• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.33-38
• /
• 2018

This study applied upgrades to the processes of a 10 MW wet amine $CO_2$ capture pilot plant and conducted performance evaluation. The 10 MW $CO_2$ Capture Pilot Plant is a facility that applies 1/50 of the combustion flue gas produced from a 500 MW coal-fired power plant, and is capable of capturing up to 200 tons of $CO_2$. This study aimed to quantitatively measure efficiency improvements of post-combustion $CO_2$ capture facilities resulting from process upgrades to propose reliable data for the first time in Korea. The key components of the process upgrades involve absorber intercooling, lean/rich amine exchanger efficiency improvements, reboiler steam TVR (Thermal Vapor Recompression), and lean amine MVR (Mechanical Vapor Recompression). The components were sequentially applied to test the energy reduction effect of each component. In addition, the performance evaluation was conducted with the absorber $CO_2$ removal efficiency maintained at the performance evaluation standard value proposed by the IEA-GHG ($CO_2$ removal rate: 90%). The absorbent used in the study was the highly efficient KoSol-5 that was developed by KEPCO (Korea Electric Power Corporation). From the performance evaluation results, it was found that the steam consumption (regeneration energy) for the regeneration of the absorbent decreased by $0.38GJ/tonCO_2$ after applying the process upgrades: from $2.93GJ/ton\;CO_2$ to $2.55GJ/tonCO_2$. This study confirmed the excellent performance of the post-combustion wet $CO_2$ capture process developed by KEPCO Research Institute (KEPRI) within KEPCO, and the process upgrades validated in this study are expected to substantially reduce $CO_2$ capture costs when applied in demonstration $CO_2$ capture plants.

• 한국해양공학회지
• /
• 제36권3호
• /
• pp.168-180
• /
• 2022

The IMO has decided to proceed with the early introduction of EEDI Phase 3, a CO₂ emission regulation to prevent global warming. Measures to reduce CO₂ emissions for ships that can be applied immediately are required to achieve CO₂ reduction. We set six different CO₂ emission scenarios according to the type of ship and fuel, and designed a monoethanolamine-based CO₂ capture process for ships using a rate-based model of Aspen Plus v10. The simulation model using Aspen Plus was validated using pilot plant operation data. A ship inevitably tilts during operation, and the performance of a tilted column decreases as its height increases. When configuring the conventional CO₂ capture process, we considered that the required column heights were so high that performance degradation was unavoidable when the process was implemented on a ship. We applied a parallel column concept to lower the column height and to enable easy installation and operation on a ship. Simulations of the parallel column confirmed that the required column height was lowered to less than 3 TEU (7.8 m).

• 에너지공학
• /
• 제28권4호
• /
• pp.13-18
• /
• 2019

The high energy penalty in amine-based post-combustion CO₂ capture process is hampering its industrial scale application. An advanced process is designed by intensive heat integration within the conventional process to reduce the stripper duty. The study presents the technical feasibility for stripper duty reduction by intensive heat integration in CO₂ capture process. A rigorous rate-based model has been used in Aspen Plus® to simulate conventional and advanced process for a 300 MW coal-based power plant. Several design and operational parameters like split ratio, stripper inter-heater location and flowrate were studied to find the optimum values. The results show that advanced configuration with heat integration can reduces the stripper heat by 14%.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.77-83
• /
• 2023

급격한 산업화에 따른 에너지 사용량의 증가로 대기 중 이산화탄소(CO₂)의 농도가 증가하여 기후변화가 가속화되고 있다. 여기에 대응하기 위해 에너지 패러다임 전환이 필요하고, 그 일환으로 수소(H₂)가 주목받고 있다. 하지만 현재 대부분(95%)의 수소가 화석연료 기반의 추출수소로 생성되며, 많은 양의 CO₂를 배출하고 있다. 이를 그레이수소라 하는데 여기에 CO₂포집·이용·저장(CCUS)기술을 적용하여 CO₂ 배출량을 줄이면 블루수소가 된다. 상용 CO₂ 포집기술로는 습식법, 건식법, 분리막법이 있는데 각자 장단점을 가지고 있어 배가스 특성분석이 선행되어야 한다. 수소생산기지에서 배출되는 CO₂는 수분제거 시 20%를 상회하고 배출량은 중소규모로 분류되어 습식법 보다 분리막법의 적용이 유리할 것으로 판단된다. 또한, LNG 냉열을 사용할 수 있다면 분리막의 포집성능(선택도)이 향상되어 효율적인 CO₂ 포집 공정 구현이 가능하다. 본 연구에서는 수소생산기지에서 배출되는 배가스를 분석하고 여기에 적합한 CO₂ 포집기술에 대한 논의가 이뤄질 것이다.

• 융복합기술연구소 논문집
• /
• 제12권1호
• /
• pp.19-23
• /
• 2022

Interest in hydrogen production to respond to climate change is increasing. Until now, hydrogen has been mainly produced through the SMR (Steam Methane Reforming) process using natural gas. A large amount of CO₂ is emitted in the hydrogen production process through SMR, and the gas flow including CO₂ generated in the SMR process has different characteristics for each emission source, so it is important to apply a suitable CO₂ capture process. In the case of PSA tail gas or synthesis gas, the applicability of an amine-based process has been confirmed or demonstrated close to a commercial level. However, in the case of the flue gas generated from the reformer, it is still difficult to apply the conventional amine-based process because the partial pressure of CO₂ is relatively low. Energy-saving innovative absorbents such as phase separation absorbents can be a solution to these difficulties.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.103-108
• /
• 2016

Carbon Capture and Storage technologies are recognized as key solution to meet greenhouse gas emission standards to avoid climate change. Although MEA (monoethanolamine) is an effective amine solvent in $CO_2$ capture process, the application is limited by high energy consumption, i.e., reduction of 10% of efficiency of coal-fired power plants. Therefore the development of new solvent and improvement of $CO_2$ capture process are positively necessary. In this study, improvement of $CO_2$ capture process was investigated and applied to Test Bed for reducing energy consumption. Previously reported technologies were examined and prospective methods were determined by simulation. Among the prospective methods, four applicable methods were selected for applying to 0.1 MW Test Bed, such as change of packing material in absorption column, installing the Intercooling System to absorption column, installing Rich Amine Heater and remodeling of Amines Heat Exchanger. After the improvement construction of 0.1 MW Test Bed, the effects of each suggested method were evaluated by experimental results.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.150-162
• /
• 2020

The proprietary post-combustion CO₂ solvent (KoSol) developed by the Korea Electric Power Research Institute (KEPRI) was applied at the Shanghai Shidongkou CO₂ Capture Pilot Plant (China Huaneng CERI, capacity: 120,000 ton CO₂/yr) of the China Huaneng Group (CHNG) for performance evaluation. The key results of the pilot test and data on the South Korean/Chinese electric power market were used to calculate the predicted cost of CO₂ avoided upon deployment of CO₂ capture technology in commercial-scale coal-fired power plants. Sensitivity analysis was performed for the key factors. It is estimated that, in the case of South Korea, the calculated cost of CO₂ avoided for an 960 MW ultra-supercritical (USC) coal-fired power plant is approximately 35~44 USD/tCO₂ (excluding CO₂ transportation and storage costs). Conversely, applying the same technology to a 1,000 MW USC coal-fired power plant in Shanghai, China, results in a slightly lower cost (32~42 USD/tCO₂). This study confirms the importance of international cooperation that takes into consideration the geographical locations and the performance of CO₂ capture technology for the involved countries in the process of advancing the economic efficiency of large-scale CCS technology aimed to reduce greenhouse gases

• 한국가스학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2016

기후변화의 가장 큰 원인 중 하나로 지목되는 이산화탄소의 배출량을 절감하기 위해 제안된 Carbon Capture and Storage (CCS) 전체공정의 에너지 및 비용저감이 시급한 현 시점에서 효율적인 연계공정의 도출이 중요하며 본 연구에서는 연소 후 습식아민 공정을 이용한 포집공정과 압축공정의 간의 연계를 통해 에너지를 저감할 수 있는 방법을 제안한다. 이는 기기적 증기 재압축 시스템 을 적용하여 압축기에 사용되는 전기에너지를 열에너지의 형태로 변환함으로써 포집공정에 필요한 리보일러의 에너지 사용량을 감소시키는 방법이다. 본 공정개선안은 압축기에 필요한 추가적인 투자비용 및 전기에너지를 고려하더라도 고압의 이산화탄소를 생산함과 동시에 전체적인 에너지 사용량을 절감시키는 장점이 있다. 또한 본 연구에서는 실제 Test Bed의 운전 결과를 통한 모델을 활용함으로써 보다 신뢰성 있는 절감 효과를 제안하고자 한다.

• 융복합기술연구소 논문집
• /
• 제11권1호
• /
• pp.13-18
• /
• 2021

It is widely accepted that the prevention of global warming requires significant reductions in greenhouse gases, particularly CO₂ emissions. Although fossil fuel-based power plants account for the majority of CO₂ emissions, it is urgent to reduce CO₂ emissions in industries that emit large amounts of CO₂ such as steel, petrochemical, and oil refining. This paper examines the current status of CO₂ emission in the domestic oil refining industry and CO₂ emission sources in each unit process in the oil refining industry. Focusing on the previously developed CO₂ capture process, cases and applicability of greenhouse gas reduction in FCC and hydrogen manufacturing processes, which are major processes constituting the oil refining industry, are reviewed.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.968-976
• /
• 2009

As the global warming becomes a serious environmental problem, studies of reducing $CO_2$ emission in power generation area are in progress all over the world. One of the carbon capture and storage(CCS) technologies is known as oxy-fuel combustion power generation system. In the oxy-fuel combustion system, the exhaust gas is mainly composed of $CO_2$ and $H_2O$. Thus, high-purity $CO_2$ can be obtained after a proper $H_2O$ removal process. In this paper, an oxy-fuel combustion cycle that recovers the waste heat of a high-temperature fuel cell is analyzed thermodynamically. Variations of characteristics of $CO_2$ and $H_2O$ mixture which is extracted from the condenser and power consumption required to obtain highly-pure $CO_2$ gas were examined according to the variation of the condensing pressure. The influence of the number of compression stages on the power consumption of the $CO_2$ capture process was analyzed, and the overall system performance was also investigated.