• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.93-101
• /
• 2000

The objective of this study was to evaluate the possibility of co-digestion of food waste and sewage sludge mixture using anaerobic system. The Biochemical methane Potentials of cabbage and food waste were $297ml\;CH_4/g$ VS and $306.7ml\;CH_4/g$ VS, respectively. The biodegradability of food waste was 60%. The concentrations of acetate, propionate, and isobutyrate produced during the aerobic acidogenesis of food waste for 36 hours were 7,000~7,200 ppm, 260~280 ppm, 380~400 ppm, and 40~50 ppm, respectively, of which acetate was over 85%. The concentrations of acetate, propionate, and isobutyrate produced during the anaerobic acidogenesis for 36 hours were 1,400~1,600 ppm, 30~40 ppm, 220~250 ppm, and 260~300 ppm, respectively, of which acetate was over 70%. The biodegradabilities of aerobic and anaerobic acidogenesis were 30% and 25%, respectively. Methanogensis could be activated under 1 % of NaCl and 1,000 ppm of volatile fatty acids at the range of pH 6.8~7.2. The maximum mixture ratio of food waste and sewage sludge in the present study was 2:8 by the result of VS removal rate and Methane production.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.853-858
• /
• 2003

The reaction mechanism of the pyrolysis of sulphonyl oximes ($CH_3-C_6H_4-S(O)_2O-N=C(H)-C_6H_4Y$), in the gas phase is studied theoretically at HF/3-21G, ONIOM (B3LYP/6-31G**:HF/3-21G) and ONIOM (MP2/6- 31G**:HF/3-21G) levels. All the calculations show that the thermal decomposition of sulphonyl oximes is a concerted asynchronous process via a six-membered cyclic transition state. The activation energies (Ea) predicted by ONIOM (B3LYP/6-31G**: HF/3-21G) method are in good agreement with the experimental results for a series of tosyl arenecarboxaldoximes. Five para substituents, Y = $OCH_3$, $CH_3$, H, Cl, and $NO_2$, are employed to investigate the substituent effect on the elimination reaction. Linear Hammett correlations are obtained in all calculations in contrast to the experimental finding.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.633-643
• /
• 1989

The R$Rh_2(ap)_4$(2,2-trans) isomer (ap = 2-anilinopyridinate), which has two anilino nitrogens and two pyridyl nitrogens bound to each rhodium ion trans to their own kind, shows activation towards the one electron reduction of dioxygen at -0.40 V vs SCE. The ESR spectrum taken at 123 K proves the formation of a $[Rh_2(ap)_4(O_2)]$ ion with oxygen axially bound to one rhodium ion and the complex is at a RhⅡ2 oxidation state. The complex will form [$Rh_2(ap)_4(O_2)(CH_3CN)]^-$ in presence of $CH_3CN/CH_2Cl_2$ mixture without breaking the Rh-$O_2^-$ bond. When oxidized at -0.25 and 0.55 V, $[Rh_2(ap)_4(O_2)]$ will undergo two one electron oxidations to form $Rh_2(ap)_4(O_2)[Rh_2(ap)_4(O_2)]^+$. Both species have an axially bound superoxide ion but the former is at $Rh^{II}Rh^{III }$and the later at $Rh^{III}_2$ oxidation states. The ESR spetra and $CH_3CN$ addition study, on the other hand, show that the later complex is better described as $[Rh_{II}Rh^{III}(ap)_4(O_2)]^+$ with the odd electron localized on rhodium ion and the complex has an axially coordinated molecular oxygen. The electrochemical and ESR studies also show that the degree of dioxygen activation is a function of electrochemical redox potential.

• Journal of the Korean Chemical Society
• /
• v.40 no.4
• /
• pp.243-248
• /
• 1996

New routes have been developed for the practical syntheses of dl-Muscone(1) employing cyclopentadecanone(2) as the starting material. In this experiment, addition of bromine to cyclopentadecanone in dried E. Ether solution with a trace of $AlCl_3$ as the catalyst were produced 2-bromocyclopentadecanone(3). This process was enhanced formation of regioselective enolate anion at $C_2$ position. 2-Bromocyclopentadecanone was put into $Li_2CO_3$-LiBr-DMF solution at 140∼150$^{\circ}C$, were produced trans- and cis-2-cyclopentadecen-1-one(4) mixture. Other by-products were reduced by control of reaction temperature and time. Trans- and cis-2-cyclopentadecen-1-one(4) mixture was directly put into dried E. Ether solvent and induce to react dropwise with $CH_3MgBr-Cu_2Cl_2$ complex, all of them got into 1,4-addition, dl-Muscone (1) was formed as the result. Conculsion, through three steps procedure from cyclopentadecanone(2) to dl-Muscone(1), the pure dl-Muscone was obtained with the high proportion of 85%, and synthetic cost was able to be much lower than any other conventional methods as there were no chemical separating steps.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.344-347
• /
• 2007

The aerial parts of Lespedeza cuneata were collected, air-dried and extracted with 95% aqueous EtOH. Then it was successively partitioned with n-hexane, $CH_2Cl_2$, EtOAc and $H_2O$. Repeated Sephadex LH-20 column chromatography on the EtOAc- and $H_2O-soluble$ fractions gave four compounds. Their structures were elucidated as quercetin (1), kaempferol (2), desmodin (3) and homoadonivernith (4) on the basis of spectroscopic evidences such as $^{1}H-NMR$, $^{13}C-NMR$, 2D-NMR and MS spectrum. Desmodin (3) and homoadonivernith (4) have not been reported from this plant so far.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.299-302
• /
• 2011

[ $WO_3$ ]powders were ball-milled with an alumina ball for 0-72 hours. $In_2O_3$ doped $WO_3$ was prepared by soaking ball-milled $WO_3$ in an $InCl_3$ solution. The mixed powder was annealed at $700^{\circ}C$ for 30 min in an air atmosphere. A paste for screen-printing the thick film was prepared by mixing the $WO_3$:In2O3 powders with ${\alpha}$-terpinol and glycerol. $In_2O_3$ doped $WO_3$ thick films were fabricated into a gas sensor by a screen-printing method on alumina substrates. The structural properties of the $WO_3$:$InO_3$ thick films were a monoclinic phase with a (002) dominant orientation. The particle size of the $WO_3$:$InO_3$ decreased with the ball-milling time. The sensing characteristics of the $In_2O_3$ doped $WO_3$ were investigated by measuring the electrical resistance of each sensor in the test-box. The highest sensitivity to 5 ppm $CH_4$ gas and 5 ppm $CH_3CH_2CH_3$ gas was observed in the ball-milled $WO_3$:$InO_3$ gas sensors at 48 hours. The response time of $WO_3$:$In_2O_3$ gas sensors was 7 seconds and recovery time was 9 seconds for the methane gas.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2000

The polymethylene-bridged dinuclear half-titanocenes [(CH$_2$)$_{n}$(C$_{5}$ H$_4$)$_2$][TiCl$_3$]$_2$ (n=5(10), 7(11), 9(12)) have been synthesized by treating the distannylated derivatives of the ligands with two equivalents of TiCl$_4$ in toluene. All complexes are characterized by IR, $^1$H NMR, $^{13}$ C NMR and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has been conducted in the presence of MMAO. From the polymerization experiments it was found that ( i ) all the prepared complexes 10-12 produced syndiotactic polystyrenes, ( ii ) the complex 12 holding the longest bridging ligand exhibited the highest activity but produced a polymer having the smallest molecular weight among the polymethylene-bridged dinuclear half-titanocenes. This behavior was attributed to the influence of electron-donating caused by the polymethylene bridge between two active centers as well as the effect of steric congestion around metal center caused by the proximal distance between two active sites.s.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.32-36
• /
• 2000

Pyrolytic preparations of Ti-Al-N ceramics from three blended precursors were investigated. The precursors were prepared stirring ($HA1N^{i}Pr_m$ and an aminolysis product of $Ti(NMe_2)_4$ with $MeHNCH_2CH_2$NHMe in $C_6/H_6$ . IR and $^1H\;NMR $analyses suggested that essentially no Ti-N-Al bonds were present in the precursors. Pyrolysis of the precursors under $NH_3-N_2$led to the formation of brown solids with ceramic yields of about 30%, and the Ti-Al ratios in the pyrolyzed products were close to those of the precursors. XRD analysis of the pyrolyzed product from the precursor with Ti:Al=5:1 indicated the formation of a NaCl-type compound as the only crystalline phase. Pyrolysis of the precursor with Ti:Al=2:1 led to the formation of AlN besides the major NaCl-type compound. A ceramic composite containing AlN and the NaCl-type compound was formed by pyrolysis of the precursor with Ti:Al=1:2.

• Journal of Photoscience
• /
• v.11 no.1
• /
• pp.7-9
• /
• 2004

The synthesized macrocycle L was found to be a smart fluorescent receptor which distinguishable efficiently from various neutral molecules with the functional groups such as the electron donating (X =$CH_3$, N($CH_3$)$_2$ and O$CH_3$) and electron withdrawing groups (X =F and Cl), respectively. In the case of guest molecules containing electron donating groups, the fluorescence of macrocycle L was enhanced in the presence of the guest molecules. On the contrary, in the case of guest molecules containing electron withdrawing groups, it was almost quenched in the presence of those.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.221-228
• /
• 1976

The kinetics of hydrolysis of hydrazonyl bromides $(p-H,\;p-CH_3,\;p-OCH_3,\;p-Br,\;p-Cl\;&\;p-NO_2)$ have been investigated by UV spectrometry in $60{\%}$ dioxane-water at $25^{\circ}C$ and a rate equation which can be applied over wide pH range was obtained. Below pH2, the rate of hydrolysis of a series of hydrazonyl bromide is accelerated by electrondonating group (${\rho}$ = -0. 94) whereas at the pH values greater than 4, the ${\rho}$-value is 0.54. The rate equation, solvent-, substituent-and bromide ion-effect on the rate of hydrolysis are rationalized in terms of $S_N1$ and $S_N2$ mechanism: below pH 2, the hydrolysis proceed through $S_N2$, however, above pH 4, the hydrolysis is started by the attack of hydroxide ion and in the range pH 2{\sim}$4, these two reactions occur competitively.