, 2012 (in Korean).   DOI
4 Y. H. Moon and S. D. Huh, "The factors to form delta-ferrite in austenitic stainless steel weldment," The Korean Welding&Joining Society, vol. 5, no. 1, pp. 16-22, 1987 (in Korean).
5 H. W. Lee, Y. T. Shin, J. U. Park, J. W. Lee, and C. Y. Kang, "A study of low temperature strength and fatigue strength of austentic stainless steel for membrane type LNG tank," Journal of Korea Welding Society, vol. 17, no. 3, pp. 50-54, 1999 (in Korean).
6 E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. E. Murr, W. W. Fisher, and A. H. Advani, "Combined effects of deformation(Strain and strain state), grain size and carbon content on carbide precipitation and corrosion sensitization in 304 stainless steel," Materials Characterization, vol. 35, no. 2, pp. 99-112, 1995.   DOI
7 D. A. Butzea, H. J. Cordewiner, C. Stickelmann, H. P. Muller, and R. Hemminger, Manufacturing and Quality Test of the Metal Bellows of the TEXTOR Vacuum Vessel, Report No. JUEL-SPEZ-229, Zentralabteilung Allgemeine Technologie, Germany, 1983.
8 A. Laupa and N. A. Weil, "Analysis of U-Shaped Expansion Joint," Journal of Applied Mechanics, vol. 29, no. 1, pp. 115-123, 1962.   DOI
9 P. S. Korinko and S. H. Malene, "Considerations for the Weldability of Type 304L and 316L Stainless Steel," Practical Failure Analysis, vol. 1, no. 4, pp. 61-68, 2001.   DOI
10 B. S. Rho, H. U. Hong, and S. W. Nam, "The Effect of ${\delta}$-Ferrite on Fatigue Cracks in 304L Steel," International Journal of Fatigue, vol. 22, no. 8, pp. 683-690, 2000.   DOI