• 전력전자학회논문지
• /
• 제3권1호
• /
• pp.23-35
• /
• 1998

영구자석 동기전동기의 제어에 있어서 토오크 맥동은 전동기 제어성능 결정에 큰 요인으로 작용한다. 본 논문에서는 이러한 토오크 맥동을 효과적으로 저감하기 위한 새로운 토오크 추정 및 제어기법에 대해서 다룬다. 제안된 기법에서는 모델 기준 적응시스템(Model reference adaptive system ; MRAS) 기법을 이용하여 순시 토오크를 추정하고 적본형 가변구 조제어(Integral variable structure control ; IVSC)를 이용하여 추정된 토오크를 제어한다. DSP를이용하여 고 토오크 영구자석 동기전동기 제어시스템을 구성하고 실험을 수행하였으며 그 결과 제안된 제어기법이 우수한 토오크 맥동 저감효과를 가짐을 입증하였다.

• Wind and Structures
• /
• 제15권1호
• /
• pp.1-15
• /
• 2012

High-resolution wind data were acquired from a 100-m high offshore tower during the passage of Typhoon Hagupit in September, 2008. The meteorological tower was equipped with an ultrasonic anemometer and a number of cup anemometers at heights between 10 and 100 m. Wind characteristics of the strong typhoon, such as mean wind speed and wind direction, turbulence intensity, turbulence integral length scale, gust factor and power spectra of wind velocity, vertical profiles of mean wind speed were investigated in detail based on the wind data recorded during the strong typhoon. The measured results revealed that the wind characteristics in different stages during the typhoon varied remarkably. Through comparison with non-typhoon wind measurements, the phenomena of enhanced levels of turbulence intensity, gust factors, turbulence integral length scale and spectral magnitudes in typhoon boundary layer were observed. The monitored data and analysis results are expected to be useful for the wind-resistant design of offshore structures and buildings on seashores in typhoon-prone regions.

• 수산해양교육연구
• /
• 제5권2호
• /
• pp.119-127
• /
• 1993

This work studies for heat transfer and pressure drop performance of integral inner and outer fin tubes, designed to enhance the heat transfer performance of smooth tubes for in recipro and turbo refrigerator or high performance compact heat exchangers. Eight different inner spiral fin copper tubes with integral fin at outside surfaces were employed to improve boiling heat transfer coeffcient. For comparison, tests were made using a plain tube having the inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Pool boiling heat transfer is investigated experimentally and theoretically on single tube arrangement. The refrigerant evaporates at a saturation state of 1 bar on the outside tube surface heated by hot water. The refrigerant R11 ($CFCl_3$) was used at a pressure of $P_s=1bar$ as a convenient test fluid with a boiling temperature of $T_s=23.6^{\circ}C$. The observed heat transfer enhancement of boiling for finned tubes significantly exceeded that to be expected on grounds of increased area. The maximum Vapor - side enhancement(i.e., vapor - side heat transfer coefficient of finned tube/vapor - side coefficient for plain tube) was found to be around 4 at 1299fpm - 30grooves tube.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.13-24
• /
• 1993

The rapid progress of the intermodal freight transportation in recent years has induced fierce competition among the adjacent hub ports for container transport. This brings increased attention to the evaluation of the port competitive ability. But it is not easy to evaluate the port competitive ability because this belongs to ill-defined system which is composed of ambiguous interacting attributes. Paying attention to this point, this paper deals the competitive ability of container port in Far-East Asia by fuzzy integral evaluation which is adequate to interacting ambiguous attribute problem. For this, the proposed fuzzy evaluation algorithm is applied to the real problem, based on the factors such as cargo volumes, costs, services, infrastructure and geographical sites These are extracted from the precedent study of port competitive ability, etc. The results show that the port evaluation factors come in following order ; services, costs, infrastructure, geographical sites and cargo volumes. There are some interactions(interaction coefficient, ${\lambda}=-0.664$ between evaluation attributes. The port competitive ability comes in following order : Singapore, Hongkong, Kobe, Kaoshiung and Busan. According to the sensitivity analysis, the rank between Busan and Kaoshiung changes when ${\lambda}=0.7$. From the analysis of the results, we confirmed that the proposed fuzzy evaluation algorithm is very effective in the complex-fuzzy problem which is composed of hierarchical structure with interacting attributes.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.741-751
• /
• 2021

There has been a deep interest in trying to find better-performing fuel clad motivated by the desire to decrease the likelihood of the reactor barrier failure like what happened in Fukushima in recent years. In this study, the effect of move towards accident tolerant fuel (ATF) cladding as the most attracting concept for improving reactor safety is investigated for SMART modular reactor. These reactors have less production cost, short construction time, better safety and higher power density. The SiC and FeCrAl materials are considered as the most potential candidate for ATF cladding, and the results are compared with Zircaloy cladding material from reactor physics point of view. In this paper, the calculations are performed by generating PMAX library by DRAGON lattice physics code to be used for further reactor core analysis by PARCS code. The differential and integral worth of control and safety rods, reactivity coefficient, power and temperature distributions, and boric acid concentration during the cycle are analyzed and compared from the conventional fuel cladding. The rod ejection accident (REA) is also performed to study how the power changed in response to presence of the ATF cladding in the reactor core. The key quantitative finding can be summarized as: 20 ℃ (3%) decrease in average fuel temperature, 33 pcm (3%) increase in integral rod worth and cycle length, 1.26 pcm/℃ (50%) and 1.05 pcm/℃ (16%) increase in reactivity coefficient of fuel and moderator, respectively.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4460-4473
• /
• 2022

The behaviour of the fission gas plays an important role in the fuel rod performance. In a previous work, we presented a physics-based model describing intra- and inter-granular behaviour of radioactive fission gas. The model was implemented in SCIANTIX, a mesoscale module for fission gas behaviour, and assessed against the CONTACT 1 irradiation experiment. In this work, we present the multi-scale coupling between the TRANSURANUS fuel performance code and SCIANTIX, used as mechanistic module for stable and radioactive fission gas behaviour. We exploit the coupled code version to reproduce two integral irradiation experiments involving standard fuel rod segments in steady-state operation (CONTACT 1) and during successive power transients (HATAC C2). The simulation results demonstrate the predictive capabilities of the code coupling and contribute to the integral validation of the models implemented in SCIANTIX.

• 수산해양기술연구
• /
• 제24권2호
• /
• pp.83-93
• /
• 1988

본 연구에서는 J 적분을 이용하여 두께의 변화에 따른 파괴인성치의 거동을 검토하기 위하여 두께 25mm의 일반구조용 압연강판을 평면가공하여 두께 5, 10, 15, 20, 25mm의 CT 시험편을 제작하였다. 이때 크랙비는 z=0.60인 상태에서 두께를 변화시켜가면서 파괴인성수 J 하(C)와 열단계수 T의 거동을 고찰하였다. 얻어진 결과를 요약하면 다음과 같다. 1) 평면응력 파괴인성치 J 하(C)는 각각의 두께에 대하여 Merkle식에 의한 결과가 가장 높게 나타나고 Rice식, Simpson식, Yoon식의 순서로 나타난다. 2) 평면응력 파괴인성치 J 하(C)는 동일한 J 적분식을 적용하였을 때 두께가 감소함에 따라 증가하였다가 두께 15mm를 기준으로 다시 감소한다. 3) Yoon식을 사용할 경우 평면응력 파괴인성치 J 하(C)와 시험편 두께 B의 상관관계를 무차원화시켜 다음과 같은 실험식을 얻었다. J 하(C)/J 하(IC)=1.7-15.1(B/W)+112.9(B/W) 상(2) -301.3(B/W) 상(3) +260.6(B/W) 상(4) R=0.999 4) 열단계수 T는 각각의 두께에 대하여 Merkle식에 의한 결과가 가장 높게 나타나며, Rice식, Simpson식, Yoon식에 의한 결과의 순으로 나타난다. 5) 열단계수 T는 각각의 단면의 두께에 대하여 동일한 J 적분식을 적용하였을 때 두께의 변화에 따라 거의 일정한 값을 나타내며, 이에 많은 대한 연구 검토가 요망된다

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제5권2호
• /
• pp.123-132
• /
• 1998

Let F and G denote the distribution functions of the failure times and the censoring variables in a random censorship model. Susarla and Van Ryzin(1978) verified consistency of $F_{\alpha}$, he NPBE of F with respect to the Dirichlet process prior D($\alpha$), in which they assumed F and G are continuous. Assuming that A, the cumulative hazard function, is distributed according to a beta process with parameters c, $\alpha$, Hjort(1990) obtained the Bayes estimator $A_{c,\alpha}$ of A under a squared error loss function. By the theory of product-integral developed by Gill and Johansen(1990), the Bayes estimator $F_{c,\alpha}$ is recovered from $A_{c,\alpha}$. Continuity assumption on F and G is removed in our proof of the consistency of $A_{c,\alpha}$ and $F_{c,\alpha}$. Our result extends Susarla and Van Ryzin(1978) since a particular transform of a beta process is a Dirichlet process and the class of beta processes forms a much larger class than the class of Dirichlet processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.398-403
• /
• 2005

This study investigates the change of the temperature and mechanical properties of the braking disk for the railway vehicle. The average temperature is measured about $100^{\circ}C$ and the maximum temperature is measured over $200^{\circ}C$ by non-contact sensor from Seoul to Chun-an. In the $20^{\circ}C-300^{\circ}C$, the 0.2% offset yield strengths of the disk (GC25-30 material) are a little down to the reference value, but the linear relation of tensile test result is not find from the linear change of temperature. However, JIC values have the inverse proportion to the temperature, and the JIC value at $200^{\circ}C$ decrease 30.55% from the JIC. value of the room temperature. This result means that the crack length on the braking disk is rapidly increase at $200^{\circ}C$.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.890-897
• /
• 2003

This paper compares engineering estimation schemes of C＊ and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C＊ and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C＊ and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C* and COD rate than the reference stress method.