• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.117-126
• /
• 2012

The transportation sector accounts for 33% of the total $CO_2$ emissions. Effective control measures for reducing $CO_2$ emissions are urgently needed to address global warming. Objective and reliable methods to estimate $CO_2$ emissions are a prerequisite for the implementation of such effective control measures. However, existing models have not been successful. Even though the average-speed model is one of the most convenient and useful methods for estimating $CO_2$ emissions, it cannot distinguish between a variety of roads as well as traffic conditions in the model. The results of this study found that there may be significant discrepancies between emissions estimated by the current average-speed model and those measured in real driving conditions. This paper proposed the subdivision of emission factors in the average-speed model depending on both traffic and road conditions.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.47-53
• /
• 2000

To overcome the shortage of conventional TWC that is activated at high temperature, higher than 25$0^{\circ}C$, photocatalyst is considered as an new technology. Because the photocatalytic reaction of photocatalyst is not a thermo mechanical reaction, it is necessary to heat the system to start the reaction. It can be activated just by ultra violet light that includes wavelengths shorter than 400 nanometers even at ambient temperature. In this study photocatalytic reduction of hydrocarbon was investigated with a model gas test. To understand the effects of co-existence gases on the hydrocarbon reduction by photoreaction, CO and NO, $O_2, H_2O$ gases those are components of exhaust gases of gasoline engine are supplied with C3H8/N2 to a photoreactor. The photoreactor contains $TiO_2$ photocatalyst powders and a UV bulb. The results show that oxygen is the most important factor to reduce HC emission with photocatalyst. Photocatalyst seems to have a good probability for automotive application to reduce cold start HC emissions.

• Environmental and Resource Economics Review
• /
• v.22 no.3
• /
• pp.459-479
• /
• 2013

To assess the feasibility of 'low carbon, sustainable growth' policy pursued of the Chinese government, this paper first measures technical efficiency, $CO_2$ shadow prices, and indirect Morishima elasticity of substitution between capital and energy for 24 of manufacturing sectors in Beijing and Chongqing, in which China launched pilot carbon emissions trading scheme, by estimating the input distance function. Based on these results, then the potential for $CO_2$ reduction, cost savings from emissions trading, and the effectiveness of capital investment in reducing $CO_2$ are compared across industries and provinces. In 2010, manufacturing industries in Beijing and Chongqing could potentially reduce the largest $CO_2$ emissions, amounting 5.2 and 17 million tons, respectively, by achieving 100% technical efficiency. While, on average, Chongqing has a comparative advantage in the cost savings from carbon trading over Beijing, Beijing is more likely to reduce $CO_2$ by expanding capital investment.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.237-269
• /
• 2012

This study applies a discrete-continuous choice model to a national survey data set of automobile uses to investigate the potential impacts of a bonus-malus system for new cars in Korea. Not only the impacts on the discrete choice of automobile type and class but also those on the continuous decision making of car operation are analyzed. The characteristics of automobiles and individuals that determine car choice and operation are identified. The simulation based on the estimation result shows that an appropriately designed bonus-malus system can induce a reduction in energy consumption and $CO_2$ emission substantially without additional government expenditure.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.187-192
• /
• 2016

Chemical utilization of $CO_2$ is recognized as the technology for the reduction of greenhouse gas as well as the use of carbon to resources. Although various chemicals are commercially produced, the innovative development is still necessary to utilize large quantity of $CO_2$. In this report, the current status of technology to preserve -CO-O- linkage into the molecules was introduced, particularly for the synthesis of dimethyl carbonate (DMC) and polyols, which are raw materials of polycarbonate and polyurethane, respectively. RIST developed the novel process for the DMC production via urea methanolysis and the new catalytic system for polyol synthesis. Because of high contents of $CO_2$ in both chemicals, it is expected that they are able to contribute for the reduction of greenhouse gas.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.25-35
• /
• 2011

In order to reduce Green House Gas(GHG) reduction in the road freight sector and thus establish green logistics, running efficiency of goods vehicles is of paramount importance. Providing effective transportation infrastructure can contribute to achieve the green logistics by reducing empty running of heavy goods vehicles and van, increasing the average payload on the vehicle, and shifting the transportation mode. In order to reduce the environmental impact from the road freight sector, it is essential to quantify the amount of environmental loading from the sector. However, any systematic survey on the environmental loading from the logistics companies has not been carried out in Korea. In this study, the environmental index for the road freight sector is defined as the amount of $CO_2$ emission per ton km generated from goods vehicles. The computational analysis shows that the average $CO_2$ emission per ton km generated by the logistics companies in Korea is $363g-CO_2/ton{\cdot}km$. Compared to UK (=$130g-CO_2/ton{\cdot}km$) and France (=$97g-CO_2/ton{\cdot}km$), the efficiency of logistics in Korea is 2.8 and 3.7 times as low as in the advanced countries. It also indicates that the main reasons for the low efficiency are mainly due to the high rate of empty operation of goods vehicles and the low payload.

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.4-11
• /
• 2006

The idea of $CO_2$ sequestration in the ocean is proposed to be an effective mitigation strategy to counteract potential global warming due to the greenhouse effect. Therefore, in the present study, calculations of the dissolution behavior of $CO_2$ hydrate when liquid carbon dioxide is released at 1,000m and 1,500m in depth are performed. The results show the liquid $CO_2$ injected in the ocean becomes $CO_2$ bubble at between 350 m in depth, and the injection from a moving ship is a more effective method of dissolution than through a fixed pipeline. It so also noted that the ultimate plume generated from $CO_2$ bubbles repeats expansion and shrinking due to the peeling from a fixed pipeline.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.3
• /
• pp.280-288
• /
• 2016

Greenhouse gas (GHG) emissions have given rise to climate change which is one of the most serious environmental challenges that the world faces today. In response, Republic of Korea has proposed "Low Carbon, Green Growth" as a new economic paradigm accompanying with the ultimate aim of building a sense of responsibility for the environment. Korean government has set the ambitious national GHG emission reduction target which aims 37% reduction in the business-as-usual (BAU) level of 2030. The transportation sector plays a key role in this target. In the transportation sector, the GHG reduction target of 34.3% in the BAU level by 2020 has been allocated in order to consider the industrial specificity. Furthermore, it is known that the GHG reduction in the transportation sector has relatively minimal side effects compared to those of other sectors. In order to meet this national GHG reduction target, Korean government has set $CO_2$ emission regulation of vehicle for 2020. The purpose of this study is to evaluate the reduction effects by the average GHG regulation of vehicles. $CO_2$ emissions, between 2009 and 2013 were analysed by reduction measure such as technology improvement, light-weight, segment shift, diesel vehicle sales. During this period, $CO_2$ of vehicle was reduced every year by 19.9 g/km (i.e., 3.3% reduction per year). $CO_2$ reduction of imported vehicle is greater than domestic vehicle because of segment shift toward small size vehicle and higher diesel vehicle sales.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.577-580
• /
• 2008

Concrete absorbs $CO_2$ in the air because of carbonation. according to rising concern for lasting earth environment efforts of reducing greenhouse gas, especially co2, are occurred whole industry throughout the world. In this paper selected one building and computed amount of production and absorbtion of co2 during its lifecycle at concrete. In computing amount of absorbtion of co2 considered amount of absorbtion according to the area of concrete changing senarioes of servicelife(40,60,80 years) and deconstruct preiod(60,40,20 years). As a result, size of concrete and maintenance period of disused concrete work increasement of $CO_2$ as main factors. We came to the conclusion that maintenance period is more important than recycle of unused concrete as a method for reducing environmental load in architectural industry.