• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.84-87
• /
• 2000

The microwave dielectric properties of complex perovskite-structured $Ba(Mg_{1/3}Ta_{2/3})O_3$ ceramics were investigated with calcining condition. The BMT ceramics were prepared by conventional mixed oxide method. Calcining conditions were $1200^{\circ}C$ for 10hr., $1300^{\circ}C$ for 2hr., and 5hr., respectively. And the specimens were sintered at $1650{\mu}m$. The structural and microwave properties of BMT ceramics were investigated by XRD, SEM and network analyzer. In the case of BMT ceramics calcined at $1300^{\circ}C$ for 5 hr., dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.26, 31,144(at 1GHz), 6.11[ppm/$^{\circ}C$], respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.110-114
• /
• 2001

$0.7Ba(Mg{\frac}_{1}{3}Ta{\frac}_{1}{3})O_3-0.3Ba({\frac}_{1}{3}Nb{\frac}_{1}{3})O_3ceramics$ were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500{\sim}1575[^{\circ}C]$ for 5 hours in air. The microwave dielectric properties of the specimens were investigated with sintering temperature. The 0.7BMT-0.3BCN ceramics showed typical XRD patterns of the complex perovskite structure. Dielectric constant and quality factor were increased with increasing the sintering temperature. In the case of the specimens sintered at $1575[^{\circ}C]$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency were good values of 28,23545 at 10[㎓] and -1.2 $[ppm/^{\circ}C]$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1561-1569
• /
• 1994

Effect of calcining temperature on the sintering behaviors and microwave dielectric properties of BMT[Ba(Mg1/3Ta2/3)O3] ceramics was studied. The calcining temperatures were varied from 80$0^{\circ}C$ to 130$0^{\circ}C$, respectively. It was found that, as calcining temperature lowered below 125$0^{\circ}C$, second phase such as Ba5Ta4O15 phases started to appear in calcined powder with unreacted powders. After sintering, exaggerately grown Ba5TaO3 phase could be found amang the uniform BMT grains in sintered body. Basis on the infiltration experiment, Ba0.05TaO3 phase should be formed by reaction of BMT grain and BaO-MgO eutectic liquid. But increase of calcining temperature above 125$0^{\circ}C$, there was not any second phase or unreated component in calcined powder and sintered body. As result, low calcining temperature led to precipitation of second phase in specimen and resulted decrease of Q value of BMT ceramics.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1299-1306
• /
• 1994

Effect of MgO content on microstructural evolution and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 system was investigated. MgO content was varied from 10 mol% deficiency to 10 mol% excess of stoichiometric composition, respectively. It was found that MgO-deficient specimen showed faster grain growth rate than stoichometric and MgO excess BMT system. Besides, sandwich type precipitates of Ba5Ta4O15 which was formed within the BMT grain, might lead to the anisotropic grain growth of BMT grain. On the contrary, in MgO excess specimen, BMT grain growth rate was retarded by precipitations of MgO phase in grain boundary. Besides, the Q values of MgO-deficient showed lower than MgO-excess due to precipitations of Ba5Ta4O15 within BMT grain.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.197-201
• /
• 2001

The microwave dielectric properties of (1-x)Ba(Mg$_{1}$3/Ta$_{2}$3/)O$_3$-xBa(Co$_{1}$3/Nb$_{2}$3)O$_3$(x=0.25~0.5) ceramics depending on the Ba(Co$_{1}$3/Nb$_{2}$3/)O$_3$[BCN] contents and the possibility of application as a microwave dielectric resonator were investigated. The specimens were prepared by he conventional mixed oxide method using there sintering temperature of 1575$^{\circ}C$. It was found that Ba(Mg$_{1}$3/Ta$_{2}$3/)O$_3$[BMT] and BCN formed a solid solution with complex perovskite structure. As the mole fraction of BCN increased, dielectric constant increased while temperature coefficient of resonant frequency decreased. The highest value of quality factor, Qxf$_{0}$=138,205GHz, obtained in the sample of 0.9BMT-0.1BCN ceramics. In the range of x$\geq$0.4, the dielectric constant was about 30. The 0.55BMT-0.45BCN ceramics showed excellent microwave dielectric properties with $\varepsilon$$_{r}$=30.84, Qxf$_{0}$=75,325GHz and $\tau$$_{f}$=2.9015ppm/$^{\circ}C$.EX>.EX>.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1664-1666
• /
• 2000

The structural and microwave properties of Ba($Mg_{1/3}Ta_{2/3})O_3$-Ba($Co_{1/3}Nb_{2/3})O_3$ ceramics were investigated with composition ratio. The specimens were sintered at 1525$^{\circ}C$ for 5 hours in air. All specimens exhibited superlattice reflection planes of (100), (111), (200), (201), and (112). Increasing mole ratio of BCN ceramics, the peak intensity of superstructure reflection plane were decreased, while dielectric constant was slightly increased. The dielectric constant and quality factor of the 0.8BMT-0.2BCN ceramics were 27.51, 103,681 [at 1GHz], respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.485-492
• /
• 2000

The sintering characteristics and the effects of density on dielectric properties in 0.2Ba(Mg$_{1}$3(Nb$_{2}$3/)O$_3$-0.8Ba(Mg$_{1}$3//Ta$_{2}$3/)O$_3$ceramics were investigated. The samples were made by the powder mixing techniques with the two step calcining conditions. When the 1st and the 2nd calcining temperatures were 120$0^{\circ}C$ and the sintering temperature was 155$0^{\circ}C$the density of samples showed the highest value (7.45 g/cm$^3$, 98.5% of theoretical density) among them. The dielectric constant of samples was nearly independent of density but the tan $\delta$ and the temperature coefficient of dielectric constant decreased linearly with increasing of the density. The quality factor(Q$\times$f), the temperature coefficient of resonance frequency and the dielectric constant of Ba[Mg$_{1}$3(Nb$_{0.2}$/Ta$_{0.8}$)sub 2/3/]O$_3$ceramic were 79,548 GHz, +1.5 ppm/$^{\circ}C$ and 26 in the microwave range, respectively.ely.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.98.1-98
• /
• 1993

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.111-111
• /
• 1992

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.221-224
• /
• 2000

The microwave dielectric properties of Ba(Mg$_{1}$3/Ta$_{2}$3/)O$_3$-xBa(Co$_{1}$3/Nb$_{2}$3/)O$_3$[BMT-BCN] ceramics were investigated. The specimens were prepared by the conventional mixed oxide method. It was found that Ba(Mg$_{1}$3/Ta$_{2}$3/)O$_3$ and Ba(Co$_{1}$3/Nb$_{2}$3/)O$_3$ formed a solid solution with complex perovskite structure. Increasing the BCN content, dielectric constant was increased, but temperature coefficient of resonant frequency was decreased. In the range of x$\geq$0.4, dielectric constant was about 30. 0.55BMT-0.45BCN ceramics showed excellent microwave dielectric properties with $\varepsilon$$_{r}$=30.84, Q$\times$f$_{0}$=75,325[GHz] and $\tau$$_{f}$=-2.9015[ppm/$^{\circ}C$].X>].