• 한국재료학회지
• /
• 제7권2호
• /
• pp.114-120
• /
• 1997

$Ba(NO_{3})_{2}$와 $TiCl_{4}$의 혼합 수용액으로부터 전기화학법 중 음극혼원법(cathodic reduction method)을 이용하여 stainless steel기판 위에 $BaTiO_{3}$박막을 제조하였다. $BaTiO_{3}$전구체 박막은 혼합 수용액으로부터 반응초기에 $TiO_{2}{\cdot}nH_{2}O$M/형태로 우선적으로 형성되었으며, 일정 시간이 경과한 후에는 일정한 Ba/Ti몰비를 갖는 박막이 제조되었다. $BaTiO_{3}$박막 내 Ba/Ti조성비는 혼합 수용액 내에 존재하는 이온 조성비 $Ba^{2+}/Ti_{4+}$에 변화하였는데, 0.3M $Ba(NO_{3})_{2}$와 0.1M $TiCI_{4}$의 혼합 수용액과 $10mA/cm^2$의 전류를 흘려주는 조건에서 Ba/Ti의 조성비가 1에 가까운 박막을 얻을 수 있었다. 이러한 전구체 박막을 $500^{\circ}C$이상에서 열처리한 결고 페로브스카이트 상의 $BaTiO_{3}$박막이 제조되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권1호
• /
• pp.77-82
• /
• 1995

PTCR(Positive Temperature Coefficient of Resistivity) thermistor in thin film BaTiO$_{3}$ system was prepared by using radio frequency(13.56 MHz) and DC magnetron sputter equipment. Polycrystalline, surface structure, and R-T(Resistivity-Temperature) characteristics of the specimens were measured by X-ray diffraction(D-Max3, Rigaku, Japan), SEM(Scanning Electron Microscopy: M.JSM84 01, Japan), and insulation resistance measuring system (Keithley 719), respectively. Thin films characteristics of the thermistor showed different properties depending on the substrate even with the same sputtering condition. The thin film formed on the A1$_{2}$O$_{3}$ substrate showed a good crystalline and a low resistivity at below curie point. However, the thin films prepared on slide glass and Si wafer were amorphous. The thicknesses of the three samples prepared under the same process conditions were 700[.angs.], 637.75[.angs.], and 715[.angs.], respectively.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1108-1114
• /
• 1998

$BaTiO_3$ thin films preferred c-axis orientation for the potential application of ferroelectric memory devices were deposited on silicon substrates(100) by RF sputtering and annealed at 800 and 900[$^{\circ}C$] in air. The BT(100)/BT(110) peak ratio of the sputtered sample was decreased with post-annealing in air. According to increasing with annealing temperature and time, the peak ratio of BT(100)/BT(110) was decreased and the surface density of thin film was high. Dielectric characteristics of $BaTiO_3$ thin film was measured as a function of annealing temperature and frequency. The dielectric constants were increased with annealing and decreased with frequency by space charge polarization and dipole polarization below 600[kHz]. The remanent polarization and coercive field in P-E hysteresis loop of $BaTiO_3$thin film were increased with the annealing temperature in air. The remanent polarization and coercive filed annealed at 800[$^{\circ}C$] for 1hr were 1.2[$\mu$C/$cm^2$] and 200[kV/cm]

• 한국자기학회지
• /
• 제11권3호
• /
• pp.129-133
• /
• 2001

본 연구에서는 TiO$_2$ 하지층이 첨가된 hexagonal barium-ferrite(BaM) 박막을 RF/DC magnetron sputtering system을 이용하여 상온에서 증착한 후, 여러 온도에서 열처리하여 결정화하였다. BaM박막에 TiO$_2$ 하지층을 첨가하여 열처리한 경우 Si와 BaM의 (006), (106), (114), (217), (2011) peak들이 사라지고 (008)의 intensity가 낮아졌으며 SiO$_2$와 (116), (302)의 peak들이 성장하였음을 XRD pattern을 통하여 알 수 있었다. BaM 박막의 자기적 특성을 VSM을 통하여 알아본 결과, 보자력, 잔류자화, 각형비 등의 자기적인 특성들은 수직에 비해 수평이 더 좋게 나타났는데, 이러한 결과로 박막면에 평행한 방향으로의 자화용이축이 존재하고 있다는 것을 알 수 있었다. SEM을 통하여 증착압력 및 열처리 시간에 따른 결정화 정도와 자기적 특성을 알아본 결과 5 mTor 보다 10 mTrr에서 더 좋게 나타났으며, 열처리를 시작한 뒤 10분 이내에 750 $^{\circ}C$ 이상에서 대부분의 특성변화가 일어났음을 알 수 있었다.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ 박막은 ULSI-DRAM 즉 1-4 Gbit급 DRAM용 셀(cell) 커패시터의 새로운 유전물질로 각광받고 있다. 본 연구에서는 ICP 장비에서 $BCl_3/Cl_2/Ar$ 플라즈마로 (Ba,Sr)$TiO_3$ 박막을 식각하였다. 이때 RF power/dc bias voltage는 600W/-250V, 반응로의 압력은 10mTorr 이었다. $Cl_2/(Cl_2+Ar)$은 0.2로 고정하였고, $BCl_3$ 가스를 첨가하면서 (Ba,Sr)$TiO_3$ 박막을 식각하였다. $BCl_3$ 가스를 10% 첨가하였을 때, $480{\AA}/min$으로 (Ba,Sr)$TiO_3$ 박막은 가장 높은 식각 속도를 나타내었다. $Cl_2/Ar$가스에 $BCl_3$의 첨가 비에 따른 Cl, BCl 및 B의 라디칼 밀도를 optical emission spectroscopy(OES)에 의해 구하였다. $BCl_3$를 10% 첨가하였을 때 Cl의 라디칼 밀도가 가장 높았다. (Ba,Sr)$TiO_3$ 박막의 표면반응을 규명하기 위하여 XPS 분석을 수행한 결과 이온 bombardment 식각이 Ba-O 결합을 파괴하고 Ba와 Cl의 결합형태인 $BaCl_2$을 제거하기 위하여 필요하다. Sr과 Cl의 결합의 양은 많지 않고, Sr은 주로 물리적인 스퍼터링에 의하여 제거된다. Ti와 Cl은 화학적으로 반응하여 $TiCl_4$ 결합형태로 용이하게 제거된다. 식각후 단면사진을 SEM을 통해 본 결과 식각단면이 약 65~70$^{\circ}$ 정도였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.193-197
• /
• 1996

BaTiO$_3$films in pure Ar atmosphere were prepared by RF sputtering method at low substrate temperature(100$^{\circ}C$). The structural and crystallographic properties were studied with deposition conditions and annealing methodes. Deposition rates and structural properties of BaTiO$_3$ thin filles were investigated by the SEM and X-ray diffraction. The chemical composition of BaTiO$_3$ thin films grown on Si(100) wafer was studied by tole EDS and EPHA. The optimised Ar pressure and RF power were 8[mtorr] and 180[W], respectively. The thickness of BaTiO$_3$ thin films deposited at optimised conditions was ∼3400[${\AA}$], and the dielectric constant of the thin films heat-treated at 750[$^{\circ}C$] for 1[hr] was 259.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.516-524
• /
• 1995

In this study, to prepare the dielectric (Ba, Sr)TiO3 thin films by the sol-gel process, Titaminum (IV) sio-propoxide (Ti[OCH(CH3)2]4), Ba and Sr acetate were used for sol and thin films were prepared by dip-coating process. Stability of sol decreased with the increase of Sr, and thickness of thin films were obtained 0.13~0.17${\mu}{\textrm}{m}$ by 1 coating cycle. Transmittance of amorphous thin films heated at 500 and 55$0^{\circ}C$ was very good, and crystallization tendency of thin films according to heat-treatment temperature and crystallization characteristics of thin films heated at 11$0^{\circ}C$ for 3 hrs were analysed. As a result, good perovskite structure was obtained higher than 100$0^{\circ}C$, and tetragonality of thin film was decreased but pyrochlore was formed with increasing Sr. In case of addition to substitute 0.4mol% Sr for Ba, dielectric constant was 288 and loss factor (tan $\delta$) was 0.04.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.679-687
• /
• 2001

It is known that amorphous BaTiO$_3$ thin films have good insulating properties[1][2]. In this investigation, amorphous BaTiO$_3$ thin films were deposited by rf magnetron sputtering on thick BaTiO$_3$ films of AC powder EL devices which were fabricated by screen-printing. The electrical and optical properties of the EL devices were then investigated. Adding amorphous BaTiO$_3$ thin film, it showed that leakage current density was decreased. Especially, leakage current density was decreased more with he sample of 0.5-hour deposition than the sample of 4-hours deposition. This result led to the improvement of luminous efficiency by 11%. It could be concluded that proper amorphous BaTiO$_3$ thin film deposition improved the surface property of dielectric layer.

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.441-448
• /
• 1993

The Ba1-xSrxTiO3 thin films deposited on ITO-coated glass substrate at 55$0^{\circ}C$ by rf magnetron sputtering method have individual preferential orientations as a function of composition (X=0, 0.25, 0.5, 0.75, 1) due to the stress relief interactions among the intrinsic compressive stress, thermal tensile stress adn extrinsic compressive stress (compressive stress in case of BaTiO3(Tc=12$0^{\circ}C$) and Ba0.75Sr0.25TiO3(Tc=57$^{\circ}C$)). This behavior also appears on the (BaSr)TiO3 thin films (X=0.5) deposited on ITO-coated glass substrate at deposition temperature between 35$0^{\circ}C$ and 55$0^{\circ}C$. The composition of Ba1-xSrxTiO3 thin films deposited on ITO-coated glass substrate at 55$0^{\circ}C$ is close to stoichiometry (1.009~1.089 in A/B ratio), but the compositional deviation from a stoichiometry is larger as SrTiO3 is added. The morphology of Ba1-xSrxTiO3 thin films is very similar for over all substrate temperatures, and the roughness due to the differences of cluster size is the smallest at X=0.25.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.427-430
• /
• 2008

BaTiO3 and SrTiO3 thin films were fabricated on Pt/Ti/SiO2/Si substrate by the pulsed laser deposition process. The dependence of the deposited film quality upon the partial oxygen pressure during the deposition process was importantly examined. Regardless of the oxygen pressure, the as-deposited films were not fully crystallized. However, the film deposited at low oxygen pressure became well crystallized after the annealing process. It was concluded, therefore, that the partial oxygen pressure is reduced as low as possible during the deposition process and then anneal the as-deposited samples at ambient pressure to fabricate the well crystallized SrTiO3 and BaTiO3 films by laser ablation.