• 한국식품영양과학회지
• /
• 제40권8호
• /
• pp.1099-1106
• /
• 2011

본 연구는 다량으로 폐기되는 오이를 이용하기 위하여 개발한 오이 발효원액을 주원료로 제조한 숙취해소 음료의 간보호 효능을 검증하기 위하여 만성적으로 에탄올을 섭취시킨 흰쥐에서 에탄올 대사, 항산화 방어계, 간독성 관련지표 및 지질함량 변화를 살펴보았다. 실험동물은 4주령의 수컷 SD계 흰쥐 24마리를 1주간 고형식이로 적응시킨 후 난괴법에 의하여 에탄올대조군(Control) 및 에탄올 섭취 흰쥐에게 헛개열매 추출물을 주원료로 하여 개발한 숙취해소 물질인 SKM 급여군(SKM) 또는 SKM을 함유한 오이 발효음료 급여군(CF+SKM)으로 나누었다. SKM과 CF+SKM은 사람의 하루 섭취량을 기준으로 체중 kg당 7 mL씩 매일 일정시각에 경구투여 하였다. SKM과 CF+SKM은 체중과 식이섭취에는 영향을 미치지 않았으며, CF+SKM군의 신장무게가 대조군보다 낮았다. 혈장 중 에탄올 함량은 대조군에 비하여 CF+SKM군에서 유의적으로(p<0.05) 낮았으며, SKM군은 낮은 경향을 보였다. 혈장 중의 아세트알데히드 함량은 대조군에 비하여 SKM과 CF+SKM군 모두 각각 40.6%와 48.4% 유의적인(p<0.05) 개선 효과를 보였다. 간조직 중의 ADH 활성은 실험군간 유의적인 변화가 없었으나 CYP2E1 활성은 SKM과 CF+SKM 모두 대조군에 비하여 유의적으로 (p<0.05) 낮았다. 간조직의 CYP2E1 활성은 혈장 중의 아세트알데히드 함량과 양의 상관관계(r=0.566, p<0.01)였다. 간조직의 ALDH 활성은 SKM과 CF+SKM 모두 대조군에 비하여 유의적으로(p<0.05) 높았으며 혈장의 아세트알데히드 농도와 유의적 음의 상관관계(r=-0.564, p<0.01)를 보였다. SKM군과 CF+SKM군의 간조직내 SOD와 CAT 활성과 GSH 함량이 대조군에 비하여 유의적으로 높았다. 반면, SKM과 CF+SKM은 간조직 중의 지질과산화물 생성을 대조군에 비하여 각각 유의적으로 낮추었다. SKM과 CF+SKM 급여 시 에탄올대조군에 비하여 각각 AST 활성은 29%와 44% 낮았으며, ALT 활성은 42%와 34% 낮았다. 혈장의 총 콜레스테롤과 간조직의 콜레스테롤 함량은 대조군에 비하여 SKM과 CF+SKM군에서 유의적으로(p<0.05) 낮았으며 특히, CF+SKM의 간조직내 중성지질 함량은 대조군에 비하여 유의적으로(p<0.05) 낮았다. SKM군과 CF+SKM군의 간조직 중 지방축적이 대조군에 비하여 감소되었다. 이와 같이 SKM과 CF+SKM은 간조직의 CYP2E1 활성을 억제하고 ALDH 활성과 항산화 방어계를 향상시킴으로써 에탄올로 인한 간독성을 보호할 수 있을 것으로 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.52-55
• /
• 2000

In this study, (Ba,Sr)$TiO_3$(BST) thin films were etched with a magnetically enhanced inductively coupled plasma(MEICP) as a function Ar/$CF_4$ gas mixing ratio. Experiment was done by varying the etching parameters such as rf power, dc bias voltage and chamber pressure. The maximum etch rate of the BST films was 1700 ${\AA}/min$ under $CF_4/(CF_4+Ar)$ of 0.1, 600 W/350 V and 5 mTorr. The selectivity of BST to Pt and PR was 0.6, 0.7, respectively. X -ray photoelectron spectroscopy(XPS) studies shows that there are surface reaction between Ba, Sr, Ti and C, F radicals during the etching. To analyze the composition of surface residue remaining after the etching, films etched with different $CF_4$/Ar gas mixing ratio were investigated using XPS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.209-212
• /
• 2001

Polyimide(PI) films have been considered as the interlayer dielectric materials due to low dielectric constant, low water absorption, high gap-fill and planarization capability. The PI film was etched with using inductively coupled plasma (ICP). The etching characteristics such as etch rate and selectivity were evaluated to gas mixing ratio. High etch rate was 8300$\AA$/min and vertical profile was approximately acquired 90$^{\circ}$ at CF$_4$/(CF$_4$+O$_2$) of 0.2. The selectivies of polyimide to PR and SiO$_2$ were 1.2, 5.9, respectively. The etching profiles of PI films with an aluminum pattern were measured by a scanning electron microscope (SEM). The chemical states on the PI film surface were investigated by x-ray photoelectron spectroscopy (XPS). Radical densities of oxygen and fluorine in different gas mixing ratio of 07CF4 were investigated by optical emission spectrometer (OES).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.375-378
• /
• 2002

We investigated the reduction of etching damage by additive O$_2$ in etching gas and recovery of etching damage by O$_2$ annealing. The PZT thin films were etched using additive Ar or O$_2$ into Cl$_2$/CF$_4$ gas mixing ratio of 8/2. In order to recover ferroelectric properties of PZT thin films after etching, the etched PZT thin films were annealed at 600 C in O$_2$ atmosphere for 10 min. The remanent polarization is decreased seriously and fatigue is accelerated in the PZT sample etched in Ar/(C1$_2$+CF$_4$) plasma, whereas these characteristics are improved in O$_2$/(Cl$_2$/CF$_4$). From x-ray photoelectron spectroscopy (XPS) analysis, the intensities of Pb-O, Zr-O and Ti-O peaks are changed and the etch byproducts such as metal chloride and metal fluoride are reduced by O$_2$ annealing. From electron probe micro analyzer (EPMA) and auger electron spectroscopy(AES), O$_2$ vacancy is observed after etching. In x-ray diffraction (XRD), the structure damage in the additive O$_2$ into C1$_2$/CF$_4$ is reduced and the improvement of ferroelectric behavioral annealed sample is consistent with the increase of the (100) and (200) PZT peaks.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.46-50
• /
• 2005

BST thin films were etched with inductively coupled CF$_{4}$/(Cl$_{2}$+Ar) plasmas. The etch characteristics of BST thin films as a function of CF$_{4}$/(Cl$_{2}$+Ar) gas mixtures were analyzed using optical emission spectroscopy (OES) and Langmuir probe. The BST films in CF$_{4}$/Cl$_{2}$/Ar plasma is mainly etched by the formation of metal chlorides which depends on the emission intensity of the atomic Cl and the bombarding ion energy. The maximum etch rate of the BST thin films was 53.6 nm/min because small addition of CF$_{4}$ to the Cl$_{2}$/Ar mixture increased chemical and physical effect. A more fast etch rate of BST films can be obtained by increasing the DC bias and the RF power, and lowering the working pressure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.187-190
• /
• 2004

In this work, we investigated etching characteristics and mechanism of BST thin films using $Cl_2$/Ar, $CF_4/Cl_2$/Ar and $BCl_3/Cl_2$/Ar gas mixtures using inductively coupled plasma (ICP) system. A chemically assisted physical etch of BST was experimentally confirmed by ICP under various gas mixtures. The etch rate of the BST thin films had a maximum value at 20 $BCl_3$ and 10% $CF_4$ gas concentration, and decreased with further addition of $BCl_3$ or $CF_4$ gas, because $BaCl_x$, $SrCl_x$, $BaF_x$ and $SrF_x$ compounds have higher melting and boiling points. The maximum etch rate of the BST thin films was 57nm/min at the 30% $Cl_2(Cl_2+Ar)$. The characteristics of the plasma were analyzed by using OES and Langmuir probe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.190-194
• /
• 2002

In this study, the etching of Au thin films have been performed in an inductively coupled CF4/Cl2/Ar plasma. The etch properties were measured as the CF4 adds from 0 % to 30 % to the Cl2/(Cl2 + Ar) gas mixing ratio of 0.2. Other parameters were fixed at a rf power of 700 W, a dc bias voltage of 150 V, a chamber pressure of 15 mTorr, and a substrate temperature of $30^{\circ}C$. The highest etch rate of the Au thin film was 370 nm/min at a 10 % additive CF4 into Cl2/(Cl2 + Ar) gas mixing ratio of 0.2. The surface reaction of the etched Au thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. From x-ray photoelectron spectroscopy (XPS) analysis, the intensities of Au peaks are changed. There is a chemical reaction between Cl and Au. Au-Cl is hard to remove on the surface because of its high melting point and the etching products can be sputtered by Ar ion bombardment. We obtained the cleaned and steep profile.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.222.2-222.2
• /
• 2016

트랜지스터 응용 등에 관한 연구가 활발해 지면서 에너지 밴드갭이 0 eV에 가까운 그래핀 이외의 밴드 갭 조절이 가능한 MoS2 (molybdenum disulfide), BN (boron nitride), Bi2Te3 (bismuth telluride), WS2 (tungsten disulfide) 등과 같은 이차원 Transition Metal DiChalcogenides (TMDC) 물질이 반도체 물질로 각광받고 있다. 특히 MoS2의 경우 단결정 덩어리 상태에서는 약 1.3 eV의 밴드갭을 가지나 두께가 줄어들어 두 층일 경우에는 약 1.65 eV, 단일층이 되면 약 1.9 eV의 밴드갭을 가져 박막 층수에 따라 에너지 밴드갭 조절이 가능한 것으로 알려져있다. 하지만 두께 조절이 가능하면서 대면적, 고품질을 가지는 MoS2 박막 합성은 아직 제한적이라 할 수 있으며 새로운 방법 및 물질에 대한 연구가 지속적으로 이루어 지고 있다. 따라서 본 연구에서는 다양한 층수를 지니는 MoS2 합성을 위해 나노 두께의 MoS2 박막을 CF4 plasma 를 이용하여 layer etching 진행하고 CF4 plasma 100초 etching 진행한 2 layer 두께의 MoS2를 기준으로 H2S plasma를 이용하여 treatment 진행하였다. 물리적, 화학적 분석은 Raman spectroscopy, XPS(X-ray Photoelectron Spectroscopy), AFM (Atomic Force Microscopy) 등을 이용해 진행하였고 이를 통해 MoS2 layer 감소 및 damage recovery 등을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.449-453
• /
• 2003

Ferroelectric YMnO$_3$ thin films were etched with Ar/Cl$_2$ and CF$_4$/Cl$_2$ inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ thin film was 300 $\AA$/min at a Ar/Cl$_2$ gas mixing ratio of 2/8, a RF power of 800 W, a DE bias of 200 V, a chamber pressure of 15 mTorr, and a substrate temperature of 30 $^{\circ}C$. From the X-ray photoelectron spectroscopy (XPS) analysis, yttrium etched by chemical reactions with Cl radicals assisted by Ar ion bombardments in Ar/Cl$_2$ plasma. In CF$_4$/Cl$_2$ plasma, yttrium are remained on the etched surface of YMnO$_3$ and formed of nonvolatile YF$_{x}$ compounds manganese etched effectively by chemical reactions with Cl and F radicals. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the YMnO$_3$ thin film etched in Ar/Cl$_2$ plasma shows lower value than that in CF$_4$/Cl$_2$ plasma. It indicates that the crystallinty of YMnO$_3$ thin film is more easily damaged by the Ar ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.s.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1252-1257
• /
• 2004

This paper describes the information for quantitative simulation of weakly ionized plasma. In previous paper, we calculated the electron transport coefficients by using two-term approximation of Boltzmann equation. But there is difference between the result of the two-term approximation of the Boltzmann equation and experiments in pure CF$_4$ molecular gas and in CF$_4$+Ar gas mixture. Therefore, In this paper, we calculated the electron drift velocity (W) in pure CF$_4$ molecular gas and CF$_4$+Ar gas mixture (1 %, 5 %, 10 %) for range of E/N values from 0.17～300 Td at the temperature was 300 K and pressure was 1 Torr by multi-term approximation of the Boltzmann equation by Robson and Ness. The results of two-term and multi-term approximation of the Boltzmann equation have been compared with each other for a range of E/N.