• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.69-77
• /
• 1993

Substrate removal efficiency of industrial wastewater from dye plant was investigated with fluidized-bed biofilm reactor(FBBR). Wastewater was diluted by 2, 3 and 6 times for experiment. When F/M ratio was increased 0.2 to 0.3, substrate removal efficiency of wastewater was rapidly decreased in all dilution ratio. Substrate removal efficiency was increased with dilution ratio in same F/M ratio, with hydraulic retention time. In case of 6 times diluted wastewater, below 0.2 F/M ratio, removal efficiency of BOD was $90{\sim}97%$. For reactor design, the parameters such as Y, $k_d$ and r was obtained as follows: $Y=0.3365\;k_d=0.03782\;day^{-1}\;r=0.997$ in 2 times diluted $Y=0.3341\;k_d=0.02750\;day^{-1}\;r=0.996$ in 3 times diluted $Y=0.3365\;k_d=0.03434\;day^{-1}\;r=0.998$ in 6 times diluted

• Biomolecules & Therapeutics
• /
• v.5 no.4
• /
• pp.344-350
• /
• 1997

The purpose of the present study was to produce and characterize a monoclonal antibody against human ${\beta}_2$-adrenergic receptor. Male BALB/c mice were immunized with glutathione S-transferase (GST) fusion protein of the C-terminal portion of the human ${\beta}_2$-adrenergic receptor which was expressed in E.Coli. The immunized splenocytes were fused with myeloma SP2/0-Agl4 cells. The resulting hybridomas were screened for the production of a monoclonal antibody which can recognize human ${\beta}_2$-adrenergic receptor, and then subcloned by limiting dilution. The resulting monoclonal antibody was named as mAb$\beta$CO2. The mono-clonal antibody $\beta$CO2 was determined as IgM subtype and then purified by anti-mouse IgM-agarose affinity chromatography. The results of ELISA, Western blot, and immunocytochemistry showed that mAb$\beta$CO2 recognized human ${\beta}_2$-adrenergic receptor in the ${\beta}_2$-adrenergic receptor-GST fusion protein and human spider-moid carcinoma cell line A431 with highly specific immunoreactivity, The monoclonal antibody $\beta$CO2 may provide useful tools for the study of the $\beta$-adrenergic receptor of human and other species including rats.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.9-15
• /
• 2012

The ignition characteristics in a confined axisymmetric coflow $CH_4$ jet were investigated numerically with the Fire Dynamics Simulator(FDS). The $CH_4$ fuel stream was diluted with main combustion product gases, such as $O_2$, $N_2$, CO, $CO_2$, and $H_2O$, and the mixed fuel stream was heated up to the sufficient temperature where a supplying fuel stream can be ignited. For the calculation of chemical reaction in the simulation, a 2-step global finite chemistry model was considered. Boundary condition for confined wall was optimized by investigating the effects of wall temperature on the ignition characteristics of fuel stream. In addition, the effects of composition of diluents in the fuel stream and fuel stream temperature on the ignition of fuel steam were investigated. The ignition characteristics of $CH_4$ stream with diluents were very sensitive to the wall temperature, composition of diluents in the fuel stream and fuel stream temperature.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.15-23
• /
• 1997

Gold mineralization of the Ogkye gold mine was deposited mainly in quartz veins up to 150 cm wide which occupy fissures in Cambrian Pungchon limestone. Ore minerals are relatively simple as follows: pyrite, arsenopyrite, pyrrhotite, sphalerite, electrum and galena. On the basis of the Ag/Au ratio on ore grades, mode of occurrence and assoicated mineral assemblages, the Ogkye gold deposit can be classified as pyrite-type gold deposit (Group IIB). Fluid inclusion data indicate that ore minerals were deposited between $400^{\circ}$and $230^{\circ}C$ from relatively dilute fluids (0.2 to 7.3 wt.% eq. NaCl) containing $CO_2$. The ore mineralization resulted from a complex history of $CO_2$ effervescence and local concomitant boiling coupled with cooling and dilution of ore fluids. Gold deposition was likely a result of decrease of sulfur activity caused by sulfide deposition and/or $H_2S$ loss accompanying fluid unmixing. Sulfur isotope compositions of sulfide minerals (${\delta}^{34}S=3.5{\sim}5.9$‰) are consistent with ${\delta}^{34}S_{H_2S}$ value of 4.8 to 6.1‰, suggesting mainly an igneous source of sulfur partially mixed with wall-rock sulfur.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.67-83
• /
• 2012

In order to evaluate die geochemical characteristics of sediment in a semi-enclosed bay used as shellfish and fish farming area, the concentrations of metallic(V, Cr, Mn, Fe, Co. Ni, Cu, Zn, Ag, Cd, Hg, Ph, As) and non-metallic(P, Se) elements and uranium were measured in the surface sediment samples collected from 19 stations of Gamak Bay in April 2010. Metal contamination status in the sediments were also evaluated using the sediment quality guidelines(SQGs) proposed by the National Oceanic and Atmospheric Administration(NOAA) and the enrichment factor(EF). The concentrations of elements in sediment were mainly controlled by quartz-dilution effect(V, Cr, Fe, Co and Ni), the dilution effect of organic matter(Cd and U), and metal redistribution by the decomposition of organic matter(Mn, Ag, As, and Se). The concentrations of metals, except As and Ni, in sediments from all sampling stations were lower than ERL values of NOAA. Conclusively, the surface sediment of Gamak Bay was slightly polluted with Ni, Ag, Cd, and Cd but was not polluted with other elements on the basis of EF results. Our results suggest that the surface sediment in Gamak Bay is not polluted by metallic elements.

• Journal of Welding and Joining
• /
• v.25 no.1
• /
• pp.30-36
• /
• 2007

A joining of dissimilar metal combination faces significant problems such as poor strength and cracking associated with brittle intermetallic compounds(IMC) formed. An application of laser allows low heat input; leading to less dilution and smaller heat affected zone. The $CO_2$ laser overlay was conducted on an AC2B alloy with feeding Fe-based powders. The overlay area was significantly influenced from the travel velocity rather than the powder feeding rate. The interface between the overlay and substrate consisted of the hard and brittle IMC($FeAl_3,\;Fe_3Al,\;Fe_2Al_5$), which initiating and propagating the crack. The reciprocating test for the slide wear was conducted on a multi-pass overlay experiment. Comparing with the multi-pass overlay with no overlap, the overlay with 50% overlap showed better wear resistance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.16.1-16.1
• /
• 2011

Gas sensor properties of $WO_3$ nanowire structures have been studied. The sensing layer was prepared by deposition of tungsten metal on porous single wall carbon nanotubes followed by thermal oxidation. The morphology and crystalline quality of $WO_3$ material was investigated by SEM, TEM, XRD and Raman analysis. A highly porous $WO_3$ nanowire structure with a mean diameter of 82 nm was obtained. Response to CO, $NH_3$ and $H_2$ gases diluted in air were investigated in the temperature range of $100{\sim}340^{\circ}C$ The sensor exhibited low response to CO gas and quite high response to $NH_3$ and $H_2$ gases. The highest sensitivity was observed at $250^{\circ}C$ for $NH_3$ and $300^{\circ}C$ for $H_2$. The effect of the diameters of $WO_3$ nanowires on the sensor performance was also studied. The $WO_3$ nanowires sensor with diameter of 40 nm showed quite high sensitivity, fast response and recovery times to $H_2$ diluted in dry air. The sensitivity as a function of detecting gas concentrations and gas sensing mechanism was discussed. The effect of dilution carrier gases, dry air and nitrogen, was examined.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.1-6
• /
• 2021

Hydrogen is considered a cleaner energy source than fossil fuels. As a result, the use of hydrogen in daily life and economic industries is expected to increase. However, the use of hydrogen energy is currently limited because of safety issues. The rate of combustion of the hydrogen mixture is about seven times higher than that of hydrocarbon fuels. The hydrogen mixture is highly flammable and has a low minimum ignition energy. Therefore, it presents considerable risks for fire and explosions in all areas of hydrogen manufacturing, transportation, storage, and use. In this study, the auto-ignition characteristics of hydrogen were investigated numerically for diluted hydrogen mixtures. Auto-ignition temperature, a critical property predicting the fire and explosion risk in hydrogen combustion, was determined in well-stirred reactors. When N₂ and CO₂ were used to dilute the hydrogen/air mixture, the ignition delay time increased with increasing dilution ratios in both cases. The CO₂-diluted mixtures exhibited a longer ignition delay than the N₂-diluted mixtures. We also confirmed that lower initial ignition temperatures increased the ignition delay times at 950 K and above. Overall, the auto-ignition characteristics, such as the concentrations of participating species and ignition delay times, were primarily affected by the initial temperature of the mixture.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.197-197
• /
• 1996

Helicobacter pylori (H. pylori) is a microaerophilic spiral bacterium and infection by it in the human stomach causes gastritis, furthermore, it is considered to be involved in the pathogenesis of peptic ulcers and the development of gastric carcinoma. We assessed the inhibitory activity of new antiulcer drugs against Helicobacter pylori. The activities of new antiulcer agents against Helicobacter pylori strains were determined by the standard agar dilution method with blood agar base #2, supplemented with 5% sheep blood and 4 antibiotics to support growth of these organisms. They were inoculated by multipoint inoculator and incubated at 37$^{\circ}C$ for 3 days under microaerophilic atmosphere. The MIC of antiulcer agents was the lowest concentration that inhibited visible growth of these organisms. According to results of various biochemical tests, these bacteria were identified as Helicobacter pylori strains. And the MIC results showed that the strains were very susceptible to omeprazole and YJA20379s. Some of YJA20379s were more potent than omeprazole. These results suggest that our new antiulcer drugs have potent inhibitory activity against Helicobacter pylori, so that our new antiulcer drugs might be useful for the clinical eradication of gastrointestinal Helicobacter pylori.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.