• 제목/요약/키워드: $BaAl_2O_4$

검색결과 163건 처리시간 0.032초

가거도(소흑산도)의 백악기 화산암류에 대한 암석화학적 연구 (Petrochemical Study on the Cretaceous Volcanic Rocks in Kageo island, Korea)

  • 김진섭;백맹언;성종규
    • 암석학회지
    • /
    • 제6권1호
    • /
    • pp.19-33
    • /
    • 1997
  • 본역의 지질은 백악기 경상누층군의 퇴적암, 이를 관입 또는 분출한 중성화산암류, 산성화산암류 및 제 4기 충적층으로 구성된다. 중성화산암류는 화성쇄설화산각력암, 석질화산력응회암, 안산암용암으로 구성되며, 산성화산암류는 데사이트질용결응회암 및 유문암용암, 유문암질응회암으로 구성된다. 본 연구에서는 중성 및 산성 화산암류에 대해 암석기재학적 연구와 신선한 시료 10개에 대한 암석화학적 특성을 고찰하고, K-Ar법에 의한 절대연대 측정을 실시하였다. 현미경 관찰에서 안산암용암은 사장석이 주 반정광물로 나타나며, 기질은 미정질 내지 은미정질로서 반정광물과 동일한 필로택시틱 조직을 보인다. 안산암질각력암은 퇴적암 및 안산암의 자력 암편을 포함한다. 테사이트질용결응회암은 현저한 파라택시틱 조직을 보이며, 유문암용암은 유상구조를 잘 보여 주고, 안산암의 암편을 함유하고 용결구조가 현저한 화산력용결응회암이 나타나는데, 유문암용암에서 기질의 함량은 80.9~ 89.3%에 이른다. 주 반정광물은 사장석이며 부분적으로 녹염석, 녹니석, 방해석, 제오라이트, 푸로필라이트 등으로 2차 변질되어 나타난다. 본역의 화산암류는 Norm값에 의한 Q-A-P 도표에서 현무암질안산암, 안산암, 데사이트, 유문암의 일련의 분화과정을 나타내고 대부눈 칼크알칼리 계열에 속한다. 화산암류의 화학조성은 $SiO_2$ 함량이 57.61~75.40 %이며, MgO, CaO, $Fe_2O_3$, $Al_2O_3$, $Ti_2$, MnO, $P_2O_5$ 등은 $SiO_2$함량이 증가함에 따라 연속적으로 증가하는 경향을 보인다. 주성분원소 및 미량 원소의 변화도에서 안산암질에서 유문암으로 분화되는, 즉 마그마의 정출 분화 특징을 뚜렷이 보여준다. REE 양상 및 spider 도표에서 일정한 분화 경향을 보이며 나란하다. spider 도표에서 본역의 화산암류는 Th, La, Nd, Gd 등이 부화되어 있으며, Ba, Nb, Sr, Hf, Zr 등이 결핍되어 있는 특징을 나타낸다. 안산암에서 유문암으로 분화가 진행될수록 Cs, Sr, Eu이 점차 결핍되는 경향이, Th가 증가하는 경향이 있고, Ba, Nb, Sr, Eu의 부(-)의 이상값이 점차 커지는 경향을 보인다. 희유 원소의 변화 경향에서 안산암과 중성 암맥, 데사이트와 유문암의 경향이 서로 일치함을 볼 수 있다. 주성분 원소 및 미량 원소 함량 변화는 본역의 화산암이 안산암으로부터 일연의 분별결정작용 산물임을 암시하며, 또한 $Al_2O_3$와 CaO 함량의 관계도, Th/Yb 비에 대한 Ta/Yb 비의 관계도, $Ce_N/Yb_N$$Ce_N$의 관계도에 따른 판별에서도 분별결정작용의 경향을 따르고 있다. 본역의 화산암은 $K_2O$, $Na_2O$, CaO 삼각도에서 도호의 영역에, Ba/La비, La/Th비에 의한 판별도에서 조산대의 high-K suite에 속한다. Rb 대 (Y+Nb)의 판별도 및 Hf-Th-Ta 지구조 판별도에서 지판이 침강 섭입하는 지판 경계부(destructive plate margin) 중 화산호의 조구적 영역에 도시된다. 본역의 화산암을 생성시킨 마그마는 $Al_2O_3$와 CaO 함량의 관계도, mode에서 나타나는 사장석 반정, 분화가 진행될수록 부의 Eu 이상이 증가하는 것 등에서 사장석의 분별이 우세한 분별결정작용을 거쳤음을 알 수 있다. 안산암질암을 관입한 중상 암맥에서 측정한 암석 년령은 $97.0{\pm}6.8~94.5{\pm}6.6$, 데사이트질암은 $68.9{\pm}4.8,\61.5{\pm}4.9~60.7{\pm}4.2$Ma으로 측정되었고, 이것은 백악기 유천층군과 대비되며, 백악기 유천층군 암석의 지화학적 자료와 본역 화산암의 지화하적 자료는 판별도 등에서 같은 영역에 도시된다.

  • PDF

$MnO_2$ 첨가량에 따른 $BaTiO_3$계의 PTC효과와 원적외선 방사특성에 관한 연구 (A study on the Radiation Properties of Far-infrared and PTC Effect in the $BaTiO_3$ system by $MnO_2$ Amounts of Additives)

  • 송민종;박춘배;강도열
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1993년도 춘계학술대회 논문집
    • /
    • pp.3-5
    • /
    • 1993
  • It is very important that a spectrum of reflectance is in accord wi th a spectrum of absorbance for a effective heating. Therefore. the objective of this study was to achieve a technical composite for material plan which PTC thermistor increase a radiation property of far-infrared and keep a characteristic of R-T The Ceramic speciman studies had the composition $BaTiO_3$ with additive of 1.67 $Al_2O_3$, 3.75 $SiO_2$, 1.25 $TiO_2$, 0.15 $Sb_2O_3$ and 0.00-0.182 $MnO_2$. $MnO_2$ amounts of additives was both increase on the anomalous resistivity-temperature characteristics and high efficiency on the radiation properties bodies of far-infrared. This result shows that specimens produced high emissivity(average 0.8) of far-infrared at 4.5-15$[{\mu}m]$ by measuring a characteristic of IR and R-T.

  • PDF

The Role of (111)MgO Underlayer in Growth of c-axis Oriented Barium Ferrite Films

  • Erickson, D.W.;Hong, Y.K.;Gee, S.H.;Tanaka, T.;Park, M.H.;Nam, I.T.
    • Journal of Magnetics
    • /
    • 제9권4호
    • /
    • pp.116-120
    • /
    • 2004
  • Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.

토양(土壤) 석회요구량(石灰要求量) 결정방법 (決定方法)의 실험적(實驗的) 고찰(考察) (Evaluation of Methods for Determining Lime Requirement of Soils)

  • 주진호;하상건;엄명호;임형식
    • 한국토양비료학회지
    • /
    • 제21권3호
    • /
    • pp.280-288
    • /
    • 1988
  • 강원도(江原道) 지역(地域)의 답토양(畓土壤)이 널리 분포(分布)되어 있는 석회암지대(石灰岩地帶), 하성충적충지대(河成沖積層地帶), 현무암지대(玄武岩地帶) 토양(土壤)을 대상(對象)으로 하여 석회요구량(石灰要求量) 결정방법(決定方法)간의 차이(差異)를 실험적(實驗的)으로 비교(比較), 검토(檢討)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 석회요구량(石灰要求量)을 결정(決定)하는 7가지 방법(方法)($CaCO_3$ incubation method, $BaCl_2$-TEA method, SMP-single buffer method, Double buffer method, Adams and Evans method, SMP-double buffer method, O. R. D. method)을 비교(比較)한 결과(結果) 방법(方法)간에 큰 차이(差異)가 있었다. 2. $CaCO_3$ incubation method를 기준(基準)으로 할 때 석회요구량(石灰要求量)은 $BaCl_2-TEA$ method가 가장 높았고, O.R.D. method 가 가장 적었으며, SMP-double buffer method가 강원도(江原道) 토양(土壤)에 비교적(比較的) 적합(適合)할 것으로 평가(評價)되었다. 3. 치환성(置換性) Al 함량(含量)의 100% 당량(當量)에 해당(該當)하는 $CaCO_3$를 가(加)하고 incubation한 경우 약(約) 70%의 중화율(中和率)을 나타냈다. 4. 활성(活性) Al 함량(含量)의 100% 당량(當量)에 해당(該當)하는 $CaCO_3$를 가(加)하고 incubation한 경우에는 약(約) 30%의 중화율(中和率)을 나타냈다. 5. 치환성(置換性) Al 및 활성(活性) Al 함량(含量)을 기준(基準)으로 한 석회요구량(石灰要求量)은 $CaCO_3$ incubation method에 비(比)해 적은 값을 나타냈다.

  • PDF

고온초전도체 $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ 박막의 Hall 효과 (Hall Effect of High $T_{c}$ superconductor $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ Thin Film)

  • 허재호;류제천;김형국;김장환
    • 한국자기학회지
    • /
    • 제4권1호
    • /
    • pp.44-47
    • /
    • 1994
  • Laser ablation법으로 c-축 배향되도록 만든 Y/sub 1/Ba/sub 2/Cu/sub 3/O/sub 7- .delta. / 박막으로 임계온도 근처에서 운반자들의 정보를 얻기위하여 Hall 효과를 연구하였다. 자기비저항은 Nernst 효과 때문에 자기장이 증가할 수록 offset 점의 온도가 낮았고, 자기비저항으로 부터 열자기적 효과를 고 려하여 계산한 Hall 비저항값과 실제 van der Pauw 법으로 측정한 Hall 비저항값을 비교해 본 결과 비교적 잘 일치하였다.

  • PDF

PDP 형광체의 진공 자외선 조사에 따른 열화 특성 (Degradation of PDP Phosphors Under VUV Excitation)

  • 이임렬;이수행;김유혁
    • 한국재료학회지
    • /
    • 제12권9호
    • /
    • pp.735-739
    • /
    • 2002
  • $(Y,Gd)BO_3$: Eu, $Zn_2$$SiO_4$ : Mn and $BaMgAl_{10}$ $O_{17}$ : Eu phosphors used in PDP were continuously irradiated by vacuum ultra violet generated from the penning gas (96%Ar+4%Xe) discharge and then the change of emitting intensity with time was investigated. The brightness of these phosphors decreased exponentially with VUV excitation time. The experimental data showed that the degradation rate increased in the order of $Zn_2$$SiO_4$ : Mn>(Y,Gd)$BO_3$: Eu>$BaMgAl_{10}$ $O_{17}$ : Eu phosphor. This different degradation property of phosphors was interpreted in terms of brightness saturation and stability against VUV irradiation. It was found that the degradation property of $(Y,Gd)BO_3$ : Eu red phosphor synthesized by ultrasonic thermal spray was superior to commercial phosphor.

분무열분해법에 의한 푸른색 발광 BAM 형광체 분말의 형태 조절 (Morphology control of blue-emitting BAM phosphor particles by the spray pyrolysis)

  • 강윤찬;노현숙
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.566-569
    • /
    • 1999
  • The blue emitting BAM Phosphor Particles with various compositions were Prepared by the spray Pyrolysis. The effect of composition on the morphology of BAM particles was Investigated. In the case of BaMgAl$_{10}$ /O$_{22}$ : Eu$^{2+}$, the morphology of particles with sphericity and non-aggregation characteristics disappeared after post-treatment at 1400 $^{\circ}C$ for 3 hrs. On the other hand, the ocher composition particles except BaMgAl$_{10}$ /O$_{22}$ : Eu$^{2+}$ maintained their original morphology after post-treatment, even if the particles were prepared at low temperatures in the spray pryrolysis. The BAM particles with MgAl$_{2}$/O$_4$as intermediate material at low post-treatment temperature had high thermal stability and maintained sphericity of particles after post-treatment. All the samples had main omission peak at 450 nm, which corresponds to blue emission. The optimum post-treatment temperature of BAM:Eu$^{2+}$ particles for the maximum PL(photoluminescence) intensity in the spray pylolysis was 1200 $^{\circ}C$ because of high crystallinity, Phase-Purity, and good morphology.ology.

  • PDF

경기육괴 북서부에 분포하는 백악기 명성산 화강암의 성인에 대한 지화학적 연구 (Geochemical Studies on Petrogenesis of the Cretaceous Myeongseongsan Granite in the Northwestern Gyeonggi Massif)

  • 이은지;박하은;박영록
    • 암석학회지
    • /
    • 제26권4호
    • /
    • pp.327-339
    • /
    • 2017
  • 경기육괴 북서부에 분포하는 백악기 명성산화강암은 암체의 대부분을 차지하는 담홍색의 흑운모 몬조 화강암과 상대적으로 소량 산출되는 백색의 흑운모 알칼리화강암으로 이루어져 있다. 낮은 Sr 함량과 높은 Ba 함량, REE 다이아그램에서 보여지는 부(-)의 Eu 이상치, 스파이더 다이아그램에서 나타나는 부(-)의 Sr 이상치, Sr과 Rb 사이에 나타나는 부의 관계, Sr과 Ba 그리고 Sr과 $Eu/Eu^*$ 사이에 나타나는 정(+)의 관계는 사장석과 K-장석의 정출이 마그마 분화과정에 있어 중요한 역할을 하였음을 지시한다. 명성산화강암은 I, S, A형 화강암을 분류하는 분류도에서 I & S 형 화강암 영역에 도시되는데, 흑운모 몬조화강암은 분화되지 않은 I & S 형 화강암 영역에, 흑운모 알칼리화강암은 분화된 I & S 형 화강암 영역에 도시됨으로 흑운모 알칼리화강암이 흑운모 몬조화강암보다 더 분화되어 생성된 화강암임을 알 수 있다. A/CNK vs A/NK 다이아그램에서 고알루미나 영역에 도시되는 명성산화강암의 근원암의 성질을 알아보기 위하여 Rb/Sr vs Rb/Ba 도와 $Al_2O_3/TiO_2$ vs $CaO/Na_2O$ 도에 도시한 결과 명성산화강암은 점토가 결핍된 근원암인 사질암과 잡사암 사이의 조성을 갖는 변성퇴적암류로부터 유래하였거나 이에 상응하는 화성암으로부터 유래하였으며, 전암 저어콘 포화 온도를 계산해 본 결과 $740-799^{\circ}C$ 온도 조건에서 용융되어 생성되었음을 알 수 있다.

High-$I_c$ single-coat YBCO films prepared by the MOD process

  • Lee, J.W.;Shin, G.M.;Yoo, S.I.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제13권4호
    • /
    • pp.22-25
    • /
    • 2011
  • A single-coat $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) film of high critical currents ($I_c$) could be successfully fabricated by optimizing the viscosity of the coating solution in the metal-organic deposition (MOD) process. From a Ba-deficient coating solution (Y: Ba: Cu = 1: 1.5: 3) having the viscosity of 212 $mPa{\cdot}sec$, 0.9 ${\mu}m$-thick single coat YBCO film with the $I_c$ value of 289 A/cm-width ($J_c$ = 3.2 MA/$cm^2$) at 77 K was achievable on the $SrTiO_3$ (STO) substrate, which was superior to that of our previous report for 0.8 ${\mu}m$-thick single coat YBCO film from a stoichiometric coating solution (Y: Ba: Cu = 1: 2: 3) on the $LaAlO_3$ (LAO) substrate. This result might be attributed to denser and more homogeneous microstrcuture in the case of the YBCO film from the Ba-deficient coating solution.

.Improved Photoluminescence of $BaMgAl_{10}O_{17}:Mn$ Under VUV Excitation

  • Lee, Hyun-Woo;Jung, Kyeong-Youl;Yang, Young-Suk;Kang, Yun-Chan
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.1083-1086
    • /
    • 2004
  • We applied the spray pyrolysis technique to prepare Mn-doped $BaMgAl_{10}O_{17}$ (BAM) particles with high photoluminescence, which could be used in the plasma display device as a green phosphor. Several preparation conditions were investigated in order to tail the vacuum ultraviolet (VUV) characteristics. Some portions of barium were replaced with strontium to improve the luminescent intensity of BAM:Mn particles under VUV excitation. The content of Mn and Sr was optimized to obtain high luminescent efficiency under VUV excitation. Finally, the optimized BAM:Mn green particles showed higher photoluminescence intensity than that of commercial $Zn_2SiO_4$ and comparable with commercial barium-aluminate phosphor.

  • PDF