• 생태와환경
• /
• 제34권4호통권96호
• /
• pp.261-266
• /
• 2001

이산화탄소 농도가 증가할 때에 북구 이탄 습지에서 나타나는 생지화학적 변화과정을 살펴보았다. 표면 식생을 포함한 온전한 코어를 북웨일스의 이탄습지로부터 채취하여, 높은 이산화탄소농도(700ppm)와 자연상태 (350ppm)환경에서 4개월간 배양하였다. 배양 후, 화학적인 저해제를 이용하여 습지 토양에서 미량기체의 생성과 소비를 측정하였다. 메탄의 경우, 불화메탄($CH_3F$)를 이용하여 메탄 산화율을 결정하였고, 질산화와 탈질작용을 측정하기위해 아세틸렌($C_2H_2$)저해 방법을 적용하였다. 이를 위해, 먼저 각 측정 방법을 습지 시료에 적합하도록 최적화 시켰고, 둘째로 두 수준의 이산화탄소에서 배양한 시료에 이 방법들을 적용하였다. 높은 이산화탄소 농도는 메탄의 생성량을 증가 시켰으나(210대 $100\;ng\;CH_4 g^{-1}\;hr^{-1}$), 메탄 산화의 양도 증가시켜서 (128대 $15\;ng\;CH_4 g^{-1}\;hr^{-1}$) 결국에는 순메탄 방출량에는 변화가 없었다. 아산화질소의 경우에는 증가된 발생량이 탈질 보다는 질산화 과정에서 생성된 것으로 사료된다. 이러한 변화들은 높은 이산화탄소 하에서 조류의 성장이 증가되어 야기된 것으로 추측된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.149-156
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• 한국연소학회지
• /
• 제11권1호
• /
• pp.19-26
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.776-783
• /
• 2010

수소생산을 위한 메탄의 부분산화용 촉매로 알루미나에 담지된 코발트와 니켈 촉매를 함침법으로 제조하였다. 메탄의 부분산화반응을 위한 이들 촉매의 반응활성은1기압, $CH_4/O_2=2.0$과 $450{\sim}650^{\circ}C$의 온도영역에서 조사하였다. 담지량이 다른 코발트촉매와 니켈촉매의 반응활성을 비교하고 코발트촉매에 니켈을 첨가한 이성분금속 촉매의 반응활성을 조사하였다. 그리고 코발트촉매와 니켈촉매에 첨가된 Ce와 La의 첨가효과를 조사하였다. 이들 촉매의 특성은 XRD와 SEM/EDX로 분석하였다. 코발트와 니켈은 10 wt%의 담지량이 적절한 것으로 나타났다. 이들 10 wt% 담지 코발트와 니켈촉매는 열역학적 평형값에 가까운 메탄의 전환율과 CO의 선택성을 나타내었으나 $H_2$의 선택성은 평형값보다 다소 낮게 나타났다. 코발트촉매에 니켈을 첨가한 이성분금속 촉매에서 $H_2$의 선택성은 증가하였으나 전환율을 고려하면 니켈을 첨가한 이점은 나타나지 않았다. 코발트촉매에서는 Ce의 첨가와 니켈촉매에서는La의 첨가로 메탄의 전환율과 수소의 선택성을 높일 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.949-955
• /
• 2000

Numerical study with detailed chemistry has been conducted to investigate the NOx formation and structure in $CH_4/Air-CO_2$ counterflow diffusion flames. The importance of radiation effect is identified and the role of $CO_2$ addition is addressed to thermal and chemical reaction effects, which can be precisely specified through the introduction of an imaginary species. Also NO separation technique is utilized to distinguish the contribution of thermal and prompt NO formation mechanisms. The results are as follows : The radiation effect is dominant at low strain rates and it is intensified by $CO_2$ addition. Thermal effect mainly contributes to the changes in flame structure and the amount of NO formation but the chemical reaction effect also cannot be neglected. It is noted that flame structure is changed considerably due to the addition of $CO_2$ in such a manner that the path of methane oxidation prefers to take $CH_4 {\rightarrow}CH_3{\rightarrow}C_2H_6{\rightarrow}C_2H_5$ instead of $CH_4 {\rightarrow}CH_3{\rightarrow}CH_2{\rightarrow}CH$. At low strain rate(a=10) the reduction of thermal NO is dominant with respect to reduction rate, but that of prompt NO is dominant with respect to total amount.

• Membrane and Water Treatment
• /
• 제8권2호
• /
• pp.171-184
• /
• 2017

This study presents the effect of hydraulic retention time (HRT) on the characteristics of emission of three major greenhouse gases (GHGs) including $CH_4$, $CO_2$ and $N_2O$ during operation of a sequencing batch reactor for aerobic oxidation of methane with denitrification (AeOM-D SBR). Dissolved $N_2O$ concentration increased, leveled-off and slightly decreased as the HRT increased from 0.25 to 1d. Concentration of the dissolved $N_2O$ was higher at the shorter HRT, which was highly associated with the lowered C/N ratio. A longer HRT resulted in a higher C/N ratio with a sufficient carbon source produced by methanotrophs via methane oxidation, which provided a favorable condition for reducing $N_2O$ formation. With a less formation of the dissolved $N_2O$, $N_2O$ emission rate was lower at a longer HRT condition due to the lower C/N ratio. Opposite to the $N_2O$ emission, emission rates of $CH_4$ and $CO_2$ were higher at a longer HRT. Longer HRT resulted in the greater total GHGs emission as $CO_2$ equivalent which was doubled when the HRT increased from 0.5d to 1.0 d. Contribution of $CH_4$ onto the total GHGs emission was most dominant accounting for 98 - 99% compared to that of $N_2O$ (< 2%).

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.439-444
• /
• 1993

The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.60-64
• /
• 2003

The reactions of $[Pt(dppf)Cl_2]$ with thiophenol (PhSH), 1-propanethiol (n-PrSH), and 1,3-propanedithiol $(HSCH_2CH_2CH_2SH)$ gave the corresponding Pt-dppf-di(thiolato) compounds, $[Pt(dppf)(SPh)_2]\;(1),\;[Pt(dppf)(S-n-Pr)_2]\;(2),\;and [Pt(dppf)(SCH_2CH_2CH_2S)]\;(3)$, respectively. All products are monomeric and 4-coordinate square-planar compounds and were structurally characterized by X-ray diffraction. Electrochemical measurements (cyclovoltammograms) revealed that the oxidation potential of the dppf ligand appears to depend on the type of the group on the thiolato ligand.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2018년도 정기학술대회 발표논문집
• /
• pp.130-130
• /
• 2018

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.953-958
• /
• 2010

A laser ablation-molecular beam/reflectron time-of-flight mass spectrometric technique was used to investigate the ion-molecule reactions that proceed within $Ti^+(CH_3COCH_3)_n$ heterocluster ions. The reactions of $Ti^+$ with $CH_3COCH_3$ clusters were found to be dominated exclusively by an oxidation reaction, which produced $TiO^+(CH_3COCH_3)_n$ clusters. These ions were attributed to the insertion of a $Ti^+$ ion into the C=O bond of the acetone molecule within the heteroclusters, followed by $C_3H_6$ elimination. The mass spectra also indicated the formation of minor sequences of heterocluster ions with the formulas $Ti^+(C_3H_4O)(CH_3COCH_3)_n$ and $TiO^+(OH)(CH_3COCH_3)_n$, which could be attributed to C-H bond insertion followed by $H_2$ elimination and to the sequential OH abstraction by the $TiO^+$ ion, respectively. Density functional theory calculations were carried out to model the structures and binding energies of both the association complexes and the relevant reaction products. The reaction pathways and energetics of the $TiO^+\;+\;CH_2CHCH_3$ product channel are presented.